Page 1 Service Division 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 www.samsungusa.com CANADA Samsung Electronics Canada Inc. Samsung Customer Care 7037 Financial Drive Mississauga, Ontario L5N 6R3 www.samsung.ca BN68-00665D-02 Owner’s Instructions LT-P468W This device is a Class B digital apparatus.
Page 2 Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. If the borders at the left, right and the center of the screen remain fixed for Caution an extended period of time, the...
Page 3 If the borders at the left, right and the center of the screen remain fixed for Caution an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.
Page 4: Features
Variable Screen Size: 4 : 3 for TV programs and Widescreen for movies √ See page 68 My Color Control Users can set colors to their preference by adjusting blue, green and pink tones. √ See page 62 Dynamic Contrast Automatically detects the input video signal and adjusts to create optimum contrast √...
Page 5: Before Reading This Manual
2. Refer to Troubleshooting if problems arise. 3. Refer to the Index to quickly search for information. 4. Refer to the Glossary for term definitions. 5. Refer to the Screen Menu for an easy understanding of the menu structure. Copyright  2004 Samsung Electronics Co. Ltd Samsung Electronics Co.
Page 6: Table Of Contents
Connecting a DVD Player... 30 Connecting a Digital Set-Top Box (STB)... 32 Connecting a Camcorder/Gaming Device... 33 Connecting an Amplifier/Home Theater (Variable Audio Output) ... 34 Connecting a HDMI Corresponding Device... 35 Connecting to a Digital Audio System ... 36 Connecting a Sub Woofer Speaker...
Page 7 How to Set up Restrictions Using the “MPAA Rating”... 95 Important Notes About Parental Locks ... 96 How to Set up Restrictions Using the Canadian English... 97 How to Set up Restrictions Using the Canadian French ... 98 Connecting to a PC Checklist Before Connecting to a PC... 100 PC Software Setup ...
Page 9: Getting Started
Getting started Your TV and Accessories ... 8 Wall Installation Instructions ... 16 Using the Anti-Theft Lock... 21...
Page 10: Your Tv And Accessories
TIMER mode is set to the “On” position with the remote control after setting the clock and the On or Off timer. Even if the power is turned off, this indicator stays lit. (Clock must be set before using this function.) ´...
Page 11: Rear Panel Jacks
Rear Panel Jacks OPTICAL DIGITAL AUDIO OUTPUT HDMI INPUT DVI INPUT DVI AUDIO INPUT PC AUDIO INPUT PC INPUT COMPONENT1 VIDEO INPUT COMPONENT2 VIDEO INPUT COMPONENT1 AUDIO INPUT COMPONENT2 AUDIO INPUT S-VIDEO INPUT1 SUBWOOFER OUTPUT VIDEO INPUT1 VIDEO OUTPUT ANTENNA INPUT...
Page 12: Remote Control
PRE-CH Press to return to the previous viewing channel. √ See pages 28~35 SOURCE Press to select or check the status of the TV, AV1, AV2, S-Video1, S-Video2, Component1, Component2, HDMI, DVI or PC. √ See pages 43~45 Channel Buttons Press to change channels.
Page 13 Press to automatically store selected channels. √ See page 55 DNIe Press to improve picture quality. – Press to check the status of the PC connection or select PC mode. — VIDEO/DVD Buttons ÷ √ See page 13 Press to set to VIDEO, Cable TV or DVD.
Page 14: Using Your Remote Control
Remote Control Operation Angle The remote control operation angle lies within a 30˚ angle to the right or left of the TV and up to a distance of about 23 feet from the TV. • Properly dispose of the expired batteries. Contact...
Page 15: Setting Up Your Remote Control
Setting Up Your Remote Control This TV's remote control can operate almost any VCR, cable box or DVD. It can also operate Samsung set-top boxes. After it has been set up properly, your remote control can operate in five different modes: TV, VCR, CATV, DVD or STB.
Page 16: Programming The Remote Control For Other Components
Your TV and Accessories Programming the Remote Control for Other Components VCR Remote Control Codes...
Page 17 Cable Box (CATV) Remote Control Codes DVD Remote Control Codes...
Page 18: Wall Installation Instructions
Any place vulnerable to vibration or impact: The product may come off and break. • Near smoke and fire detectors: The sprinkler may be activated upon detecting heat from the product. • Near high voltage: The reception for your product may be interrupted.
Page 19: Attaching Your Tv To The Wall Attachment Panel Bracket
Attaching Your TV to the Wall Attachment Panel Bracket How to Attach the TV to the Bracket (sold separately) 1. Remove the 6 screws from the back of the TV. 2. Separate the stand from the monitor. Remove 6 screws...
Page 20 Attaching Your TV to the Wall Attachment Panel Bracket 3. Assemble the plastic screw anchors and the screws. (See the picture below.) 4. Tighten the screw assemblies (as shown in Picture 3) to the back of the TV. 6 Screw Assemblies...
Page 21 Œ ´ 5. Put the four holders on the back of the TV into the holes on the wall bracket , lower the TV , and hang the ˇ TV on the bracket. Fasten the TV securely to the wall bracket with stick screws as shown in so that the two will not separate.
Page 22: Adjusting The Angle Of The Bracket
0-15˚. (±2˚) 1. Contact an authorized technician when installing the wall attachment panel. 2. After hanging the TV on the wall bracket, check from both sides to see if the plastic screw anchors are securely in place. Caution 3. Be careful not to get your fingers caught during installation or while adjusting the angle of the bracket.
Page 23: Using The Anti-Theft Lock
Separately Figure 2 Figure 1 1. Insert the locking device into the Kensington slot on the LCD TV (Fig. 1), and turn it in the locking direction (Fig. 2). 2. Connect the Kensington lock cable. 3. Secure the Kensington lock to a desk or a heavy stationary object.
Page 25 Connecting Cable TV... 26 Connecting a VCR ... 28 Connecting & Viewing Satellite TV... 29 Connecting a DVD Player... 30 Connecting a Digital Set-Top Box (STB) ... 32 Connecting a Camcorder/Gaming Device ... 33 Connecting an Amplifier/Home Theater (Variable Audio Output) ... 34 Connecting a HDMI Corresponding Device ...
Page 26: Checklist Before Installation
3. Make sure that the right (red) and left (white) audio jacks are correctly connected. 4. Check the type of jacks on the back of the product you wish to connect to your TV. Please refer to the table below for the connection order of products you own.
Page 27: Connecting Vhf And Uhf Antennas
Antennas with 300-ohm Flat Twin Leads If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300-ohm twin flat leads, follow the directions below. Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied).
Page 28: Connecting Cable Tv
Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).
Page 29: Connecting To A Cable Box That Descrambles Some Channels
After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
Page 30: Connecting A Vcr
• If <AV1> or <AV2> is unavailable, please check that the video cable is connected correctly. Turn on your VCR, then press the [PLAY] button. • If you have connected the TV and the VCR using an S-Video cable, press the [SOURCE] button to select <S-Video1> or <S-Video2>. Note •...
Page 31: Connecting & Viewing Satellite Tv
For connection of the audio cables please follow the instructions above. • If you have connected the TV and the VCR using the S-Video cable, press the [SOURCE] button to select <S-Video1> or <S-Video2>. • If you have connected the video cable to the [AV2] terminal, select <AV2>.
Page 32: Connecting A Dvd Player
Turn on the DVD player and press the [PLAY] button. • If you have connected the video cable to the [Component2] terminal instead of [Component1], press the [SOURCE] button to select <Component2>. Note • Component and audio cables are sold separately.
Page 33 Rear Panel of LCD TV Connect the video cable between the [Video 1 In (yellow)] terminal on the back of the TV or the [Video2 In (yellow)] terminal on the side of the TV and the [Video Out (yellow)] terminal on the back of the DVD.
Page 34: Connecting A Digital Set-Top Box (Stb)
[Component1] terminals, press the [SOURCE] button to select Note <Component2>. • If you have connected using a DVI-D cable, press the [SOURCE] button to select <DVI>. In this case connect the audio cable to the [Left-Audio-Right] terminals below the DVI terminal.
Page 35: Connecting A Camcorder/Gaming Device
Connecting to the [AV2 IN] terminal on the side of the TV will make it easy to use the camcorder or a gaming device. • If you have connected the video cable to the [AV1] or [AV2] terminal, press the [SOURCE] button to select [AV1] or [AV2].
Page 36: Connecting An Amplifier/Home Theater (Variable Audio Output)
(or AV Amp) please refer to the instructions provided Note by the Amplifier/Home Theater manufacturer. • In order to enjoy the sound from the Home Theater (or AV Amp), press the [MUTE] button on the TV remote control, or press the [Volume] button to minimize the volume or to cut off the sound from the •...
Page 37: Connecting A Hdmi Corresponding Device
Connecting an HDMI Corresponding Device HDMI Corresponding Device Output Terminal Connect the HDMI cable between the [HDMI IN] on the back of the TV and the [HDMI OUT] of the DVD player (or the HDMI Corresponding Device). Viewing a HDMI Device Turn your TV on, then press the [SOURCE] button to select <HDMI>.
Page 38: Connecting To A Digital Audio System
Connecting to a Digital Audio System There are many types of audio systems on the market today. A simplified illustration of an audio system is shown below. For more information, see your audio system owner’s manual. Connect the Optical cable between the [Optical...
Page 39: Source List Setup
Source List Setup Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set- Top box and the TV source (broadcast or cable). MENU ENTER 2,3,4 …/† Press the [MENU] button. The menu will be displayed Press the [ENTER] button to select <Input>.
Page 40: Editing Input Source Names
Press the […/†] buttons to move to <Edit Name>, then press the [ENTER] button. The <Edit Name> screen will be displayed. Press the […/†] buttons to move to the source list to edit, then press the [ENTER] button. Press the […/†] buttons to move to the device of your choice, then press the [ENTER] button.
Page 41: Setting The Initialization
Setting the Initialization Plug & Play Feature ... 40 Setting Channels ... 41 Customizing the Picture ... 46 Choosing a Menu Language... 48 Viewing Closed Captions ... 49...
Page 42: Plug & Play Feature
Plug & Play Feature When the TV is initially powered On, four basic customer settings proceed automatically and subsequently: Setting the language, Video signal source, Auto program and Clock. POWER ENTER 2,3,4 MENU …/†/œ/√ 2,3,5 Press the [POWER] button to turn on the TV.
Page 43: Setting Channels
Setting Channels Selecting the Video Signal-Source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system). MENU ENTER 2,3,4 …/†...
Page 44: Storing Channels Automatically
Setting Channels Storing Channels Automatically The AUTO PROGRAM feature automatically stores all of the available Air/CATV channels in the memory. MENU …/† ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] button to move to <Channel>, then press the [ENTER] button.
Page 45 To Stop the Auto Program Function Press the [MENU] button while the function is being executed. Also you can press the [ENTER] button to stop the setup. Checking which Channels are Stored in Memory Press the [Channel] button. Only the channels stored in memory will be selected (in order).
Page 46: Adding Channels
The <Add/Delete> menu will be displayed. Press the [Channel] button to select a channel to store, then press the [ENTER] button. The channel status will be changed from <Not in Memory> to <In Memory>. Repeat Steps 3 and 4 for each channel to be stored.
Page 47: Erasing Channels
The <Add/Delete> menu will be displayed. Press the [Channel] button to select a channel to erase, then press the [ENTER] button. The channel status will be changed from <Not in Memory> to <In Memory>. Repeat Steps 3 and 4 for each channel to be deleted.
Page 48: Customizing The Picture
Customizing the Picture Fine Tuning the Channels If you experience intermittent lines, blurry colors or unstable picture quality, you can fine tune the channel for optimal picture quality. MENU …/†/œ/√ 2,3,4 ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed.
Page 49: Setting The Lna (Low Noise Amplifier)
Customizing the Picture Setting the LNA (Low Noise Amplifier) If picture noise occurs on a particular channel, the LNA function can be used to improve reception. MENU …/† 2,3,4 ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed.
Page 50: Choosing A Menu Language
Choosing a Menu Language Your can select a MENU language. English, Français, Español or Português is available for the MENU language. MENU …/† 2,3,4 ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Setup>, then press the [ENTER] button.
Page 51: Viewing Closed Captions
Viewing Closed Captions Your TV decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreign-language translations. All VCRs record the closed caption signal from television programs, so home-recorded video tapes also provide closed captions. Most pre-recorded commercial video tapes provide closed captions as well.
Page 52 6,7,8,9 EXIT Press the […/†] buttons to select <Channel>, then press the [ENTER] button. Press the […/†] buttons to select <1> or <2>, then press the [ENTER] button. Press the […/†] buttons to select <Field>, then press the [ENTER] button.
Page 53: Setting The Picture
Picture-in-Picture Function ... 56 Setting the My Color Control ... 62 Dynamic Contrast Settings ... 65 Brightness Sensor Settings... 66 Setting the Color Weakness Enhancement Mode ... 67 Changing the Screen Size ... 68 Film Mode Setup ... 70 Digital Noise Reduction... 71 Blue Screen Mode Setup ...
Page 54: Selecting A Picture Mode
Selecting a Picture Mode Your can change the picture settings to <Dynamic>, <Standard>, <Movie> or <Custom> to suit the circumstances. MENU …/† ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Picture>, then press the [ENTER] button.
Page 55: Customizing The Picture Settings
Adjusts the lightness and darkness between objects and the background. Brightness Adjusts the brightness of the whole screen. Sharpness Adjusts the outline of objects to either sharpen it or make it more dull. Color Adjusts the colors making them lighter or darker.
Page 56: Adjusting The Background Color
Press the […/†] button to move to <Color Tone>, then press the [ENTER] button. The <Color Tone> menu will be displayed. Press the […/†] buttons to move to a tone, then press the [ENTER] button. Keep pressing the […/†] button to cycle through the tones in the order of <Cool2>, <Cool1>, <Normal>, <Warm1>, and <Warm2>.
Page 57: Setting The Dnie
Setting the DNIe The DNIe (Digital Natural Image engine) function is unique to Samsung bringing you brighter, sharper and finer picture images. MENU …/† 2,3,4 ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Picture>, then press the [ENTER] button.
Page 58: Picture-In-Picture Function
Picture-in-Picture Function Picture-in-Picture Function You can use the PIP function to simultaneously watch two video sources. MENU …/† 2,3,4 ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Picture>, then press the [ENTER] button.
Page 59: Changing The Contents Of The Pip Image
Picture-in-Picture Function Changing the Contents of the PIP Image You can alternate between the external input devices connected to your TV in the PIP window. MENU …/† 2,3,4,5 ENTER 2,3,4,5 EXIT Press the [MENU] button. The menu will be displayed.
Page 60: Swapping The Main Image And Pip Image
Picture-in-Picture Function Swapping the Main Image and PIP Image You can swap the image in the PIP window and the image on the main screen. MENU …/† 2,3,4 ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed.
Page 61: Changing The Size Of The Pip Window
Press the […/†] buttons to move to <Size>, then press the [ENTER] button to display the <Size> selections. Press the […/†] buttons to move to a size of your choice, then press the [ENTER] button. The size of the PIP window will be changed.
Page 62: Changing The Position Of The Pip Window
Picture-in-Picture Function Changing the Position of the PIP window You can alternate the position of the PIP window between the four corners of the screen. MENU …/† 2,3,4,5 ENTER 2,3,4,5 EXIT Press the [MENU] button. The menu will be displayed.
Page 63: Changing The Pip Channel
Press the […/†] buttons to move to <Picture>, then press the [ENTER] button. The <Picture> menu will be displayed. Press the […/†] buttons to move to <PIP>, then press the [ENTER] button. The <PIP> menu will be displayed. Select PIP On. √ See page 56 Press the […/†] buttons to move to <Channel>, then...
Page 64: Setting The My Color Control
Setting the My Color Control My Color Control Blue, Green and Pink tones are easily adjustable to suit your preferences. MENU …/†/œ/√ 2,3,4,5 ENTER 2,3,4,5,6 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Picture>, then press the [ENTER] button.
Page 65 My Color Control Mode Characteristics Using My Color Control mode, you can enjoy the vivid colors shown below. Standard Picture Emphasizing Mild Greens Above illustrations are provided for instruction. Actual adjustment screen may differ from illustrations shown above. Emphasizing Clear Blues...
Page 66: My Color Control Custom Settings
2,3,4,5 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Picture>, then press the [ENTER] button. The <Picture> menu will be displayed. Press the […/†] buttons to move to <My Color Control>, then press the [ENTER] button.
Page 67: Dynamic Contrast Settings
Press the […/†] buttons to move to <Dynamic Contrast>, then press the [ENTER] button. The <Dynamic Contrast> menu will be displayed. Press the […/†] buttons to move to <On>, then press the [ENTER] button. The <Dynamic Contrast> is to set <On>.
Page 68: Brightness Sensor Settings
Press the […/†] buttons to move to <Brightness Sensor>, then press the [ENTER] button to select <Brightness Sensor>. Press the [œ/√] buttons to move to <On>, then press the [ENTER] button to set the Brightness Sensor function. Alternatively select <Off> to deselect the Brightness Sensor function.
Page 69: Setting The Color Weakness Enhancement Mode
Setting the Color Weakness Enhancement Mode This option adjusts the Red, Blue or Green color to enhance the image according to the user’s particular color weakness. MENU …/†/œ/√ 2,3,4,5 ENTER 2,3,4,5 EXIT Press the [MENU] button. The menu will be displayed.
Page 70: Changing The Screen Size
Changing the Screen Size You can change the size of the screen according to the image. MENU …/† ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Picture>, then press the [ENTER] button.
Page 71 Wide Sets the picture to 16:9 Wide Mode suitable for DVD or Wide pictures. Panorama Use this mode to change from 16:9 to 4:3 mode. Zoom1 Magnifies the 16:9 mode to fill the full screen. Press the […/†] button to move the picture up or down.
Page 72: Film Mode Setup
Film Mode Setup Use Film Mode for the best picture quality when viewing a film. MENU …/† 2,3,4 ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Picture>, then press the [ENTER] button.
Page 73: Digital Noise Reduction
Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. MENU …/† 2,3,4 ENTER 2,3,4 EXIT Press the [MENU] button.
Page 74: Blue Screen Mode Setup
Blue Screen Mode Setup If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture. To view channels with weak signals, it may be necessary to turn the Blue Screen mode Off.
Page 75: Freezing The Picture
Freezing the Picture Press the [STILL] button. Each press of the [STILL] button toggles between On and Off. Still Normal sound will still be heard when the picture is frozen. Note...
Page 77: Setting The Sound
Adjusting the Equalizer ... 77 Setting Multi-Channel Sound (MTS) ... 78 Automatic Volume Control ... 79 SRS TruSurround XT Setup ... 80 Setting the Sub Woofer Output... 81 Selecting the Sub(PIP) Window Sound ... 82 Setting up the Melody Sound ... 83...
Page 78: Selecting The Sound Mode
Selecting the Sound Mode You can select a sound setting among <Music>, <Movie> or <Speech>. MENU …/† 2,3,4 ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Sound>, then press the [ENTER] button.
Page 79: Adjusting The Equalizer
Press the […/†] buttons to move to <Equalizer>, then press the [ENTER] button to display the <Equalizer> adjustments. Press the [œ/√] buttons to move to the item of your choice, then press the […/†] buttons to adjust. Press the [EXIT] button to finish.
Page 80: Setting Multi-Channel Sound (Mts)
Setting Multi-Channel Sound (MTS) Depending on the particular program being broadcast, you can listen to stereo, mono, or a Secondary Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP has unrelated information like news or weather.) MENU …/†...
Page 81: Automatic Volume Control
“Auto volume” lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Page 82: Srs Trusurround Xt Setup
SRS TruSurround XT Setup TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. Trusurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.
Page 83: Setting The Sub Woofer Output
Setting the Sub Woofer Output If your TV is connected to a Sub Woofer, you can select the Sub Woofer output, volume and cut-off frequencies. MENU …/†/œ/√ 2,3,4,5 ENTER 2,3,4,5 EXIT Press the [MENU] button. The menu will be displayed.
Page 84: Selecting The Sub(Pip) Window Sound
Press the […/†] buttons to move to <Sound Select>, then press the [ENTER] button to display the <Sound Select> selections. Press the […/†] buttons to move to <Sub>, then press the [ENTER] button to select a sound for the sub window. Press the [EXIT] button to finish. Sound √...
Page 85: Setting Up The Melody Sound
Setting up the Melody Sound You can select a melody sound to play each time you turn the TV on or off with the remote control. MENU …/† 2,3,4 ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed.
Page 87: Setting The Clock
Setting the Clock Setting the Current Time ... 86 Setting the On/Off Timer... 87 Setting the Sleep Timer... 90...
Page 88: Setting The Current Time
Setting the Current Time Setting the clock enables the use of the various TV timer features. MENU ENTER 2,3,4,5 …/† 3,4,5 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Setup>, then press the [ENTER] button.
Page 89: Setting The On/Off Timer
Setting the On/Off Timer You can set the TV to be automatically turned on or off at a preset time. MENU ENTER 2,3,4 …/† Setting the On/Off Timer Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Setup>, then press the [ENTER] button.
Page 90 1,2,3,4,5,6 EXIT You can set the timer to turn the TV on at 6:30am, to Channel 6 with the Volume set at level 10. Press the […/†] buttons to set it to <6>. The <Hour> setting of the <On Timer> is now set to <6>.
Page 91 …/†/√ 1,2,3,4 EXIT For example: You can set the timer to turn the TV off at 11:30pm Press the […/†] buttons to set it to <11>. The <Hour> setting of the <Off Timer> is now set to <11>. Press the [√] button to move to <Minute>, then press the […/†] buttons to set it to <30>.
Page 92: Setting The Sleep Timer
Setting the Sleep Timer For example: You can set the timer so that the TV will turn off automatically at a preset time. MENU ENTER 2,3,4,5 …/† 3,4,5 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Setup>, then press the [ENTER] button.
Page 93: Using The V-Chip
Using the V-Chip Setting up your Personal ID Number (PIN) ... 92 How to Enable/Disable the V-Chip ... 93 How to Set-Up Restrictions using the “TV Parental Guidelines” ... 94 How to Set up Restrictions Using the “MPAA Rating” ... 95 Important Notes About Parental Locks ...
Page 94: Setting Up Your Personal Id Number (Pin)
Press the […/†] button to move to <Change PIN>, then press the [ENTER] button. The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. The default PIN number for a new TV set is <0-0-0-0>.
Page 95: How To Enable/Disable The V-Chip
The <Setup> will be displayed. Press the […/†] buttons to move to <V-Chip>, then press the [ENTER] button. The message <Enter PIN> will appear. Enter your 4 digit PIN number. The <V-Chip> screen will appear. To enable the V-Chip feature Press the [ENTER] button, then press the […/†] button to...
Page 96: How To Set-Up Restrictions Using The "Tv Parental Guidelines
<TV-G> through <TV-MA>(everybody else). Note • The restrictions for these two groups work independently: If a household includes very young children as well as young adults, the TV parental guidelines must be set up separately for each age group.
Page 97: How To Set Up Restrictions Using The "Mpaa Rating
The Movie rating system uses the “MPAA” (Motion Picture Association of America) system, and its main application is for movies. When the rating control is on, the TV will automatically block any programs that are coded with objectionable ratings (either “MPAA Rating” or “TV Parental Guidelines”).
Page 98: Important Notes About Parental Locks
Note 2>). Suppose that the TV-G rating and all of its contents (V, S, L, and D) are blocked. In that case, more restrictive ratings (TV-PG, TV-14, and TV-MA) and all of their contents (V, S, L, and D) are automatically blocked as well.
Page 99: How To Set Up Restrictions Using The Canadian English
The <Setup> will be displayed. Press the […/†] buttons to move to <V-Chip>, then press the [ENTER] button. The message <Enter PIN> will appear. Enter your 4 digit PIN number. The <V-Chip> screen will appear. Press the […/†] button to move to <Canadian English>, then press the [ENTER] button.
Page 100: How To Set Up Restrictions Using The Canadian French
The <Setup> will be displayed. Press the […/†] buttons to move to <V-Chip>, then press the [ENTER] button. The message <Enter PIN> will appear. Enter your 4 digit PIN number. The <V-Chip> screen will appear. Press the […/†] button to move to <Canadian French>, then press the [ENTER] button.
Page 101: Connecting To A Pc
Connecting to a PC Checklist Before Connecting to a PC...100 PC Software Setup...101 Connecting to a PC ...102 Auto Screen Adjustment ...104 Adjusting the Frequency ...105 Fine Tuning (Vertical Tuning) ...106 Adjusting the Screen Position ...107 Initializing the Screen Settings...108...
Page 102: Checklist Before Connecting To A Pc
Setting the Display Modes to be Compatible with Your TV Mode VESA • The Modes Table conforms to the regulations of IBM/VESA and is prepared based on analog input standards. Note • The Mode for DVI is the same as those for the PC.
Page 103: Pc Software Setup
PC Software Setup The Windows (MS Windows XP) display-settings for a typical computer are shown below. 1. Right click the mouse on the Windows Desktop, then click on [Properties]. The <Display Dialog-Box> will be displayed. 2. Click on [Settings], then set the <Display Mode> with reference to the Display Modes Table.
Page 104: Connecting To A Pc
• You cannot use a DVI-I cable (supports analog signals also). You must use the DVI-D cable (supports digital signals only). • If you connect the PC Audio to the PC In Audio jack on the TV, the sound is heard from the TV speakers.
Page 105 Signal per Pin of the PC Video Jack Plug PC Video Cable (15-Pin Signal Cable) PC In PC In Number Green Green Blue Blue Ground Ground Ground (DDC) Ground (DDC) Red Ground Red Ground Green Ground Green Ground Blue Ground...
Page 106: Auto Screen Adjustment
Auto Screen Adjustment The frequency and positioning of the PC screen can be automatically adjusted. MENU …/† 2,3,4 ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Setup>, then press the [ENTER] button.
Page 107: Adjusting The Frequency
Adjusting the Frequency If vertical patterns appear on the PC screen, adjust the frequency. MENU …/†/œ/√ 2,3,4,5,6 ENTER 2,3,4,5 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Setup>, then press the [ENTER] button.
Page 108: Fine Tuning (Vertical Tuning)
Press the […/†] buttons to move to <Setup>, then press the [ENTER] button. The <Setup> menu will be displayed. Press the […/†] buttons to move to <PC>, then press the [ENTER] button. The <PC> menu will be displayed. Press the […/†] buttons to move to <Image Lock>, then press the [ENTER] button.
Page 109: Adjusting The Screen Position
Adjusting the Screen Position Adjust the PC’s screen positioning if it does not fit the TV screen. MENU …/†/œ/√ 2,3,4,5 ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Setup>, then press the [ENTER] button.
Page 110: Initializing The Screen Settings
Initializing the Screen Settings Use this function to return the screen settings to the default values. MENU …/† 2,3,4 ENTER 2,3,4 EXIT Press the [MENU] button. The menu will be displayed. Press the […/†] buttons to move to <Setup>, then press the [ENTER] button.
Page 111: Troubleshooting
Troubleshooting Troubleshooting ...110...
Page 112: Troubleshooting
Troubleshooting If the TV seems to have a problem, first try finding the solution in this Troubleshooting List. If none of these troubleshooting tips apply, call your nearest Samsung Service Center or 1-800-SAMSUNG. Installation & Connection Problem The TV does not turn on.
Page 113 Sound Problem No sound • Adjust the volume. • Adjust the volume or press the [MUTE] button again to deselect the mute function. Sound too low • Adjust the volume. • Set the Auto Volume Adjustment to <On>.
Page 114 Not all channels are available. Some channels do not show The TFT LCD panel uses a panel consisting of sub pixels (2,073,600) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen.
Page 115: Miscellaneous Information
Miscellaneous Information Storage & Maintenance ...114 Accessories and Items Sold Separately...115 Glossary...116 Screen Menu Structure ...117 Specifications...123 Index ...124...
Page 116: Storage & Maintenance
Maintaining the Exterior of the TV and the Screen Wipe with a dry soft cloth. • Do not use a wet cloth or any flammable substance such as benzene or thinner. They can damage your TV. • Do not touch the screen with fingernails or other sharp objects.
Page 117: Accessories And Items Sold Separately
Video Cable, Audio Cable, S-Video Cable, Component Cable, PC Video Cable, PC Audio Cable, Optical Digital Audio Cable : Purchase at an electronics supply shop or via the Internet, or contact a Samsung Retailer or Service Center. Video Cable Audio Cable...
Page 118: Glossary
This unit must be used with an Active Sub. Video/Audio Jack The Video jack is yellow, and the Audio jacks are white (L) and red(R). Wide Picture Picture is in 16:9 format, wider than the ordinary TV picture in 4:3...
Page 119: Screen Menu Structure
Screen Menu Structure The Screen Menu Structure is shown below. Buttons used for the screen menu control [MENU] button Press this button to open/exit the menu When selecting the input source (TV/Video/S-Video/Component/HDMI) Input √ Source List : TV √ Edit Name √...
Page 120 Screen Menu Structure Picture Mode : Dynamic Custom Color Tone : Warm1 DNIe : DNIe On My Color Control Dynamic Contrast : Off † More Move Enter Picture Color Tone DNIe My Color Control Dynamic Contrast Brightness Sensor Size Film Mode...
Page 121 TV Parental Guidelines TV-Y/TV-Y7/TV-G/TV-PG/TV-14/TV-MA MPAA Rating Change PIN Caption Caption Mode Channel Field Language Blue Screen Color Weakness Color Weakness Green Blue Melody Air/STD/HRC/IRC On/Off Hour/Minute/am/pm Off/30/60/90/120/150/180 Hour/Minute/am/pm/Ch./Vol./Activation Hour/Minute/am/pm/Activation On/Off G/PG/PG-13/R/NC-17/X/NR Enter New PIN/Confirm New PIN On/Off Caption/Text English/Français/Español/Português On/Off On/Off On/Off...
Page 122 Screen Menu Structure When selecting the input source (PC/DVI) Input Source List : TV Edit Name Anynet Move Enter Input Source List Edit Name Anynet Picture Mode : Dynamic Custom Color Tone : Warm1 DNIe : DNIe On My Color Control Dynamic Contrast : Off †...
Page 123 Mode : Dynamic √ Custom √ Color Tone : Warm1 √ DNIe : DNIe On √ √ My Color Control √ Dynamic Contrast : Off † More Move Enter Return Picture Source Swap Size Position Channel Size Sound √ Mode : Standard √...
Page 124 Screen Menu Structure Setup Time Plug & Play V-Chip Caption Language : English Blue Screen : Off Color Weakness : Off † More Move Enter Setup Time Language Blue Screen Melody √ √ √ √ √ √ √ Return Clock Set...
Page 125: Specifications
The product design and specifications can be changed for improvement in performance without prior notice. This device is a Class B digital apparatus which can be used in residential and industrial areas. Class B devices are registered for electromagnetic waves, and suitable for any area as well as home.
Page 126: Index
DVI-D Cable Dynamic Contrast Film Mode Freezing the Picture Frequency Adjustment Gaming Device HDMI Cable Horizontal Frequency Image Reset Low Noise Amplifier (LNA) Main Picture Mono My Color Control Noise Reduction Off Timer On Timer On Timer Volume 30, 32...

Samsung LT-P468W Owner's Instructions Manual

Getting Started

Connection & Input Source Setup

Setting the Initialization

Setting the Picture

Quick Links

Troubleshooting

Related Manuals for Samsung LT-P468W

Summary of Contents for Samsung LT-P468W

Table of Contents