Configuring Communication In Step 7 (Telegram 30) - Siemens SINAMICS G120 Function Manual
Frequency inverter
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
Activation
3.3 Activation via PROFIsafe
The status bit of a fail-safe input in status word 2 is always 0 if one of the following two
conditions is fulfilled:
● The relevant fail-safe input is not used.
● The inverter has deactivated the relevant fail-safe input due to a discrepancy.
3.3.6
Configuring communication in STEP 7 (telegram 30)
Hardware configuration
In STEP 7, the inverter is integrated in PROFIsafe communication via HW Config.
● Configure your SIMATIC CPU (e.g. a CPU315F-2 PN/DP) with a PROFIBUS network.
● Insert the inverter in the PROFIBUS network via its GSD.
● Assign the PROFIsafe telegram to the first slot of the frequency inverter.
● Assign standard telegram 1, for example, to the other slots of the inverter.
64
The operating instructions contain further information on the telegrams and slot
sequence.
Safety Integrated Function Manual, SINAMICS G120
Function Manual, 07/2010, FW 4.3.2, A5E03052391B AA
Hide quick links:
Advertisement
Table of Contents
