Restrictions For Sonet Bert On Cesopsn - Cisco ASR 900 Series Configuration Manual
Interface module configuration
Hide thumbs
Also See for ASR 900 Series:
- Release notes (310 pages) ,
- Manual (174 pages) ,
- Configuration manual (152 pages)
Table of Contents
Advertisement
Restrictions for SONET BERT on CESoPSN
Modes
SONET—AU-3 Mapping—AU3_T1
SONET—AU-4 Mapping—AU4_E1
Restrictions for SONET BERT on CESoPSN
• In the system-level BERT for CESoPSN, only the full timeslot is supported and the fractional timeslot
• In the BERT timeslot configuration, the timeslot should be same as the one provided in the CEM
• The BERT is supported either on the NxDS0 or DS1 side but not together.
Configuring VT1.5-T1 BERT for CESoPSN
To configure VT 1.5-T1 BERT, use the following commands:
enable
configure terminal
controller sonet 0/5/0
rate oc3
no ais shut
1-Port OC-192 or 8-Port Low Rate CEM Interface Module Configuration Guide, Cisco IOS XE Everest 16.7.x
(Cisco ASR 900 Series)
54
is not supported.
configuration.
Patterns
• 2^11—Pseudo-random test pattern that is 2,048
bits in length.
• 2^15—Pseudo-random O.151 test pattern that
is 32,768 bits in length. Error and Jitter
measurement of 1544, 2048, 6312, 8448, 32064,
44736 kbps.
• 2^20-O153—Pseudo-random O.153 test pattern
that is 1,048,575 bits in length.
• 2^20-QRSS—Pseudo-random QRSS O.151 test
pattern that is 1,048,575 bits in length.
• 2^11—Pseudo-random test pattern that is 2,048
bits in length.
• 2^15—Pseudo-random O.151 test pattern that
is 32,768 bits in length. Error and Jitter
measurement of 1544, 2048, 6312, 8448, 32064,
44736 kbps.
• 2^20-O153—Pseudo-random O.153 test pattern
that is 1,048,575 bits in length.
• 2^20-QRSS—Pseudo-random QRSS O.151 test
pattern that is 1,048,575 bits in length.
Configuring SONET
Advertisement
Table of Contents
