Advertisement
Quick Links
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
Wear eye
instruction
Protection
manual
1. saFety
Danger! be aWare, leaD-aCiD batteries generate eXPlosive gases DUring norMal battery oPeration. For
tHis reason, it is very iMPortant to reaD anD FolloW tHese instrUCtions CareFUlly, eaCH tiMe yoU Use tHe
battery tester.
follow these instructions and those published by the battery and vehicle manufacturers, and the maker of any equipment you intend to use in
the vicinity of the battery. remember to review warning marks on all products and on engines.
1.1.
Personal safety
Warning! Wear approved eye protection. Wear appropriate Personal Protective equipment. A full range of Personal Protective
‰
equipment is available from your sealey dealer.
remove personal metallic items such as rings, bracelets, necklaces and watches. A lead-acid battery can produce a short-circuit
9
current high enough to melt or weld a ring, which would cause severe burns.
ensure that hands and clothing are clear of fan blades and other moving or hot engine parts. remove ties and ensure that belts
9
cannot become entangled.
ensure that there is another person within hearing distance and is able to come to your aid should a problem arise when working
9
near a lead-acid battery.
Have fresh water nearby in case battery acid contacts skin or clothing; flush affected area immediately. If acid enters eyes, flush
9
immediately with clean running water for a minimum of 15 minutes, seek medical attention.
Do not smoke or allow a spark or flame in the vicinity of the battery or engine.
8
1.2.
general safety
familiarise yourself with the application, limitations and potential hazards of the tester. Also refer to the vehicle manufacturer's hand
9
book. if in AnY douBt consult A QuAlified electriciAn.
Ensure that the tester is in good condition before use. If in any doubt do not use the unit and contact a qualified electrician.
9
only use recommended attachments and parts. to use unapproved items may be dangerous and will invalidate your warranty.
9
Keep tools and other items away from the engine and ensure that you can see the battery and working parts of engine clearly.
9
determine the system voltage before using the tester.
9
If the tester receives a sharp knock or blow the unit must be checked by a qualified service agent before using.
9
clean battery terminals before using the tester.
9
Keep children and unauthorised persons away from the work area.
9
Do not disassemble the tester for any reason. The tester must only be checked by qualified service personnel.
8
Warning! to prevent the risk of sparking, short circuit and possible explosion Do not drop metal tools in the battery area, or allow
‰
them to touch the battery terminals.
Do not cross-connect tester to battery. ensure positive (red) clamp is to positive terminal and negative (black) clamp is to
8
negative terminal. if battery symbols cannot be distinguished, remember that the negative terminal is the one directly connected to
the vehicle bodywork.
Do not use the tester outdoors, or in damp, or wet locations and Do not use in the vicinity of flammable liquids or gases.
8
ensure there is effective ventilation to prevent a build-up of explosive gases.
8
Do not use the tester for a task for which it is not designed.
8
When not in use, store the tester carefully in a safe, dry, childproof location.
Modern vehicles contain extensive electronic systems. You are required to check with the vehicle Manufacturer, for any specific
9
instructions regarding the use of this type of equipment on each vehicle.
2. introDUCtion
compact device which accurately tests battery, cranking and alternator. no heat, no sparks and no misdiagnosis. Just key in the battery rating
from the top of the battery and results are displayed on the lcd screen. includes a facility to print results via Pc. no internal battery and will test
batteries with a residual charge of just 8V. supplied with Pc software and instruction manual in storage pouch.
© Jack sealey limited
instructions for
Digital battery & alternator tester 12v
bt105
model no:
Wear
Wear
Protective
Protective
clothing
Gloves
Original Language Version
explosive
corrosive
material
substance
Bt105 | issue:1 09/05/16
Advertisement
Related Manuals for Sealey BT105
Summary of Contents for Sealey BT105
- Page 1 Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
-
Page 2: Specification
3. sPeCiFiCation model no.: ..............Bt105 rated Battery Voltage: ............12V. rating systems: ..ccA,Bci,cA,din,en,GB,iec,mcA,sAe. test ranges: ...........100-2000 ccA*ccA..............100-2000 ccA*Bci..............100-2000 ccA*cA..............100-1400 ccA*din..............100-2000ccA*en..............100-1400 ccA*GB..............100-1400 ccA*iec..............100-2000 ccA*mcA..............100-2000 ccA*sAe. -
Page 3: Operation
Press enter key to start test. good battery Healthy:96% 490ccA charge:98% 12.64V internal r=6.1mΩ rated:500A Good BAtterY there is no problem with the battery and is ok to use. Original Language Version Bt105 | issue:1 09/05/16 © Jack sealey limited... - Page 4 2. AGm flat Plate. 3. AGm sprial 4. Gel 5. efB Press Up/Down keys to select battery type then press enter key to confirm. the battery tester will test each battery according to the selected system and rating. Press Up/Down key to select according to the actual system standard and rating specified on the battery being tested. select input Original Language Version Bt105 | issue:1 09/05/16 © Jack sealey limited...
- Page 5 780ms cranking normal 10.13V When cranking test is abnormal,the battery test result will also be displayed at the same time Original Language Version Bt105 | issue:1 09/05/16 © Jack sealey limited...
- Page 6 “out of Vehicle” from main menu. main menu 1. Quick test 2. Battery in Vehicle 3. out of Vehicle 4. review data 5. Print data 6. system setup Original Language Version Bt105 | issue:1 09/05/16 © Jack sealey limited...
- Page 7 After testing remove clips from battery and store in a dry, childproof location. Original Language Version Bt105 | issue:1 09/05/16 © Jack sealey limited...
-
Page 8: Maintenance
After testing remove usB lead from computer / tester and store tester and leads in a dry, childproof location. 6. MaintenanCe Keep Battery tester, leads, disc and instructions clean and store in a dry, childproof location. Original Language Version Bt105 | issue:1 09/05/16 © Jack sealey limited... - Page 9 NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. iMPortant: no liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim. sole uK distributor, sealey Group. 01284 757500 www.sealey.co.uk Kempson Way, suffolk Business Park, Bury st.