hit counter script

Configuring Logging Timestamps - Cisco Nexus 3548 series Configuration Manual

Nx-os system management, release 7.x
Hide thumbs Also See for Nexus 3548 series:
Table of Contents

Advertisement

Configuring Logging Timestamps

Step 4
Step 5
Step 6
Step 7
Step 8
Example
The following example shows how to configure the severity level of module and specific facility
messages:
switch# configure terminal
switch(config)# logging module 3
switch(config)# logging level aaa 2
Configuring Logging Timestamps
You can configure the time-stamp units of messages logged by the Cisco Nexus Series switch.
Procedure
Step 1
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
42
Command or Action
(Optional) switch(config)# no logging module
[severity-level]
(Optional) switch(config)# no logging level
[facility severity-level]
(Optional) switch# show logging module
(Optional) switch# show logging level [facility]
(Optional) switch# copy running-config
startup-config
Command or Action
switch# configure terminal
Configuring System Message Logging
Purpose
To apply the same severity level to all facilities,
use the all facility. For defaults, see the show
logging level command.
If the default severity and current
Note
session severity of a component is
the same, then the logging level for
the component will not be displayed
in the running configuration.
Disables module log messages.
Resets the logging severity level for the
specified facility to its default level. If you do
not specify a facility and severity level, the
switch resets all facilities to their default levels.
Displays the module logging configuration.
Displays the logging level configuration and
the system default level by facility. If you do
not specify a facility, the switch displays levels
for all facilities.
Copies the running configuration to the startup
configuration.
Purpose
Enters global configuration mode.

Advertisement

Table of Contents
loading

Table of Contents