Page 3
Please read these instructions first before using your appliance Thank you for choosing a Beko appliance. Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions.
Page 4
Please read these instructions first before using your appliance Thank you for choosing a Beko appliance. Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions.
CONTENTS 1 INSTRUCTIONS FOR SAFETY Adjusting the height of the upper basket ..........22 AND ENVIRONMENT General safety ........4 5 OPERATING THE PRODUCT 23 Intended use ..........4 On/Off key ........... 24 Children’s safety ........5 Programme Selection / Programme Disposing of packaging material ..5 Cancel key ..........
Instructions for safety and envIronment This section contains safety Never touch the plug with • instructions that will help to give wet hands! Never unplug by protection from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug.
Instructions for safety and envIronment This appliance is intended • Store all detergents and • to be used in household and additives in a safe place away similar applications such as: from the reach of the children. - Staff kitchen areas in shops, Disposing of packaging offices and other working material...
Instructions for safety and envIronment Compliance with WEEE Directive and Disposing of the Waste Product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation To make the product ready for use, make Do not install the product at places • sure that the electricity, tap water supply where temperature may fall below 0ºC. and water drainage systems are appropriate Place the product on a rigid floor. Do •...
Installation Connection to the drain Drainpipe must be connected to the foul water system and it Water discharge hose can directly be should not be connected to any connected to the drain hole or sink’s surface water drain. drainage. The length of this connection must be min.
Installation This appliance must Green and yellow be earthed or green If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock hazard if inserted into a socket...
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Cleaning, rinsing and drying performance of efficient manner. your dishwasher will increase when water Wipe away any coarse food remnants on the softening system is adjusted properly.
Page 15
Preparation Use the test strip supplied with the product according to the steps given below to determine hardness level of your supply water. Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for...
Preparation If you move your house, it is necessary to readjust water hardness level of your machine by considering the information given above according to the hardness level of the supply water in your new location. Your machine will display the most recently adjusted water hardness level.
Preparation Since different salt brands in the market have different particle sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours. Therefore, Salt Indicator remains on for a 2. Put suggested amount of powder, while after adding salt into the liquid/gel or tablet detergent in the machine.
Preparation The best washing performance in dishwashers is obtained by using detergent, rinse aid and water softening salt individually. Observe the instructions of the detergent manufacturer on the package when using tablet detergents. Contact the detergent manufacturer if your dishes Use powder or liquid/gel are wet and/or if you notice detergent in short programmes...
Preparation Rinse aid 4. If there are stains on tableware items after washing, level must be increased The rinse aid used in and if there is a blue trace after wiping dishwashers is a special them by hand, it must be decreased. combination that aims to This is set to position 3 as factory increase drying efficiency and...
Preparation Placing the dishes into the dishwasher You can use your dishwasher in the optimum way with respect to energy consumption and washing and drying performance only if you place the dishes in an orderly way. Wipe away any coarse food remnants •...
Page 21
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware Dishwasher / User’s Manual 19 / 43 EN...
Preparation Cutlery basket Upper basket multipurpose service rack Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an This accessory located at the upper basket efficient manner. of your machine allows you to easily wash Since the cutlery basket can be moved (A, pieces such as extra long ladles and bread B), you can create more space while placing...
Preparation Collapsible lower basket tines There are foldable tines (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each tines individually or all of them at once.
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket (DIN15310 ONLY) Hold the upper basket wires with both The upper basket height adjustment hands, slightly lift up the basket and mechanism has been designed for you to simultaneously push and release the create large spaces in the lower or upper...
OperatIng the product On/Off key 3. Selected programme will start when you close the door of your machine. When you press the On/Off key, the product that is in the On position will switch on with the Eco programme. Programme Selection / Programme Cancel key Select the programme by pressing the desired programme key.
OperatIng the product Auxiliary functions Tablet detergent function Allows to obtain a better drying Washing programmes of your dishwasher performance from the multi-purpose are designed to obtain the best cleaning detergents called as all in one detergents effect, considering the type of the soiling, such as 2in1, 3in1, 4in1, 5in1 and etc., soiling degree and properties of the dishes depending on the hardness level of the tap...
OperatIng the product Programming the washing Changing Warning Sound Volume After turning on your machine, press time and hold the Time Delay and Start / Time Delay Pause / Cancel keys respectively. If an economical electricity tariff is applied 2. Using the Time Delay key, turn on 9 and in your region, you can use the time delay 6 LEDs.
OperatIng the product Cancelling the programme Auxiliary functions cannot be set after the programme has Press and hold the Programme Selection started. / Programme Cancel keys for 3 seconds. Release the key as the Start indicator starts To cancel the time delay function flashing.
OperatIng the product Adjusting the amount of For energy saving, the machine rinse aid is automatically switched off following the completion of After turning on your machine, press the programme or when the and hold the Time Delay and Start / programme is not started.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 36
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 37
Troubleshooting There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. • Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section “Cleaning and Care”.
Page 38
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 39
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
Repairs necessary as a direct or indirect result of: Accidental damage, misuse or abuse of a product. An attempted repair of a product by anyone other than a Beko Approved Engineer (the “Engineer”). Installation or use of a product where such installation or use fails to meet the requirements contained in this guarantee or the User Instructions Booklet.
Page 41
Guarantee • Repairs to a product operated at any time on commercial or non-residential household premises (unless we have previously agreed to the installation environment). This guarantee is limited to the cost of repairing the product. To the extent permitted by law, the Manufacturer does not accept and will not be held liable for any financial loss incurred in connection with the failure of any product to operate in accordance with the expected standards.
Page 42
If you are resident in the Republic of Ireland, this guarantee will be governed by Irish law and the Irish courts will have jurisdiction. This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Hertfordshire. WD18 8QU.
Page 43
Please take a few moments to complete the details below, as you will need this information when you call us, or to use our online services. When you call us you may be required to input your serial number into your telephone keypad. For help please visit beko.co.uk/ support/model-finder •...
Page 44
Contact Us and choose a product support topic from the list of options. Complete the required details and click send message. Product registrations For UK registrations please visit beko.co.uk/register and for the Republic of Ireland visit beko. ie/register. /43 EN...