Examples For Cpd Enable; Debugging Cpd Functionality; Configuring Control Relationship Identifier - Cisco cBR-8 Configuration And Troubleshooting Manual
Cbr series converged broadband routers
Hide thumbs
Also See for cBR-8:
- Configuration manual (156 pages) ,
- Installation instructions manual (27 pages) ,
- Hardware installation manual (270 pages)
Table of Contents
Advertisement
Debugging CPD Functionality
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
cpd
Example:
Router (config)# cpd
Step 4
end
Example:
Router# end
Examples for CPD Enable
The following example shows the cpd enabled on a router:
Router (config)# cpd
Debugging CPD Functionality
To debug the CPD feature, use the debug cpd command in privileged EXEC mode. To disable debugging,
use the no form of this command.
Configuring Control Relationship Identifier
To configure a Control relationship identifier (CR ID) for CMTS, use the cpd cr-id command. When CPD
request comes with a wild-card CR ID, the CMTS will respond with this configured value.
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
102
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Enables CPD functionality
• Us the "no" form of this command to disable CPD
functionality.
Exits global configuration mode and enters privileged EXEC
mode.
Control Point Discovery
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
