Page 1
Aire Acondicionado Portátil Manual Del Propietario Lea y guarde estas instrucciones antes de usar la unidad Model / Modèle / Modelo: MM Series / Série / Serie Customer Support: Assistance Au Client: Servicio de atencion a clientes: USA/ EE.UU: 1-800-474-2147 CANADA/ CANADÁ^ : 1-888-209-0999...
Page 2
SAFETY READ AND SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. IN CASE THERE IS ANY INCONSISTENCY OR CONFLICT BETWEEN THE ENGLISH VERSION AND ANY OTHER LANGUAGE VERSION OF THE CONTENT OF THIS MATERIAL, THE ENGLISH VERSION SHALL PREVAIL.
Page 3
SAFETY (CONTINUED) • This appliance has been manufactured for use in domestic environments and should not be used for other purposes. • Only use the installation kit provided to install this unit. DO NOT attempt to extend the exhaust hose or install this unit using other methods other than that shown in this manual.
Page 4
THANK YOU Congratulations on your purchase of this Honeywell Portable Air Conditioner. Regarding the information pertaining to the installation, handling, servicing, cleaning and disposal of the appliance, please refer to the below paragraph of the manual. USER TIPS Portable Air Conditioners are ideal for spot cooling. The compressor, condenser and evaporator are housed in a compact unit.
INSTALLATION It is important that the installation instructions below are followed for successful installation of this Portable Air Conditioner. Please call Customer Support if you have any difficulties or queries regarding these installation procedures. Installation Kit: 1. Window Bracket Kit (1 Set) 4.
Page 7
INSTALLATION (CONTINUED) Note: After setting the window bracket to the size of your window, please remove it from the window and follow the instructions below. 3. Connect the exhaust hose to the rear exhaust outlet on the back of the unit. Push-in until it is locked in place.
Page 8
INSTALLATION (CONTINUED) Important: Do not replace or lengthen the exhaust hose as this could cause the unit to malfunction. 50 cm / 20" NOT RECOMMENDED RECOMMENDED WARNING: Any warranties included with this product will be voided if an extra extension hose is added to the originally provided installation kit or if the installation is performed differently than the manufacturer's instructions, without proper consultation.
USE & OPERATION CONTROL PANEL (5) & (6) STOP 1) Timer Control 4) Mode Control 2) Fan Speed Control 5) Power Control / Standby Mode 3) Timer / Temperature Set Controls 6) Warning Light (when flashing) FUNCTION BUTTONS POWER CONTROL The Power Control turns the unit on and off.
Page 10
USE & OPERATION (CONTINUED) FUNCTION BUTTONS (CONTINUED) When heating mode* is selected the indicator light will shine. Heating is activated only when the ambient temperature is below 25°C (77°F). In this mode, the desired temperature can be set between 16°C- 25°C (61°F- 77°F). Note: The exhaust hoses must vent outside the room when using heating mode.
Page 11
USE & OPERATION (CONTINUED) REMOTE CONTROL The functions work the same as the Portable Air Conditioner's Control Panel. All key functions can be accessed from the remote control. Power Control ON / OFF Temperature / Timer Set • Used for adjusting the timer and temperature.
CLEANING & MAINTENANCE Appliance Maintenance: Turn off the appliance before disconnecting the power supply. Only clean the appliance with a soft dry cloth. Dust Filter Maintenance: The dust filter is to be cleaned every two weeks to maintain air cooling efficiency. Please follow the below instructions for cleaning the dust filters: Switch off and unplug the air conditioner from the electrical outlet.
WATER CONDENSATION DRAINAGE When there is excess water condensation inside the unit, the air conditioner stops running and shows a warning light (the Power Control button flashes with a red light). This warning light indicates that the water condensation needs to be drained using the following procedures: Manual Draining in Cooling, Dehumidifying and Heating* Modes Water may need to be drained in high humidity areas.
TROUBLESHOOTING GUIDE The following troubleshooting guide addresses the most common problems. If problems persist, call customer support. Unplug and disconnect the appliance from the power source before attempting to troubleshoot. PROBLEM POSSIBLE CAUSE SOLUTION No electricity. Check for power. Batteries in the remote control need to be Change remote control batteries.
Page 15
TROUBLESHOOTING GUIDE (CONTINUED) PROBLEM POSSIBLE CAUSE SOLUTION A door or window is open. Make sure the window or door is closed. The dust filter is dirty. Clean the dust filter. The exhaust hose is Reinstall exhaust hose properly detached. (refer to Installation section). Runs but not Temperature setting is Reduce temperature setting on control panel.
Page 16
TROUBLESHOOTING GUIDE (CONTINUED) PROBLEM POSSIBLE CAUSE SOLUTION Heating* function not Check that the Heating* function has been activated. Heater* is not activated yet. will be illuminated when the switching ON The ambient temperature Heater* is switched ON. (This applies to is too high.
ERROR CODE GUIDE ERROR CODE ERROR POSSIBLE CAUSE "E1" Indoor temperature sensor failure (open circuit or short circuit). "E3" Evaporator temperature sensor failure (open circuit or short circuit). "P1" Water Full alarm.