hit counter script
D-Link DAP-3520 User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Access Point
  5. DAP-3520 - AirPremier N Dual Band Exterior PoE Access...
  6. User manual
D-Link DAP-3520 User Manual

D-Link DAP-3520 User Manual

Airpremier n dual band exterior poe access point
Hide thumbs Also See for DAP-3520:
Table of Contents

Advertisement

Quick Links

See also: Command Line Interface Reference Manual , User Manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link DAP-3520

Summary of Contents for D-Link DAP-3520

  • Page 2: Table Of Contents

    Home > Advanced Settings > Router Settings > Advance Port Forwarding Home > Advanced Settings > Router Settings > MAC Filter Home > Advanced Settings > Router Settings > Firewall & DMZ D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 3 Maintenance > Administrator Settings > Ping Control Setting Maintenance > Firmware and SSL Certification Upload Maintenance > Configuration File Maintenance > Time and Date System > System Settings Help Troubleshooting Technical Specifications Warranty Registration Technical Support D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 4: Package Contents

    DAP-350 User’s Manual Package Contents Package Contents  D-Link DAP-3520 AirPremier N Dual Band Exterior PoE Access Point  Ethernet Cable  Manual on CD  DC 48V, 0.4A Power Adapter  Installation Guide If any of the above items are missing, please contact your reseller. Minimum System Requirements  Computers with Windows , Macintosh , or Linux-based operating systems with ® ® an installed Ethernet adapter  Internet Explorer version 7.0 and above or Firefox version 3.0 and above. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 5: Introduction

    With the DAP-3520, bandwidth-intensive applications like graphics or multimedia will benefit significantly because large files are now able to move across the network quickly. The DAP-3520 is capable of operating in one of five different wireless networking modes; access point, WDS (Wireless Distribution System) with AP, WDS, Wireless Client, or WISP Client Router mode.

  • Page 6: Features And Benefits

    **Please note that operating frequency ranges vary depending on the regulations of individual countries and jurisdictions. The DAP-3520 isn’t supported in the 5.25~5.35 GHz and 5.47 ~ 5.725 GHz frequency ranges in some regions. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 7: Wireless Basics

    DAP-350 User’s Manual Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide high-speed wireless connectivity that is easy to use within your home, business or public access wireless networks. D-Link wireless products provides you with access to the data you want, whenever and wherever you want it. Enjoy the freedom that wireless networking can bring to you. WLAN use is not only increasing in both home and office environments, but in public areas as well, such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are...

  • Page 8: Important Information

    This product should ONLY be installed by an experienced installer who is familiar with local building and safety codes and where ever applicable, is licensed by the appropriate authorities. Failure to do so may void the D-Link product warranty and may expose the end user or the service provider to legal and financial liabilities. D-Link and its resellers or distributors are not liable for injury, damage, or violation of regulations associated with the installation of outdoor units or antennas.

  • Page 9: Installation Considerations

    The D-Link DAP-3520 lets you access your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines: Keep the number of walls and ceilings between the DAP-3520 and other network devices to a minimum - each wall or ceiling can reduce your DAP-3520’s range by 3-90 feet (1-30 meters). Position your devices so that the number of walls or ceilings is minimized. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle, the wall appears to be over 42 feet (14 meters) thick! Position your devices so that the signal will travel straight through a wall or ceiling - instead of at an angle - for better reception.

  • Page 10: Five Operational Modes

    AP Wirelessly connect multiple networks Wireless Client AP acts as a wireless network adapter for your Ethernet- enabled device WISP Client Router Transforms your wireless AP into a WISP Client router D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 11: Getting Started

    DAP-350 User’s Manual Getting Started Getting Started You will need broadband Internet access. Consult with your cable or DSL provider for proper installation of the modem. Connect the cable or DSL modem to a router. See the printed Install Guide included with your router . See the printed Install Guide included with the DAP-3520 . If you are connecting a desktop computer to your network, install a wireless PCI adapter into an available PCI slot on your desktop computer. Install the drivers for your wireless CardBus adapter into a laptop computer. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 12 DAP-350 User’s Manual Getting Started Connecting PoE (Power over Ethernet) Connect one end of an Ethernet cable (included with your package) to the LAN port on the DAP-3520 and the other end of the Ethernet cable to either your computer or to your PoE switch. The AP can be powered on by a PoE switch or by the power adapter shipped with the AP. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 13 The link is up. Blinking Green Data is being transmitted. Light Off The link is down. WLAN Green Solid Green Wireless is ready. Blinking Green Data is being transmitted. Light Off Wireless is off. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 14: Using The Configuration Menu

    (http://192.168.0.50) and press Enter. Make sure that the IP addresses of the DAP-3520 and your computer are in the same subnet. After the connection is established, you will see the user identification window as shown. Note: If you have changed the default IP address assigned to the DAP-3520, make sure to enter the correct IP address.  Type “admin” in the User Name field.
  • Page 15 DAP-350 User’s Manual Using the Configuration Menu After successfully logging into the DAP-3520 the following screen will appear: When making changes on most of the configuration screens in this section, use the Apply button at the bottom of each screen to save your configuration changes.

  • Page 16: Home > Basic Settings > Wireless > Access Point Mode

    Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. The SSID can be up to 32 characters and is case-sensitive. SSID Visibility: Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. Auto Channel Selection: Enabling this feature automatically selects the channel that provides the best wireless performance. Enable is set by default. The channel selection process only occurs when the AP is booting up. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 17 Select 20 MHz if you are not using any 802.11n wireless clients. Auto 20/40 MHz allows you to both 802.11n and non-802.11n wire- less devices on your network. Authentication: Use the pull-down menu to choose Open System, Shared Key, WPA-Personal, or WPA-Enterprise. Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this option is not available. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 18: Home > Basic Settings > Wireless > Wds With Ap Mode

    Mode: Network Name (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. Enable or Disable SSID visibility. Enabling this feature broadcasts SSID Visibility: the SSID across the network, thus making it visible to all network users. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 19 Remote AP MAC Address: Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks. Site Survey: Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. . Authentication: Use the pull-down menu to choose Open System, Shared Key, or WPA-Personal. Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this option is not available. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 20: Home > Basic Settings > Wireless > Wds Mode 0

    Mode: Network Name (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. Enable or Disable SSID visibility. Enabling this feature broadcasts SSID Visibility: the SSID across the network, thus making it visible to all network users. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 21 Remote AP MAC Address: Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks. Site Survey: Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. Use the pull-down menu to choose Open System, Shared Key, or Authentication: WPA-Personal. Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the same WEP settings. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 22: Home > Basic Settings > Wireless > Wireless Client Mode

    Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network. SSID Visibility: This option is unavailable in wireless client mode. Auto Channel Enabling this feature automatically selects the channel that will pro- Selection: vide the best wireless performance. This feature is not supported in Wireless Client mode. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 23 Channel Width: Site Survey: Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. Authentication: Use the pull-down menu to choose Open System or WPA-Per- sonal. Select Open System to communicate the key across the network. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 24: Home > Basic Settings > Wireless > Wisp Client Router Mode 4

    Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network. SSID Visibility: This option is unavailable in wireless client mode. Auto Channel Enabling this feature automatically selects the channel that will pro- vide the best wireless performance. This feature is not supported Selection: in Wireless Client mode. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 25 Channel Width: Site Survey: Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. Use the pull-down menu to choose Open System or WPA-Per- Authentication: sonal. Select Open System to communicate the key across the network. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 26: Home > Basic Settings > Wireless > Open System Or Shared Key Authentication 6

    **Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F. is a code that represents *ASCII (American Standard Code for Information Interchange) English letters using numbers ranging from 0-127. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 27: Home > Basic Settings > Wireless > Wpa-Personal Authentication 7

    Cipher Type: or TKIP from the pull down menu. Group Key Update Select the interval during which the group key will be valid. The Interval: default value of 1800 is recommended. PassPhrase: When you select WPA-Personal, please enter a PassPhrase in the corresponding field. Confirm PassPhrase: Retype the PassPhrase in the corresponding field. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 28: Home > Basic Settings > Wireless > Wpa-Enterprise Authentication 8

    Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) allows you to use both WPA and WPA2. Cipher Type: When WPA-Enterprise is selected, you must also select a cipher type from the pull-down menu: Auto, AES, or TKIP. Group Key Update Select the interval during which the group key will be valid. 1800 is the recommended value as a lower interval may reduce Interval: data transfer rates. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 29 RADIUS server. RADIUS Port: Enter the RADIUS port. Enter the RADIUS secret. RADIUS Secret: Use the drop-down menu to Enable the accounting mode feature. Accounting Mode: Enter the IP address of the primary accounting server. You must Accounting Server: also configure the accounting port and the accounting secret. In addition, to a primary accounting server, the AP allows you to setup an optional backup accounting server. Accounting Port: Enter the accounting port. Accounting Secret: Enter the accounting secret. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 30: Home > Basic Settings > Lan

    IP address to the DAP-3520. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made. IP Address: The default IP address is 192.168.0.50. Assign a static IP address that is within the IP address range of your network. Subnet Mask: Enter the subnet mask. All devices in the network must share the same subnet mask. Enter the IP address of the gateway in your network. If there is a Default Gateway: gateway in your network, please enter an IP address within the range of your network. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 31: Home > Basic Settings > Internet Connection > Static Ip

    ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The DAP-3520 will not accept the IP address if it is not in this format. Use the drop-down menu to choose Static IP. The other three Internet choices are Dynamic IP (DHCP), PPPoE, and PPTP. Connection Type: The default IP address is 192.168.0.50. Assign a static IP address IP Address: that is within the IP address range of your network. Subnet Mask: Enter the subnet mask. All devices in the network must share the same subnet mask. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 32 ISP. The default MTU is 1500. Enable: The default MAC address is set to the WAN’s physical interface MAC address on the DAP-3520. You can tick this Clone MAC Address Enable check box to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the DAP-3520. It is not recommended that you change the default MAC address unless required by your ISP. MAC Source: Use the drop-down menu to select Auto or Manual. MAC Address: Manually enter an appropriate MAC address or click the Scan button to search for a specific MAC address.

  • Page 33: Home > Basic Settings > Internet Connection > Dynamic Ip (Dhcp)

    IP, PPPoE, and PPTP. Connection Type: The host name is optional but may be required by some ISPs. The Host Name: default host name is the model name of the device and may be changed. Primary DNS Enter the primary DNS (Domain Name Server) server IP address assigned by your ISP. Address: Secondary DNS Enter the secondary DNS (Domain Name Server) server IP address assigned by your ISP, if applicable. Address: D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 34 ISP. The default MTU is 1500. Enable: The default MAC address is set to the WAN’s physical interface MAC address on the DAP-3520. You can tick this Clone MAC Address Enable check box to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the DAP-3520. It is not recommended that you change the default MAC address unless required by your ISP. MAC Source: Use the drop-down menu to select Auto or Manual. Manually enter an appropriate MAC address or click the Scan button MAC Address: to search for a specific MAC address.

  • Page 35: Home > Basic Settings > Internet Connection > Pppoe

    Home > Basic Settings > Internet Connection > PPPoE Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. Use the drop-down menu to choose PPPoE. The other three choices Internet are Static IP, Dynamic IP (DHCP), and PPTP. Connection Type: Select Dynamic PPPoE (most common) or Static PPPoE. Use PPPoE Mode: Static PPPoE if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 36 ISP. The default MTU is 1492. Enable: The default MAC address is set to the WAN’s physical interface MAC address on the DAP-3520. You can tick this Clone MAC Address Enable check box to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the DAP-3520. It is not recommended that you change the default MAC address unless required by your ISP. Use the drop-down menu to select Auto or Manual. MAC Source: Manually enter an appropriate MAC address or click the Scan button MAC Address: to search for a specific MAC address...

  • Page 37: Home > Basic Settings > Internet Connection > Pptp

    Using the Configuration Menu Home > Basic Settings > Internet Connection > PPTP Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Use the drop-down menu to choose PPTP. The other three choices Internet are Static IP, Dynamic IP (DHCP), and PPPoE. Connection Type: Select Dynamic IP (DHCP) (most common) or Static IP. Use Static PPTP Mode: IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 38 ISP. The default MTU is 1400. Enable: The default MAC address is set to the WAN’s physical interface MAC address on the DAP-3520. You can tick this Clone MAC Address Enable check box to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the DAP-3520. It is not recommended that you change the default MAC address unless required by your ISP. Use the drop-down menu to select Auto or Manual. MAC Source: Manually enter an appropriate MAC address or click the Scan button MAC Address: to search for a specific MAC address.

  • Page 39: Home > Advanced Settings > Performance

    *Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead can lower actual data throughout rate. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 40 Short GI: Select Enable or Disable. Enabling a short guard interval can increase throughput. However, be aware that it can also increase the error rate in some installations due to increased sensitivity to radio-frequency installations. IGMP Snooping: Select Enable or Disable. Internet Group Management Protocol allows the AP to recognize IGMP queries and reports sent between routers and an IGMP host (wireless STA). When IGMP snooping is enabled, the AP will forward multicast packets to an IGMP host based on IGMP messages passing through the AP. Link Integrity: Select Enable or Disable. If the Ethernet connection between the LAN and the AP is disconnected, enabling this feature will cause the wireless segment associated with the AP to be disassociated from the AP. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 41 APs. If this function is enabled, when the number of users exceeds this value, the DAP-3520 will not allow clients to associate with the AP. User Limit (0 - 64): Set the maximum amount of users that are allowed access (0-64 users).To use this feature, the Connection Limit above must be enabled. For most users, a limit of 10 is recommended. The default setting is 20. Nework Utilization: Select a utilization percentage between 180, 60, 40, 20, or 0. When this network utilization threshold is reached, the device will pause one minute to allow for network congestion to dissipate. . D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 42: Home > Advanced Settings > Multi-Ssid

    Home > Advanced Settings > Multi-SSID The device supports up to eight multiple Service Set Identifiers. You can set the Primary SSID in the Basic > Wireless section. The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. Check to enable support for multiple SSIDs. Enable Multi-SSID: This read-only value is the current band setting. Band: Index: You can select up to seven multi-SSIDs. With the Primary SSID, you have a total of eight multi-SSIDs. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 43 Group Key Update Interval. Select Auto, AES, or TKIP from the pull-down menu. Cipher Type: Group Key Update Select the interval during which the group key will be valid. The Interval: default value of 1800 seconds is recommended. PassPhrase: When you select WPA-Personal, please enter a PassPhrase in the corresponding field. D-Link AirPremier N Dual Band Exterior PoE Access Point...
  • Page 44 Accounting Mode: When you select WPA-Enterprise, enter the IP address of the Accounting Server: primary accounting server. You must also configure the accounting port and the accounting secret. In addition, to a primary accounting server, the AP allows you to setup an optional backup accounting server. Accounting Port: Enter the accounting port. Accounting Secret: Enter the accounting secret. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 45: Home > Advanced Settings > Vlan > Vlan List

    DAP-350 User’s Manual Using the Configuration Menu Home > Advanced Settings > VLAN > VLAN List The DAP-3520 supports VLANs. VLANs can be created with a Name and VID. Mgmt (TCP stack), LAN, Primary/Multiple SSID, and WDS connection can be assigned to VLANs as they are physical ports. Any packet which enters the DAP-3520 without a VLAN tag will have a VLAN tag inserted with a PVID. The VLAN List tab displays the current VLANs. VLAN Status: Use the radio button to toggle to Enable. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab.

  • Page 46: Home > Advanced Settings > Vlan > Port List

    VLAN tagged packets as described in the IEEE 802.1Q standard. VLAN Status: Use the radio button to toggle to Enable. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. Port Name: The name of the port is displayed in this column. Tag VID: The Tagged VID is displayed in this column. Untag VID: The Untagged VID is displayed in this column. PVID: The Port VLAN Identifier is displayed in this column. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 47: Home > Advanced Settings > Vlan > Add/Edit Vlan

    Home > Advanced Settings > VLAN > Add/Edit VLAN The Add/Edit VLAN tab is used to configure VLANs. Once you have made the desired changes, click the Apply button to let your changes take effect. VLAN Status: Use the radio button to toggle to Enable. VLAN ID (VID): Provide a number between 1 and 4094 for the Internal VLAN. VLAN Name: Enter the VLAN to add or modify. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 48: Home > Advanced Settings > Vlan > Pvid Setting

    The PVID Setting tab is used to enable/disable the Port VLAN Identifier Auto Assign Status as well as to configure various types of PVID settings. Click the Apply button to let your changes take effect. Use the radio button to toggle to Enable. VLAN Status: PVID Auto Assign Status: Use the radio button to toggle PVID auto assign status to Enable. D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 49: Home > Advanced Settings > Intrusion

    DAP-350 User’s Manual Using the Configuration Menu Home > Advanced Settings > Intrusion The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Apply button to let your changes take effect. The choices include All, Valid, Neighbor, Rogue, and New. AP List: Click this button to initiate a scan of the network. Detect D-Link AirPremier N Dual Band Exterior PoE Access Point...

  • Page 50: Home > Advanced Settings > Schedule

    Enter a name for the new scheduling rule in the field provided. Day(s): Toggle the radio button between All Week and Select Days(s). If the second option is selected, check the specific days you want the rule to be effective on. All Days(s): Check this box to have your settings apply 24 hours a day. Wireless: Toggle the pull-down menu between Off and On. D-Link AirPremier N Dual Band Exterior PoE Access Point...

Table of Contents