CD/DVD Player
Reference Guide/Guide de référence
DVP-SR510H
© 2012 Sony Corporation Printed in China
Important Safety Instructions
English
1) Read these instructions.
2) Keep these instructions.
WARNING
3) Heed all warnings.
4) Follow all instructions.
To reduce the risk of fire or electric shock, do
5) Do not use this apparatus near water.
not expose this apparatus to rain or moisture.
6) Clean only with dry cloth.
To avoid electrical shock, do not open the
7) Do not block any ventilation openings. Install in
cabinet. Refer servicing to qualified personnel
accordance with the manufacturer's
only.
instructions.
The AC power cord must be changed only at a
8) Do not install near any heat sources such as
qualified service shop.
radiators, heat registers, stoves, or other
Batteries or batteries installed apparatus shall
apparatus (including amplifiers) that produce
not be exposed to excessive heat such as
heat.
sunshine, fire or the like.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
CAUTION
plug has two blades with one wider than the
The use of optical instruments with this product will
other. A grounding type plug has two blades
increase eye hazard. As the laser beam used in this
and a third grounding prong. The wide blade or
CD/DVD player is harmful to eyes, do not attempt
the third prong are provided for your safety. If
to disassemble the cabinet.
the provided plug does not fit into your outlet,
Refer servicing to qualified personnel only.
consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified by
the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
This symbol is intended to alert the user
the apparatus. When a cart is used, use caution
to the presence of uninsulated
when moving the cart/apparatus combination
"dangerous voltage" within the
to avoid injury from tip-over.
product's enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
This symbol is intended to alert the user
to the presence of important operating
13) Unplug this apparatus during lightning storms
and maintenance (servicing)
or when unused for long periods of time.
instructions in the literature
14) Refer all servicing to qualified service personnel.
accompanying the appliance.
Servicing is required when the apparatus has
been damaged in any way, such as power-
Precautions
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
ˎ To prevent fire or shock hazard, do not place
ˎ
the apparatus has been exposed to rain or
objects filled with liquids, such as vases, on the
moisture, does not operate normally, or has
apparatus.
been dropped.
ˎ The player is not disconnected from the AC power
ˎ
source as long as it is connected to the wall
outlet, even if the player itself has been turned
Region code
off.
ˎ Do not install this player in a confined space, such
ˎ
Your player has a region code printed on the back
as a bookshelf or similar unit.
of the unit and only will play commercial DVDs
ˎ Install the player so that the AC power cord can
ˎ
labeled with an identical region code or
be unplugged from the wall socket immediately
in the event of trouble.
Copyrights and trademarks
ˎ If the player is brought directly from a cold to a
ˎ
ˎ Manufactured under license from Dolby
ˎ
warm location, or is placed in a very damp room,
Laboratories. Dolby and the double-D symbol are
moisture may condense on the lenses inside the
trademarks of Dolby Laboratories.
player. Should this occur, the player may not
ˎ "DVD Logo" is a trademark of DVD Format/Logo
ˎ
operate properly. In this case, remove the disc
Licensing Corporation.
and leave the player turned on for about half an
ˎ MPEG Layer-3 audio coding technology and
ˎ
hour until the moisture evaporates.
patents licensed from Fraunhofer IIS and
Thomson.
For customers in the USA
ˎ Windows Media is either a registered trademark
ˎ
Owner's Record
or trademark of Microsoft Corporation in the
The model and serial numbers are located at the
United States and/or other countries.
rear of the unit. Record the serial number in the
This product contains technology subject to
space provided below. Refer to them whenever you
certain intellectual property rights of Microsoft.
call upon your Sony dealer regarding this product.
Use or distribution of this technology outside of
Model No.______________
this product is prohibited without the appropriate
Serial No.______________
license(s) from Microsoft.
ˎ This DVD player incorporates High-Definition
ˎ
Multimedia Interface (HDMI™) technology. HDMI,
CAUTION
the HDMI Logo, and High-Definition Multimedia
You are cautioned that any changes or
Interface are trademarks or registered trademarks
modifications not expressly approved in this
of HDMI Licensing LLC in the United States and
manual could void your authority to operate this
other countries.
equipment.
ˎ This product meets ENERGY STAR
ˎ
energy efficiency.
Note
ENERGY STAR and the ENERGY STAR mark are
This equipment has been tested and found to
registered U.S. marks.
comply with the limits for a Class B digital device,
ENERGY STAR is a registered mark owned by the
pursuant to Part 15 of the FCC Rules. These limits
U.S. government.
are designed to provide reasonable protection
ˎ All other trademarks are trademarks of their
ˎ
against harmful interference in a residential
respective owners.
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
ˋ Reorient or relocate the receiving antenna.
ˎ
ˋ Increase the separation between the equipment
ˎ
and receiver.
ˋ Connect the equipment into an outlet on a circuit
ˎ
different from that to which the receiver is
connected.
ˋ Consult the dealer or an experienced radio/TV
ˎ
technician for help.
4-447-481-22(1)
Control Menu Display
Selects the effects to be used for changing
slides during a slide show.
Press DISPLAY.
MODE 1: Random
To change the Control Menu display, press
MODE 2: From top left
DISPLAY again.
MODE 3: From top
The available items differ depending on the
MODE 4: From left
disc/file or the situation.
MODE 5: From the center
Selects the media type you want to play.
VIDEO: Plays video files.
PHOTO (MUSIC): Plays photo and music files
as a slide show when music and photo files
are placed in the same album.
PHOTO: Plays photo files.
MUSIC: Plays music files. To play music with
lyrics, press SUBTITLE while playing music
files that contain MP3 ID3 Lyrics.
ˎControl Menu items : "Menu list"
CUSTOM menu
Selected item options
ˎNumber of titles
Number of chapters
OSD (On-Screen Display): Switches the
Playing time
display language on the screen.
ˎPlayback status
MENU: Selects the language for the DVD
Media type
VIDEO's menu. When you select "OTHERS
," select and enter a language code.
ˎSelected Control Menu item
"LANGUAGE CODE LIST"
Operation message
AUDIO: Switches the language of the sound
track recorded on the DVD VIDEO. When you
Menu list
select "ORIGINAL," the language given
priority in the disc is selected.
TITLE/SCENE/TRACK
SUBTITLE: Switches the language of the
CHAPTER/INDEX
subtitle recorded on the DVD VIDEO. When
you select "AUDIO FOLLOW," the language for
TRACK
the subtitles changes according to the
TIME/TEXT
language you selected for the sound track.
TOP MENU/MENU
ORIGINAL/PLAY LIST
TV TYPE: Selects the aspect ratio of the
PROGRAM
connected TV.
Select "SET ," then press ENTER and select
the title (T), chapter (C), or track (T) you want
to program, and press ENTER. Press .
SHUFFLE
REPEAT
A-B REPEAT
Select "SET ," then press ENTER. Select
point A and point B by pressing ENTER.
PARENTAL CONTROL
Playback of some DVD VIDEOs can be limited
according to a predetermined level such as
the age of the users. Scenes may be blocked
or replaced with different scenes.
SCREEN SAVER: When set to "ON," the
PLAYER : Enter your 4-digit password,
screen saver appears when the player is in
then press ENTER. Select the level in "LEVEL."
pause or stop mode for 15 minutes. Press
The lower the value, the stricter the
to turn off the screen saver.
limitation. Select an area in "STANDARD."
BACKGROUND: Selects the background color
When you select "OTHERS," select and
enter a standard code. "PARENTAL
or picture on the TV screen. If you set "JACKET
PICTURE," even though the disc does not
CONTROL AREA CODE LIST"
PASSWORD : Enter a 4-digit password.
contain a jacket picture, the "GRAPHICS"
picture appears.
If you forget your password, enter "199703" in
BLACK LEVEL: Selects the black level (setup
the password box, press ENTER, and then
level) for video signals output from the jacks
enter a new 4-digit password.
other than HDMI OUT.
SETUP
MODE (PROGRESSIVE): If you select "AUTO,"
You can adjust various settings when the
the player detects the format (film-based or
player is in stop mode.
video-based), and converts to the
QUICK: Adjusts the basic settings.
appropriate version.
CUSTOM: "CUSTOM menu"
4:3 OUTPUT: This setting is effective only
RESET: Returns the settings in "SETUP" to the
when you set "TV TYPE" to "16:9." Select
.
default setting.
"FULL" when you can change the aspect ratio
ZOOM
on your TV.
During zoom, scroll using ///.
ANGLE
AUTO PLAY: When set to "ON," the player
CUSTOM PICTURE MODE
automatically starts playback when the
Selects the picture quality.
player is turned on.
STANDARD: Displays a standard picture.
PAUSE MODE: Selects the picture in pause
DYNAMIC: Produces a bold dynamic picture.
mode for DVDs. Normally select "AUTO."
CINEMA: Enhances details in dark areas.
When the picture is output in high resolution,
MEMORY : Adjusts the picture in greater
set to "FRAME."
detail.
TRACK SELECTION: Gives the sound track
which contains the highest number of
SHARPNESS
channels priority when you play a DVD VIDEO
Exaggerates the outline of the image.
on which multiple audio formats (PCM, DTS,
1: Enhances the outline.
or Dolby Digital format) are recorded. If you
2: Enhances the outline more than 1.
select "AUTO," priority is given.
AV SYNC
IMAGE QUALITY: Selects the priority to either
high quality image or quick speed to display
Adjusts the delay between the picture and
photo files.
sound. Select "SET ," then press ENTER.
guidelines for
MULTI-DISC RESUME: Switches the Multi-
Press /, then press ENTER. This function is
disc Resume setting on or off. Resume
not effective when you use the DIGITAL OUT
playback can be stored in memory for up to
(COAXIAL)/HDMI OUT jack and set "DOLBY
6 different DVD VIDEOs/VIDEO CDs. If you
DIGITAL"/"DTS" in "AUDIO SETUP" to "DOLBY
start the settings again, the resume point is
DIGITAL" and "ON" respectively.
cleared.
SCREEN READER: Reads text displayed on
Items for DATA files
the screen. This function is available only
when the language is set to English on "OSD."
ALBUM (music/photo)
When you select "ON," settings in "AUDIO
FILE (photo)
SETUP" will be fixed as follows and audio
output will be changed to 2 channels linear
ALBUM (video)
PCM.
FILE (video)
ˋ "DOLBY DIGITAL" is set to "D-PCM."
ˎ
ˋ "DTS" is set to "OFF."
ˎ
DATE
ˋ "48kHz/96kHz PCM" is set to "48kHz/16bit."
ˎ
INTERVAL
When you select "ON," resume playback
cannot be used for playing music and photo
Specifies the duration for which the slides are
files or playing music files.
displayed on the screen.
You can also set the SCREEN READER
function to "ON" by pressing 5
the remote in order during standby mode.
EFFECT
AUDIO SETUP
AUDIO DRC (Dynamic Range Control): Set
according the surrounding environment. Set
to "TV MODE" when the smallest sounds are
indiscernible, or set to "WIDE RANGE" when
the listening environment is good, for
example, in a home movie theater.
DOWNMIX: Switches the method for
mixing down to 2 channels when you play a
MEDIA
DVD which has rear sound elements
(channels), or is recorded in Dolby Digital
format. Normally select "DOLBY SURROUND."
DIGITAL OUT: Selects if audio signals are
output via the DIGITAL OUT (COAXIAL)/HDMI
OUT jack. When you select "ON," set also the
following "DOLBY DIGITAL," "DTS," or
"48kHz/96kHz PCM."
DOLBY DIGITAL: Selects the type of Dolby
Digital signal. Set to "D-PCM" when the
player is connected to an audio component
without a built-in Dolby Digital decoder.
DTS: Selects the type of DTS audio signal. Set
to "ON" when you play a DVD VIDEO with
LANGUAGE SETUP
DTS sound tracks. Do not set to "ON" when
you connect the player to an audio
component without a DTS decoder.
48kHz/96kHz PCM: Selects the sampling
frequency of the digital audio output signal
for a DVD VIDEO.
HDMI SETUP
HDMI RESOLUTION: Selects the type of
video signal output from the HDMI OUT jack.
If "AUTO (1920×1080p)" is selected, the player
outputs video signals of the highest
resolution acceptable for your TV. If the
picture does not appear normally or goes
blank, reset the setting. See
"Troubleshooting" (There is no picture/
picture noise appears). You cannot select this
SCREEN SETUP
when "JPEG RESOLUTION" is set to "PhotoTV
HD."
JPEG RESOLUTION: Selects the type of JPEG
resolution so that you can enjoy a high
picture quality via HDMI connection. This
setting is effective only when you set "TV
16:9
TYPE" to "16:9." You cannot select this when
"HDMI RESOLUTION" is set to "720×480p."
"(1920×1080i) HD
" and "(1920×1080i) HD"
are effective only when you set "HDMI
RESOLUTION" to "1920×1080i." If you have a
4:3 LETTER BOX
Sony TV that is compatible with "PhotoTV
HD" and set this setting to "PhotoTV HD," you
can enjoy the best quality images. If you set
this setting to "PhotoTV HD," "(1920×1080i)
HD
" or "(1920×1080i) HD," the effect,
4:3 PAN SCAN
rotation, and zoom functions are not
available.
YC
C
/RGB (HDMI): Selects the type of HDMI
B
R
signal output from the HDMI OUT jack.
Set to "RGB" if the playback picture is
distorted. You cannot select this when "JPEG
RESOLUTION" is set to "PhotoTV HD."
AUDIO (HDMI): Selects the type of audio
signal output from the HDMI OUT jack. Set to
"PCM" if you connect the player to a TV that
is not compatible with DOLBY DIGITAL/DTS
signals.
This function affects the output from the
ˎ
following jacks:
ˋ LINE OUT L/R (AUDIO) jacks.
ˎ
ˋ DIGITAL OUT (COAXIAL)/HDMI OUT jack only
ˎ
when "DOLBY DIGITAL" is set to "D-PCM."
Specifications
System
Laser: Semiconductor laser
Inputs/Outputs
CUSTOM SETUP
ˎ LINE OUT L/R (AUDIO): Phono jack
ˎ
ˎ DIGITAL OUT (COAXIAL): Phono jack
ˎ
ˎ LINE OUT (VIDEO): Phono jack
ˎ
ˎ HDMI OUT: HDMI 19 pin-Standard
ˎ
Connector
General
ˎ Power requirements: 120 V AC, 60 Hz
ˎ
ˎ Power consumption: 6 W
ˎ
ˎ Dimensions (approx.): 270 × 38.5 ×
ˎ
209 mm (10
/
× 1
/
× 8
/
in.) (width/
5
1
1
8
2
4
height/depth) incl. projecting parts
ˎ Mass (approx.): 950 g (2 lb 2 oz)
ˎ
ˎ Operating temperature: 5 °C to 35 °C (41 °F
ˎ
to 95 °F)
ˎ Operating humidity: 25% to 80%
ˎ
Supplied accessories
ˎ Audio/Video cord (1)
ˎ
ˎ Remote commander (remote) (1)
ˎ
ˎ Size AA (R6) batteries (2)
ˎ
Specifications and design are subject to
change without notice.
Playable file format
Video: MPEG-1 (Cyber-shot data)
Photo: JPEG (DCF format)
Music: MP3 (except for mp3PRO)/WMA
(except for WMA Pro)/AAC/LPCM
Supported extensions: ".mpg", ".mpeg", ".jpg",
".mp3", ".wma", ".wav"
Supported discs: DVD, DVD+RW/+R/+R DL
(+VR mode), DVD-RW/-R/-R DL (VR mode/
video mode), Music CD/Super VCD, CD-R/
-RW
ˎ DATA CDs recorded according to ISO 9660
ˎ
/ on
5
Level 1/Level 2, or its extended format,
Joliet.
ˎ DATA DVDs recorded according to UDF.
ˎ
ˎ The player will play any file in the above,
There is no sound.
ˎ
even if the file format differs. Playing such
Re-connect the connecting cord securely.
ˎ
data may generate noise that can result in
The connecting cord is damaged.
ˎ
speaker damage.
The player is in pause mode or in Slow-
ˎ
ˎ To play a complex hierarchy of folders may
ˎ
motion Play mode.
take some time. Create albums with no
The player is in fast forward or fast reverse
ˎ
more than two hierarchies.
mode.
ˎ The player does not play coded files such
ˎ
as DRM or Lossless compression.
The remote does not function.
ˎ Some video, photo, and music files may
ˎ
The batteries in the remote are weak.
ˎ
not play, depending on the encoding/
The remote is not pointed at the remote
ˎ
recording condition.
sensor
on the player.
ˎ The player will recognize a maximum of
ˎ
When you operate the player by pressing
ˎ
200 albums and 600 files. It can recognize
buttons on the remote in sequence, press
up to 300 music files and 300 photo files
the buttons within 5 seconds of each
when "PHOTO (MUSIC)" is selected.
other.
ˎ The player cannot play a video file of size
ˎ
more than 720 (width) × 576 (height)/2 GB.
The disc does not play.
ˎ The player may not play back the high bit
ˎ
The disc is turned over. Insert the disc with
ˎ
rate video file on the DATA CD smoothly.
the playback side facing down.
You are recommended to play back using
The disc is skewed.
ˎ
DATA DVD.
The disc is dirty or flawed.
ˎ
The player cannot play certain discs.
ˎ
Note about recordable media
The region code on the DVD does not
ˎ
Some recordable media cannot be played on
match the player.
this player due to the recording quality or
Moisture has condensed inside the player.
ˎ
physical condition of the disc, or the
The player cannot play a recorded disc
ˎ
characteristics of the recording device and
that is not correctly finalized.
authoring software. The disc will not play if it
has not been correctly finalized. Also some
The player does not operate properly.
DATA discs created in Packet Write format
When static electricity, etc., causes the
ˎ
cannot be played.
player to operate abnormally, unplug the
player.
Note about copy protection
Images in DVD-VR mode with CPRM
"C:13:" appears on the screen.
protection may not be played.
Clean the disc with a cleaning cloth or
ˎ
check its format.
Note on DVDs and VIDEO CDs
Some playback operations of DVDs and
There is no picture/sound when connected
VIDEO CDs may be intentionally set by
to the HDMI OUT jack.
software producers. Since this player plays
Change the "HDMI RESOLUTION" setting in
ˎ
DVDs and VIDEO CDs according to the disc
"HDMI SETUP." The problem may be
contents the software producers designed,
solved.
some playback features may not be
The equipment connected to the HDMI
ˎ
available. Also, refer to the operating
OUT jack does not conform to the audio
instructions supplied with the DVDs or VIDEO
signal format, in this case set "AUDIO
CDs.
(HDMI)" in "HDMI SETUP" to "PCM."
Try the following: Turn the player off and
ˎ
Note on discs
on again. Turn the connected
This unit is designed to play back discs that
equipment off and on again. Disconnect
conform to the Compact Disc (CD) standard.
and then connect the HDMI cord again.
DualDiscs and some music discs encoded
with copyright protection technologies do
not conform to the Compact Disc (CD)
LANGUAGE CODE LIST
standard. Therefore, these discs may not be
compatible with this unit.
1027
Afar
1345
Note about the discs
1028
Abkhazian
1347
1032
Afrikaans
1349
Do not use the following discs:
1039
Amharic
1350
ˋ A disc recorded in a color system other
ˎ
1044
Arabic
1352
than NTSC, such as PAL (this player
1045
Assamese
1353
conforms to the NTSC color system).
1051
Aymara
1356
ˋ A disc that has a non-standard shape (e.g.,
ˎ
1052
Azerbaijani
1357
card, heart).
1053
Bashkir
1358
ˋ A disc with a label or sticker on it.
ˎ
1057
Byelorussian
1363
1059
Bulgarian
1365
1060
Bihari
1369
The player automatically returns to
1061
Bislama
1376
1066
Bengali; Bangla
1379
standby mode
1067
Tibetan
1393
1070
Breton
1403
If any button on the player or remote is not
1079
Catalan
1408
pressed for more than 25 minutes, the player
1093
Corsican
1417
automatically returns to standby mode.
1097
Czech
1428
1103
Welsh
1435
Playing VIDEO CDs with PBC
1105
Danish
1436
1109
German
1463
functions
1130
Bhutani
1481
1142
Greek
When you start playing a VIDEO CD with PBC
1144
English
1482
(Playback control) functions, the menu for
1145
Esperanto
1483
your selection appears.
1149
Spanish
1489
To play without using PBC, press /
1150
Estonian
1491
or the number buttons while the player is
1151
Basque
1495
stopped to select a track, then press or
1157
Persian
1498
ENTER. To return to PBC playback, press
1165
Finnish
1501
twice, then press .
1166
Fiji
1502
1171
Faroese
1503
1174
French
1505
Controlling TVs with the remote
1181
Frisian
1506
1183
Irish
1507
While holding down TV /, press the
1186
Scots Gaelic
1508
number buttons to select your TV's
1194
Galician
1509
manufacturer's code.
1196
Guarani
1511
1203
Gujarati
1512
Sony 01
Panasonic 19
1209
Hausa
1513
Goldstar 04
Philips 21
1217
Hindi
1514
Hitachi 02
Pioneer 16
1226
Croatian
1515
LG 04
RCA 10
1229
Hungarian
1516
MGA 13
Samsung 20
1233
Armenian
1517
Mitsubishi 13
Sharp 18
1235
Interlingua
1521
NEC 04
Toshiba 07
1239
Interlingue
1525
1245
Inupiak
1527
1248
Indonesian
1528
1253
Icelandic
1529
Troubleshooting
1254
Italian
1531
1257
Hebrew
1532
If you experience any of the following
1261
Japanese
1534
difficulties while using the player, use this
1269
Yiddish
1535
troubleshooting guide to help remedy the
1283
Javanese
1538
problem before requesting repairs. Should
1287
Georgian
1539
any problem persist, consult your nearest
1297
Kazakh
1540
1298
Greenlandic
1543
Sony dealer.
1299
Cambodian
1557
1300
Kannada
1564
The power is not turned on.
1301
Korean
1572
Check that the power cord is connected
ˎ
1305
Kashmiri
1581
securely.
1307
Kurdish
1587
1311
Kirghiz
1613
There is no picture/picture noise appears.
1313
Latin
1632
Re-connect the connecting cord securely.
ˎ
1326
Lingala
1665
1327
Laothian
1684
The connecting cords are damaged.
ˎ
1332
Lithuanian
1697
Check the connection to your TV and
ˎ
1334
Latvian; Lettish
1703
switch the input selector on your TV so
that the signal from the player appears on
ISO 639: 1988 (E/F) standard
the TV screen.
Reset the "HDMI RESOLUTION" setting.
ˎ
Press / to turn off the player, and enter
"369" using the number buttons on the
remote, then press / to turn on the
player again.
PARENTAL CONTROL AREA
CODE LIST
2044 Argentina
2304 Korea
2047
Australia
2363
Malaysia
2046 Austria
2362
Mexico
2057
Belgium
2376
Netherlands
2070
Brazil
2390 New Zealand
2079
Canada
2379
Norway
2090 Chile
2427
Pakistan
2092 China
2424
Philippines
2115
Denmark
2436
Portugal
2165
Finland
2489 Russia
2174
France
2501
Singapore
2109
Germany
2149
Spain
2248 India
2499 Sweden
2238
Indonesia
2086 Switzerland
2254
Italy
2528
Thailand
2276
Japan
2184
United Kingdom
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan)Oromo
Oriya
Punjabi
Polish
Pashto; Pushto
Portuguese
Quechua
Rhaeto-
Romance
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Chinese
Zulu
Not specified