Table of Contents
Advertisement
I
N S TA L L AT I O N
Connecting to a Cable Box that Descrambles All Channels
1
Find the cable that is con-
nected to the ANTENNA
OUT terminal on your
cable box.
2
Connect the other end of
this cable to the VHF/UHF
antenna
terminal on the back of
the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
1
Find and disconnect the
cable that is connected to
the ANTENNA IN
terminal on your
cable box.
2
Connect this cable to a
two-way splitter.
3
Connect a coaxial cable
between an OUTPUT ter-
minal on the splitter and
the IN terminal on the
cable box.
2.3
C
T
: I
HAPTER
WO
NSTALLATION
This terminal might be labeled
"ANT OUT," "VHF OUT," or simply,
"OUT."
This terminal might be labeled
"ANT IN," "VHF IN," or simply,
"IN."
Hide quick links:
Advertisement
Table of Contents
