COLOR TELEVISION RECEIVER COLOR TELEVISION RECEIVER Chassis : K15A Model: TXJ1366 TXJ1367 TXJ1396 TXJ1966 TXJ1996 CONTENTS Precautions Specifications Disassembly and Reassembly Alignment and Adjustments Troubleshooting Exploded Views and Parts List Electric Parts List Block Diagram PCB Layout Wiring Diagrams Schematic Diagrams...
The current measured should not exceed 0.5 milliamp. Reverse the power- plug prongs in the AC outlet and repeat the test. Samsung Electronics DEVICE UNDER TEST TEST ALL EXPOSED METAL...
Page 3
) or ( Use replacement components that have the same ratings, especially for flame resistance and dielectric strength specifications. A replacement part that does not have the same safety characteristics as the original might create shock, fire or other hazards. Samsung Electronics...
Page 4
Make sure that the portion around the serviced part has not been damaged. Samsung Electronics 5. Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels, input terminals and earphone jacks).
Page 5
9. Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes together, or lifting a foot from a carpeted floor can generate enough static electricity to damage an ESD. Samsung Electronics...
Disassembly and Reassembly 3. Disassembly and Reassembly 3-1 Back Cover Removeal Fig. 3-1 1. After removing the screws, pull the cabinet backwards. Samsung Electronics...
Page 9
3. Remove the main board by pulling it with both hands. Warning: The FBT is charged with high voltage. Before removing the Anode Cap, discharge the voltage through one of the heat sinks on the main board. Fig. 3-3 Samsung Electronics...
Page 10
Disassembly and Reassembly 3-3 Speaker Removal 1. Loosen the screws and remove the speakers. Fig. 3-4 Samsung Electronics...
Page 11
(1) Always lift the picture tube by grasping it firmly around the face- plate, (2) Never lift the tube by its neck. (3) Do not scratch the picture tube or apply excessive pressure. Fractures of the glass may cause an implosion. Fig. 3-5 Samsung Electronics...
SVC : MUTE Select a mode to be adjusted, using the chan- nel down key. Example: VCO. SVC : MUTE Samsung Electronics Alignment and Adjustments Change the data with “Volume +, - “ keys. Return to the Service mode by pressing MENU.
0~27 0~27 RED-CUT OFF Adjustment 0~255 GREEN-CUT OFF Adjustment 0~255 BLUE-CUT OFF Adjustment 0~255 GREEN-GAIN Adjustment 0~255 BLUE-GAIN Adjustment 0~255 0~63 VERTICAL SIZE Adjustment 0~63 VERTICAL CENTER Adjustment HORIZONTAL Phase Adjustment 0~31 SUB-SHARPNESS Adjustment 0~31 Samsung Electronics Initalized MICOM Data...
Page 14
TV and allow the failsafe circuit more than 30 seconds to reset. Then switch power ON to produce normal picture and sound. Samsung Electronics 4-2-5 IC902 Replacement 1. When IC902 is replaced, all values are reset to “Initialized MICOM Data” and readjustment is necessary.
Page 15
6. Adjust SCR to 2.4 ± 0.1Vp-p (black and 2.5V 0.1Vpp 7. Remove the short across D208 and restore Contrast and Sub-Tint adjustments. still be switched OFF. erator (PM5518). BG are 140 and GG should be 90. red levels). ABL. 2.4V 0.1Vpp Samsung Electronics...
Page 16
3. Enter the Service Mode and set SB to the point where the 5th point is brighter in the gray scale. Samsung Electronics 4-2-13 Vertical Size Adjustment 1. Input a lion head pattern. 2. After the vertical center adjustment, enter into 3.
Abnormal Check Abnormal (0 ~ 15V) IC801 Pin 3 B + . Check/Replace Normal (15~20V) D806, Q401, Q801, D802, D814* Normal (0.5 ~ 3V) Abnormal (0V) Check IC801* Pin 4 Voltage Check/Replace Check/Replace DZ802, DZ803, D806 PC802, DZ807 Samsung Electronics...
Page 19
IC602 Pins 4. Voltage of IC601 and IC602 Check SIF (L201). Check Power 12V Line Voltage. Abnormal Check CN601 and CN701 Connector Soldering and A/V PCB. Check Normal Abnormal Check Normal (approx. 12V) Pin 5. Abnormal Replace IC601 and IC602. Samsung Electronics...
Page 20
5-3 Horizontal Line Appears Abnormal Waveform of IC201 Check Whether a horizontal line appears in the service mode.. Check/Replace Check/Replace IC201. Samsung Electronics Single Horizontal Line Check Normal (24V) 24V-C Voltage. Check Pins 22,24. Normal IC301. Troubleshooting Abnormal Check FBT Pin 2 (24V) Oscillation.
Page 21
Replace tuner. Normal Check whether AGC and Abnormal AFTadjustment are normal in the service mode. Normal Readjust AGC and AFT. Check IC201 Pin 47 waveform level. Normal (2Vp-p) Check IC201 Pin 37 waveform level. Samsung Electronics Normal Check waveform. Abnormal...
7. Electric Parts List Part Differences (by screen size) ... TXJ1366 (TXJ1996 and TXJ1366 Dissimilar Parts) TXJ1996 Samsung Electronics Electric Parts List...