Associated Commands - Cisco ASR 900 Series Configuration Manual
Interface module configuration
Hide thumbs
Also See for ASR 900 Series:
- Release notes (310 pages) ,
- Manual (174 pages) ,
- Configuration manual (152 pages)
Table of Contents
Advertisement
Configuring CEM
CEM Int.
--------------------------------------------------------------
CEM0/1/0
CEM0/1/0
CEM0/1/0
CEM0/1/0
CEM0/1/0
• show cem circuit cem-id — Displays the detailed information about that particular circuit.
Router# show cem circuit 0
CEM0/1/2, ID: 0, Line: UP, Admin: UP, Ckt: ACTIVE
Controller state: up, T1/E1 state: up
Idle Pattern: 0xFF, Idle CAS: 0x8
Dejitter: 5 (In use: 0)
Payload Size: 192
Framing: Unframed
CEM Defects Set
None
Signalling: No CAS
RTP: No RTP
Ingress Pkts:
Egress Pkts:
CEM Counter Details
Input Errors:
Pkts Missing:
Misorder Drops:
Error Sec:
Unavailable Sec: 0
Pkts Malformed:
• show cem circuit summary — Displays the number of circuits which are up or down per interface
Router# show cem circuit summary
CEM Int.
--------------------------------------
CEM0/1/0
Associated Commands
The following commands are used to configure CEM:
Commands
cem
cem group cem-group-number unframed
ID
Line
1
UP
2
UP
3
UP
4
UP
5
UP
11060
11061
0
0
0
0
0
basis.
Total Active
1
1
1-Port OC-192 or 8-Port Low Rate CEM Interface Module Configuration Guide, Cisco IOS XE Everest 16.7.x (Cisco
Admin
Circuit
UP
ACTIVE
UP
ACTIVE
UP
ACTIVE
UP
ACTIVE
UP
ACTIVE
Dropped:
Dropped:
Output Errors:
Pkts Reordered:
JitterBuf Underrun:
Severly Errored Sec: 0
Failure Counts:
JitterBuf Overrun:
Inactive
0
URL
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-c1.html#wp2184138077
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-c1.html#wp2440628600
Associated Commands
AC
--/--
--/--
--/--
--/--
--/--
0
0
0
0
0
0
0
ASR 900 Series)
7
Advertisement
Table of Contents
