hit counter script
Barco R9010310 Owner's Manual
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector
  5. R9010310
  6. Owner's manual
Barco R9010310 Owner's Manual

Barco R9010310 Owner's Manual

Barco projector owner's manual r9010310
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SLM R9+
Owner's manual
R9010310
R5976801/01
20/10/2004

Advertisement

Table of Contents
loading

Related Manuals for Barco R9010310

Summary of Contents for Barco R9010310

  • Page 1 SLM R9+ Owner’s manual R9010310 R5976801/01 20/10/2004...
  • Page 2 Barco nv Events Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.89.70 Fax: +32 56.36.88.24 E-mail: events@barco.com Visit us at the web: www.barco.com Printed in Belgium...
  • Page 3 Changes Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war- ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time without notice.

  • Page 5: Table Of Contents

    Controlling the projector ........
  • Page 6 Table of contents 7. Random Access Adjustment Mode ................57 Overview Flow.
  • Page 7 Change Projector Address ........
  • Page 8 Table of contents R5976801 SLM R9+ 20/10/2004...

  • Page 9: Safety Instructions

    Before attempting to remove the projector’s cover, you must turn off the projector and disconnect from the wall outlet. When performing set up work at a ceiling mounted projector, to prevent injury caused by falling objects or the system, set out a keep out area.
  • Page 10 1. Safety Instructions Extra Safety manual Read also safety instructions in separate manual (R5976125). R5976801 SLM R9+ 20/10/2004...

  • Page 11: Packaging And Dimensions

    Projector Dimensions 2.1 Projector Packaging Way of Packaging The projector is packed in a carton box. To provide protection during transportation, the projector is surrounded with foam. The package is secured with banding and fastening clips. To unpack 1. Release the fastening clips.

  • Page 12: Lamp Packaging

    Way of packaging As it is not allowed to transport the projector with the lamp mounted inside the projector, this lamp is packed in a separate carton box. Save this carton box , it can be used to repack the lamp when you ever have to transport your projector.
  • Page 13 2. Packaging and Dimensions Side view Dual stack interlocking Air IN Air IN Dual stack interlocking Adjustable feet Image 2-3 Side view dimensions R5976801 SLM R9+ 20/10/2004...
  • Page 14 2. Packaging and Dimensions R5976801 SLM R9+ 20/10/2004...

  • Page 15: Installation Guidelines

    (e.g. after each show). A projector must always be mounted in a manner which ensures the free flow of air (it is advisable to use clean air) into the projectors ventilation inlets. For installations in environments where the projector is subject to airborne contaminants such as that produced by...

  • Page 16: Configuration

    What image size? How big should the image be? The projector is designed for projecting an image size : min 1.00m (3.3ft) to max 15 m (49.2ft) (depending on the ambient light conditions), with an aspect ratio of 4 to 3.

  • Page 17: Positioning The Projector

    3. Installation Guidelines Positioning the projector Table mounted, front projection Table/Top side facing ceiling SIDE VIEW Projector Screen Optical axis projection lens Floor CD = SH/2 + B - A Screen TOP VIEW Floor BACK VIEW Image 3-2 Table mounted configuration...
  • Page 18 Image 3-3 Table mounted configuration up side down Ceiling mounted, front projection Ceiling/Top side facing floor Projector CD = SH/2 + B - A Image 3-4 Ceiling mounted projector SIDE VIEW Screen Optical axis projection lens Floor Screen TOP VIEW...

  • Page 19: Safety Area Around Projector

    3.3 Safety Area around projector Safety area Make sure the projector is located so that the air inlets and outlets for the cooling system are not obstructed. Leave a safety area A of about 1 meter on the left (top view) of the projector.
  • Page 20 3. Installation Guidelines Image 3-6 Safety area around the projector R5976801 SLM R9+ 20/10/2004...

  • Page 21: Projector Tilting

    Consider the starting point at the lamp side (input side), the following tilting is possible : • Maximum 15° upwards • Maximum 195° downwards (indicated by the allowed projector tilting area) Forwards and backwards tilting Forwards and backwards tilting is allowed. 3.5 Mounting the projection lamp ARNING Unplug the power cord from the wall outlet before starting with the mounting procedure.

  • Page 22: Access To The Lamp Unit

    Pull and remove the side cover 3.5.2 Installation of the new Lamp Unit. What has to be done First remove the lock nut on each spacer screw and next slide the lamp unit into the projector frame. R5976801 SLM R9+ 20/10/2004...
  • Page 23 1. Remove the lock nut on the 3 spacer screws (A). (image 3-10) 2. Line up the lamp unit guides with the guides on the projector frame (B) and push the unit into the frame until it fits. (image 3-11) 3.

  • Page 24: Reinstalling The Side Panel

    Reinstalling the side panel 1. Move the cover guides under the back cover and push the front of the cover against the projector frame lining up the cover lock screw with the speed nut (A) on the frame. (image 3-13, image 3-14) 2.

  • Page 25: Re-Adjusting The Lamp Position In The Lamp Casing

    A suggestion dialog box will be displayed when the projector is restarted after 100 hours and 250 hours. Once ENTER is pressed when that box is open, this box will not be displayed again till the next alert point is reached.
  • Page 26 3. Installation Guidelines Suggestion Lamp runtime is 105 hours It is advisable to adjust the Z-axis of the lamp to obtain maximum light output (see owners manual) <ENTER> to confirm Menu 3-1 The user can now adjust the Z-axis by following the next procedure. How to readjust.

  • Page 27: Lenses

    • Lens Installation • Cleaning the lens 3.7.1 Lenses Standard available lenses for SLM R9+ The projector is designed to be equipped with TLD HB lenses. TLD HB(0.8:1) TLD HB(1.6–2.0:1) TLD HB(2.0–2.8:1) R5976801 SLM R9+ 20/10/2004 3. Installation Guidelines R9842040...

  • Page 28: Lens Selection

    3. Installation Guidelines TLD HB(2.8–5.0:1) TLD HB(5.0–8.0:1) Extra lenses for SLM R9+ The projector can also be equipped with TLD lenses. But when using these lenses, the light output of the projector will be lower. TLD(1.6–2.0:1) TLD(2.0–2.8:1) TLD(2.8–5.0:1) TLD(1.2:1) TLD(0.8:1) TLD(5.0–8.0:1)

  • Page 29: Lens Installation

    4. Push the lens, motors at the top, in the lens block gap horizontally, lining up the motor connector on the lens with the connector on the lens block (B), until the lens clicks in the lens anchor system. (image 3-19) On a table mounted projector, hold the projector when pushing the lens into the lens block to avoid sliding off from Caution: the table.

  • Page 30: Battery Installation In The Rcu

    3. Installation Guidelines ARNING Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the cloth. Do not use liquid cleaners on the cloth as doing so will contaminate the cloth. AUTION Other lenses can also be cleaned safely with this Toraysee 3.8 Battery Installation in the RCU How is the battery delivered ? A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord.
  • Page 31 How to stack? Handle as follow: 1. Put the second projector on the first one so that base plate of the second projector matches with the rigging socket of the first projector. (image 3-22) 2. Turn the rigging sockets of the second projector counter clockwise until they are free to move up and down. (image 3-23) 3.
  • Page 32 How to open a secured rigging point? 1. Push the ring (A) of the first projector downwards and hold it in that position. (image 3-27) 2. Turn the locked part (B) of the second projector a quarter counter clockwise and move it upwards.
  • Page 33 3. Installation Guidelines Image 3-27 Opening the rigging sockets R5976801 SLM R9+ 20/10/2004...
  • Page 34 3. Installation Guidelines R5976801 SLM R9+ 20/10/2004...

  • Page 35: Connections

    4.1 Power connection AC Power cord connection Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at the left of the projector. The power input is 230 VAC.
  • Page 36 <ENTER> to continue Menu 4-1 Lamp run time is maximum runtime hours. Operating the lamp longer than maximum runtime hours may damage the projector. Please replace the lamp. When ENTER is pressed to go on, the warning will be repeated every 30 min.

  • Page 37: Switching To Standby

    4.4 Switching off How to switch off the projector? 1. Press first Standby. 2. Let cool down the projector until the fans stop blowing, at least 15 min. 3. Switch off the projector with the power switch. 4.5 Input Source Connections 4.5.1...

  • Page 38: Input Module Insertion

    When using a RCVDS05, it is recommended to use a 5-cable output module in the RCVDS. The outputs of this module has to be connected to slot 1 of the projector. To switch the projector in the 5-cable mode see "Fixed slot (slot 1 & 2)", page 35.

  • Page 39: Fixed Slot (Slot 1 & 2)

    Slot 1 & 2 has 5 BNC input terminals for 5 cable input and a DVI plug for DVI input. Slot 1 has also an DVI output for loop through to a second projector. Within the installation mode it is possible to setup the input for 5 cable or DVI (PanelLink).

  • Page 40: Serial Digital Input (Slot 3 & 4)

    DVI resync : DVI in signal is resyncronized with a stable clock and put on the DVI out connector When using an RCVDS 05 with a 5 cable output module, connect these 5 cables to this fixed 5-input slot (slot 1) of the projector. All sources of the RCVDS can now be accepted by the projector. 4.5.5 Serial Digital Input (slot 3 &...

  • Page 41: Hd Sdi Digital Input (Slot 3 & 4)

    How to select the digital input? 1. Key in the corresponding slot number on the RCU or the local keypad. When a RCVDS05 is connected to the projector, the SDI input is available by keying in 83 or 84 on the RCU. 4.5.6 HD SDI Digital input (slot 3 &...

  • Page 42: Digital Video Decoder Input

    How to select the digital input? 1. Key in the corresponding slot number on the RCU or the local keypad. When a RCVDS05 is connected to the projector, the SDI input is available by keying in 83 or 84 on the RCU. 4.5.7...
  • Page 43 Green Operation Red Stand-by Two way Hardwired hardwired remote remote CTRL 2 CTRL 3 Hardwired remote CTRL 1 Y/Vid DIGITAL VIDEO DECODER High Bandwidth 5 CABLE INPUT High Bandwidth 5 CABLE INPUT Image 4-7 Component video input Composite Video input S-Video input How to select the digital video decoder input? 1.

  • Page 44: Communication Connections

    1. Use a data cable with at least 9 cores and 2 DB9 female connectors, just cross the pin 2 and pin 3 connection to make a Custom Null Modem Cable. (image 4-8) 2. Use the Custom Null Modem Cable to connect the COM 800 port of the master-projector to the ’To Switcher’ port on the frontside of the COM 800 Splitter. (image 4-9) 3.
  • Page 45 Female Connector Pin Number Pin Number 1 2 3 Female Connector Image 4-8 Make a Custom Null Modem Cable R5976801 SLM R9+ 20/10/2004 4 5 6 7 8 9 4 5 6 7 8 9 4. Connections...
  • Page 46 4. Connections Two Way Hardwired hardwired Green operational remote remote Red Stand-by CTRL 3 CTRL 2 Hardwired remote CTRL 1 Custom Null Modem Cable COM 800 Splitter 1 (R9827941) Two Way hardwired Hardwired Green operational remote remote Red Stand-by CTRL 3 CTRL 2 Hardwired remote...

  • Page 47: Communication With Peripherals

    This infrared receiver unit makes it possible to control the projector from another room. There is a communication line cable between the IR receiver and the projector or the RCVDS. The control information from the RCU can now be sent to the IR Remote Receiver.

  • Page 48: Ethernet Connection

    SDI DIGITAL INPUT High Bandwidth 5 CABLE INPUT High Bandwidth 5 CABLE INPUT Ethernet connection Image 4-10 Always use an Ethernet cable with ferrite core to connect the projector to the LAN. Diagnostic Code IR-Receiver Sync OK RS232/422 OUT COMM PORT...

  • Page 49: Getting Started

    Remote control functions. This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely. This remote control is used for source selection, control, adaptation and set up. It includes automatic storing of picture controls (Bright- ness, Sharpness...) and settings.

  • Page 50: Operating The Projector

    ADJUST key, to enter or exit the adjustment mode. (recessed key), to enter the address of the projector (between 0 and 9). Press the recessed address key with a pencil, followed by pressing one digit button between 0 and 9.

  • Page 51: Switching To Standby

    Overview When the temperature of one of the DMD is too low or too high the projector will be switched automatically to standby. Before switching to standby, the following message appears for 3 seconds on the screen : ’DMD out of operating temperature range.

  • Page 52: Quick Set Up Adjustments

    Quick Lens Adjustment Quick zoom/focus adjustment 1. Press the Selection key *, Barco key. The zoom/focus menu will be displayed. (image 5-3) 2. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image.

  • Page 53: Quick On Screen Color Change

    Image 5-3 Press the selection key * to switch to another pattern. Different patterns are available. Quick shift adjustment 1. Press the Selection key *, Barco key. The zoom/focus menu will be displayed (image 5-3). 2. Press ENTER. The shift menu will be displayed. (image 5-4) 3.

  • Page 54: Using The Rcu

    Hardwired Remote Input 1. Plug one end of the remote cable in the connector on the bottom of the RCU. 2. Plug the other end in the connector in the front panel of the projector labelled RC. (image 5-6) INSTALLATION...
  • Page 55 Hardwired to the XLR input 1. Plug one end of the remote cable in the connector on the bottom of the RCU 2. Plug the other end in the connector in the front panel of the projector labelled Hardwired CTRL2. (image 5-7) Green Operation...

  • Page 56: Projector Address

    Why a projector address ? As more than one projector can be installed in a room, the separate projector should be separately addressable with an RCU or computer. There for each projector has its own address. Set up an individual Projector Address.

  • Page 57: Displaying And Programming Addresses

    The Pause Key When the Pause key is pressed, the image projection is stopped, a black screen will be displayed and the projector remains with full power for immediate restart. The sound is not interrupted. The display on front of the projector will show a "P".
  • Page 58 Select a source number. The Stand-by Key When the Stand-by key is pressed, the image projection is stopped and the projector goes to stand-by. This situation is used when a projection stop is planned for a longer period. R5976801 SLM R9+ 20/10/2004...

  • Page 59: Start Up Of The Adjustment Mode

    Password protection of some items. Some items in the Adjustment mode are password protected. While selecting such an item, the projector asks to enter your password (Password protection is only available when the password strap on the controller module is ON, call an authorized service center to change the position of the password strap).

  • Page 60: Menus On Local Lcd Display

    The menus will be displayed line by line in the same order as they were displayed on the projection screen. Adjustments can be done while the projector is running without projecting the disturbing menus on the screen.

  • Page 61: Random Access Adjustment Mode

    7. RANDOM ACCESS ADJUSTMENT MODE Overview • Overview Flow • Picture Services • Picture Tuning • Geometry • ScenergiX • Picture in Picture (PiP) • Save Changes 7.1 Overview Flow Overview RANDOM ACCES ADJUSTMENT MODE Image 7-1 R5976801 SLM R9+ 20/10/2004 LOAD EDIT RENAME...

  • Page 62: Picture Services

    Connecting a new source. Before using a new source, a correct file has to be installed. The projector’s memory contains a list of files corresponding to the most used sources. When the new source corresponds with one of these files, the file can be loaded and saved for future use. When there is a little difference, the file can also be loaded and then edited until the source specs are reached.

  • Page 63: Start Up

    [Fit] : only the best fitting files will be displayed (with a distinction of ± 2 lines and line duration of ± 300 ns, if nothing is found within this small area, the projector continues searching until it finds something).

  • Page 64: Edit File

    7. Random Access Adjustment Mode How to load a file ? 1. Push the cursor key ↑ or ↓ to select the best fitting file. (menu 7-7) 2. Press ENTER to select. A confirm Load file menu will be displayed with the newly created file and the one on which the new file is based on. (menu 7-8) 3.

  • Page 65: Changing The Settings

    7.2.5.2 Changing the settings Different methods The 3 different methods to change a setting will be described hereafter. These methods are: • with the numeric keys on the remote control. • with the arrow keys selecting the changing digit. • with the arrow keys counting up or down.
  • Page 66 7. Random Access Adjustment Mode Vertical Start number of lines between the start of the input signal and start of the image on the screen. Interlaced [On] or [Off] this selection is automatically filled when active file has to be edited. If the image is wrong due to mismeasurement, use the ENTER key to toggle between [On] and [Off].
  • Page 67 Vertical refresh The way of updating the image information. Not available for PAL-NTSC-SECAM sources. This [sync/async] option will be displayed in gray. • For sources with a vertical frequency up to 60 Hz : the vertical refresh rate is the same as the vertical frequency of the incoming source.

  • Page 68: Rename

    7. Random Access Adjustment Mode 7.2.6 Rename Start Up To change the name of a selected file : 1. Push the cursor key ↑ or ↓ to highlight Rename. (menu 7-13) 2. Press ENTER. The Rename selection menu will be displayed. (menu 7-14) 3.

  • Page 69: Copy

    7.2.7 Copy Start Up To copy the name of a selected file : 1. Push the cursor key ↑ or ↓ to highlight Copy. 2. Press ENTER. The Copy selection menu will be displayed. (menu 7-17) 3. Push the cursor key ↑ or ↓ to select a file name. 4.

  • Page 70: File Options

    7. Random Access Adjustment Mode 4. Press ENTER to select. If [all] is selected, your password has to be entered before all files will be deleted. A confirmation menu "Delete file ’file name’?" is displayed. (menu 7-22) 5. Press ENTER to delete the file, press EXIT if you want to keep it. Note: The active file cannot be deleted.

  • Page 71: Picture Tuning

    If yes, Push the cursor key ↑ or ↓ to highlight one of the preprogrammed color balances. Press ENTER to select Note: Projector white will provide maximum projector light output. The calibrated ’Broadcast’, ’Film’, ’Video’ and ’Computer’ presets will provide optimum color tracking.

  • Page 72: Gamma

    What can be adjusted ? The color space (gamut), the collection of colors which can be reproduced by the projector, can be adjusted to 3 predefined stored values (one projector specific and 2 international standards). A custom adjustment is possible. The maximum color space which can be displayed is the projector color space.

  • Page 73: Noise Reduction

    The Color Space selection menu will be displayed. (menu 7-31) 2. Push the cursor key ↑ or ↓ to highlight the desired color space and press ENTER. Projector Maximum color space European Broadcasting Union. This organization defines a European standard.

  • Page 74: Input Balance

    7. Random Access Adjustment Mode 7.3.6 Input Balance Why adjusting the input balance? The input balance is normally correct adjusted in the factory. But due to signal distribution or signal transmission, a color imbalance can be the result. This imbalance can be adjusted source by source for color critical applications. These adjustments influence only the actual custom adjustment file.

  • Page 75: Input Balance For Yuv Signals

    4. Adjust the contrast to a maximum value until the green noise becomes visible in the white areas and return one step. 5. Adjust with the cursor keys ↑ or ↓ or ← or → until the red respectively blue noise becomes visible in the white areas and return one step.

  • Page 76: Returning To The Factory Defaults

    7. Random Access Adjustment Mode 7.3.6.3 Returning to the factory defaults How to return to the factory defaults 1. Push the cursor key ↑ or ↓ to highlight Default. (menu 7-38) 2. Press ENTER to select. The default settings will be loaded. INPUT BALANCE BLACK BALANCE WHITE BALANCE...

  • Page 77: Geometry Start Up

    7.4.2 Geometry start up Start up 1. Push the cursor key ↑ or ↓ to highlight Geometry. (menu 7-39) 2. Press ENTER to select. The geometry menu will be displayed. (menu 7-40) ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE...

  • Page 78: Size

    7. Random Access Adjustment Mode How to shift the image ? 1. Push the cursor key ↑ or ↓ to highlight Shift. (menu 7-41) 2. Press ENTER to select. 3. Push the cursor key ↑ or ↓ to shift the image in a vertical direction. Push the cursor key ←...

  • Page 79: Side Keystone

    7.4.5 Side Keystone What can be done? The side keystone adjustment is used to align the image if the projector is mounted at a non standard projection angle. R5976801 SLM R9+ 20/10/2004 7. Random Access Adjustment Mode...

  • Page 80: Blanking

    7. Random Access Adjustment Mode Image 7-6 Side Keystone Side keystone adjustment 1. Push the cursor key ↑ or ↓ to highlight Side Keystone. (menu 7-43) 2. Press ENTER to select. 3. Push the cursor key ← or → to adjust the keystone of the image. When the upper part of the image is wider than the lower part of the image, push the cursor key ←.

  • Page 81: Aspect Ratio

    7.4.7 Aspect Ratio Purpose To force the projector in a typical aspect ratio. E.g. projecting a 4:3 image in a 16:9 aspect ratio. R5976801 SLM R9+ 20/10/2004 BLANKING BOTTOM LEFT RIGHT Select with ↑...

  • Page 82: Geometry Options

    7. Random Access Adjustment Mode How to set up the desired aspect ratio ? 1. Push the cursor key ↑ or ↓ to highlight Aspect Ratio. (menu 7-46) 2. Press ENTER to scroll between [5:4], [4:3], [16:9], [2.35], [1.88] or [1.78]. GEOMETRY SHIFT SIZE...

  • Page 83: Order Information

    7.5.1 Order information Order numbers SLM G5 SLM R6 SLM G8/G10 SLM R8/R10/R9+/R12+ 7.5.2 Introduction When available ? ScenergiX is only available as an option, some menu items will be grayed out when this option is not installed. Why ScenergiX ? When working in a multichannel setup the SLM R9+ and its Soft Edge possibilities enable an image blending that gives the appear- ance of a single view, thus achieving realistic immersion for the majority of wide screen applications.

  • Page 84: Preparations

    Scenergix set up Overlap : number of pixels that overlap Horizontal resolution of 1 projector : 1024 for Graphics versions, 1280 for Reality versions, 1400 for SLM R12+. Total horizontal screen resolution : [(horizontal resolution of 1 projector) x 2] minus overlap.

  • Page 85: Scenergix Overlap Zone (Vertical Scenergix)

    Scenergix overlap zone vertical Overlap : number of pixels that overlap Vertical resolution of 1 projector : 768 for Graphics versions, 1024 for Reality versions, 1050 for SLM R12+. Total vertical screen resolution : [(Vertical resolution of 1 projector) x 2] minus (overlap)

  • Page 86: Scenergix Size Adjustment

    3. Use the cursor keys to move the border of the overlap area to the desired position (value between 0 and 255). Set first the width of the first projector and repeat for the second one. (image 7-13, image 7-14)
  • Page 87 7. Random Access Adjustment Mode Image 7-12 Width selections Image 7-13 Width set up for projector 1 R5976801 SLM R9+ 20/10/2004...

  • Page 88: Adjusting The Black Level Of The Images

    7. Random Access Adjustment Mode Image 7-14 Width set up for projector 2 7.5.8 Adjusting the black level of the images For dark images, the overlap zone will be brighter then the rest of the images. Therefore we can rise the black level of the remaining image (excluding the overlap zone).

  • Page 89: Picture In Picture (Pip)

    What are the different possibilities within the PiP mode ? The input section of the SLM projector allows a combinations of different input signals which may be projected in the 2 windows of the PiP screen. The PiP window can be placed in one of the four corners of the main window.

  • Page 90: Picture In Picture Activation

    7. Random Access Adjustment Mode 7.6.2 Picture in Picture activation How to activate PIP? 1. Push the cursor key ↑ or ↓ to highlight PIP. (menu 7-53) 2. Press ENTER to select. The PIP menu will be displayed. (menu 7-54) 3.

  • Page 91: Set Up Of The Quick Selection

    How to position? 1. Push the cursor key ↑ or ↓ to highlight Position. (menu 7-56) 2. Press ENTER to toggle between Top-Left, Top-Right, Bottom-Left or Bottom-Right. STATUS [ON] SOURCE 01 POSITION [Top-Left] QUICK SELECT [OFF] Select with ↑ or ↓ then <ENTER>...
  • Page 92 7. Random Access Adjustment Mode R5976801 SLM R9+ 20/10/2004...

  • Page 93: Installation Mode

    8. INSTALLATION MODE Overview • Start up of the Installation mode • Input Slots • 800 peripheral • Source Switching • No Signal • Contrast Enhancement • Convergence • Configuration • Lens Adjustment • Quick Access Keys • • Internal Patterns 8.1 Start up of the Installation mode Start up 1.

  • Page 94: What If A Switcher Is Connected To The Projector

    What if a switcher is connected to the projector ? If a RCVDS (switched on) or VS05 is connected to the projector, it will be also indicated on the menu by adding +800 peripheral. If no 800 peripheral indication is made on the menu, there are still two possibilities, no RCVDS or VS05 connected or RCVDS is switched off.

  • Page 95: Peripheral

    8.3.1 Defining the output module of the RCVDS05. Which module are available? When a RCVDS05 is connected to the projector, the type of output module of this RCVDS05 has to be defined in the 800 peripheral menu. • standard output module •...

  • Page 96: Clo Using Comm 800

    8. Installation Mode 8.3.3 CLO using Comm 800 What can be done? CLO can be activated in a linked system setup using the COM800 Protocol + Ports. By using the COM800 Protocol + Ports, the RS232 Ports can be used for a RS232 linked setup, CLO is received through the COM800 Ports, general RS232 commands are received through the RS232 Ports.

  • Page 97: No Signal

    Image 8-1 Example of seamless switching with Fade effect. When an effect is selected within seamless source switching, wait until the effect is terminated before switch- ing to another source (± 2 seconds). 8.5 No Signal Overview • Changing the Background Color •...

  • Page 98: Changing The Shutdown Setting

    <ENTER> <EXIT> to return Menu 8-16 8.6 Contrast Enhancement Purpose Increases contrast for all video and data sources. Contrast enhancement will reduce the light output of the projector. NO SIGNAL COLOR [Blue] SHUTDOWN [off] Shutdown time: 5 min Select with ↑ or ↓...

  • Page 99: Convergence

    3. Push the cursor key ↑ or ↓ to highlight the desired contrast enhancement, normal or high. 4. Press ENTER to select. A timer will countdown from 45 seconds to 0. During this time, no action maybe undertaken. The projector is switching the contrast setting and has to recalculate the internal settings. (menu 8-20)

  • Page 100: Lens Adjustment

    8. Installation Mode Set up the Correct Configuration 1. Push the cursor key ↑ or ↓ to highlight Configuration. (menu 8-23) 2. Press ENTER to select. The configuration menu will be displayed. INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST ENHANCEMENT CONVERGENCE CONFIGURATION...

  • Page 101: How To Zoom/Focus

    How to Zoom/Focus ? 1. Push the cursor key ↑ or ↓ to select Zoom/Focus. (menu 8-26) 2. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image.see "Quick Set Up Adjustments", page 48 3.

  • Page 102: Quick Access Keys

    8. Installation Mode Options The zoom/focus and shift can be set the same for all files. 1. Push the cursor key ↑ or ↓ to highlight Options. (menu 8-28) 2. Press ENTER to select. The Lens Options menu will be displayed. (menu 8-29) 3.

  • Page 103: Osd

    <EXIT> to return Menu 8-34 8.12 Internal Patterns What can be done with these internal patterns? The projector is equipped with different internal patterns which can be used for measurement purposes. R5976801 SLM R9+ 20/10/2004 HIGHLIGHT ITEM COLOR [red] MENU POSITION [Default] Select with ↑...

  • Page 104: Available Patterns

    8. Installation Mode Available patterns Outline Hatch Color bars Multiburst Checker board Page Char Alpha numeric char How to select an internal patterns? 1. Push the cursor key ↑ or ↓ to highlight Internal Patterns. (menu 8-36) 2. Press ENTER to select. The internal patterns menu will be displayed.

  • Page 105: Service Mode

    When there is a difference, consult ’Change Baudrate PC’ in this chapter. • Projector Run Time: gives the total run time since the first start up. All projectors leave the factory with a run time of approxi- mately 24 hours.

  • Page 106: Password

    This item is password protected when the password strap is installed. The password function is enabled when the password strap, second switch of S2 on the controller module is installed. Consult an authorized Barco service technician to change the strap position. About password types.

  • Page 107: Access Control List

    Image 9-1 Image 9-3 Metal top cover How to change the password ? 1. Push the cursor key ↑ or ↓ to highlight Change Password. (menu 9-6) 2. Press ENTER to display the Change Password menu. (menu 9-7) Note: Only possible when Owner. The old passwords are displayed.

  • Page 108: Access Levels

    4. Press ENTER to toggle between Y(yes) or N(no). 5. Repeat both steps if necessary. Access Levels An access level can be added to the following items: • Adjustment mode • Barco logo • Change projector address • File delete • File delete all •...

  • Page 109: Changing Language

    1. Push the cursor key ↑ or ↓ to highlight Change Proj Address. (menu 9-13) 2. Press ENTER. The Change Projector Address menu will be displayed and the actual address will be filled in. (menu 9-14) 3. Push the cursor key ↑ or ↓ to highlight Projector address.

  • Page 110: Serial Communication

    <ENTER> Reprogram with ↑,↓,←,→ or numeric keys <ENTER> to confirm <EXIT> to return. Menu 9-16 SERIAL COMMUNICATION PROJECTOR ADDRESS 001 BAUDRATE [115200] INTERFACE STANDARD [RS232] RS422 TERMINATION [ON] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 9-18...

  • Page 111: Baud Rate Setting

    Setting up the Interface Standard Set up The communication protocol for the communication between the projector and a computer can be set on RS232 or RS422. To set up the desired protocol, handle as follow : 1. Push the cursor key ↑ or ↓ to highlight Interface Standard. (menu 9-20) The actual interface standard will be displayed.

  • Page 112: Rs422 Termination

    RS422 Termination Set up The last projector in a line should be RS422 terminated (ON position). All others in the line should be in the OFF position. To change the termination position : 1. Push the cursor key ↑ or ↓ to highlight RS422 Termination. (menu 9-21) The actual setting will be displayed.

  • Page 113: Lamp

    When the CLO function is ON (projector master or slave), the projector will regulate the lamp power until the preprogrammed CLO value (number of lumens) (full line) is reached. As long as this power is below the maximum power of the lamp, the projector will gives a constant light output.
  • Page 114 Linked CLO, used by multiple projectors If the linked CLO function is in the OFF position, the lamp of each projector will follow its own life cycle curve (dotted lines). When in the ON position and linked as described below, all projectors will use the preprogrammed CLO value as long as no projector in the chain is using its maximum lamp power already.
  • Page 115 Using the lamp longer than the maximum run time may damage the projector. number of strikes Total times the lamp is started up.

  • Page 116: Dimming

    [OFF] fixed power, no power adaptation. [SLAVE] follows the master projector to adjust the CLO. When stand alone and the light output should be adjusted, put on slave. [MAS- master projector to control the CLO in a chain of projectors.

  • Page 117: Barco Logo

    OFF: no key on the RCU is used to display the BARCO logo. TEXT: the TEXT key on the RCU is used to display or to remove the BARCO logo with one single push on this key (only in operational mode).

  • Page 118: Add-Ins

    Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 9-31 9.13 Preset Input Balance AUTION Changing these settings may seriously affect the performance of the projector. ADD-INS CLO [INACTIVE] SCENERGIX [INACTIVE] Select with ↑ or ↓ then <ENTER>...

  • Page 119: Advanced Processing

    Other formats will be displayed either unscaled and/or interlaced. This feature can be used if additional delay in the projector is not acceptable. For instance if a projector is showing the DVI loop out of another DLP or if an external scaler/de-interlacer does the processing.

  • Page 120: Diagnosis

    Start up 1. Push the cursor key ↑ or ↓ to highlight Diagnosis. (menu 9-38) 2. Press ENTER to select. The diagnosis menu will be displayed. (menu 9-39) SERVICE BARCO LOGO ADD INS PRESET INPUT BALANCE ADVANCED PROCESSING DIAGNOSIS FACTORY DEFAULTS MORE...

  • Page 121: Dmd

    9.15.3 DMD How to select the overview? 1. Push the cursor key ↑ or ↓ to highlight DMD. (menu 9-42) 2. Press ENTER to select. An overview of the working of the DMD’s will be displayed. (menu 9-43) DIAGNOSIS SMPS LPS1 LPS2 LPS3...

  • Page 122: Voltages

    9.16 Factory defaults What is possible ? The projector will set all settings to the factory defaults which are by default stored in the projector. All custom settings will be deleted and the custom files will be removed. How to return to the factory defaults ? 1.

  • Page 123: Programmable Function Keys

    10. PROGRAMMABLE FUNCTION KEYS 10.1 Function Keys What can be done with these keys? The five function keys on top of an adapted remote control can be programmed as short cut keys (quick access) to almost any adjustment menu. How can a function key be programmed? A function key can only be programmed when in the adjustment mode.
  • Page 124 10. Programmable Function Keys R5976801 SLM R9+ 20/10/2004...

  • Page 125: Standard Source Set Up Files

    A. STANDARD SOURCE SET UP FILES A.1 Table overview Table overview The following standard source files are pre-programmed in the projector. Name Resolu- tion 1600_48V 1600x600i 1600_60V 1600x1200 1600_65V 1600x1200 1600_70V 1600x1200 8514_A 1024x384i 640x200 COMPUSC4 1024x480i 1400x1050 DVI_LOOP 735x480...
  • Page 126 A. Standard Source set up Files Name Resolu- tion INTER_GR 1184x886 MAC_2 640x480 MAC_3 512x384 MAC_4 560_384 512x342 MAC_5 MAC_6 832x624 MAC_7 1024x768 MAC_LC 640x480 MAC_POR 640x870 MUSE 1172x518i MXGA_70 1152x864 MXGA_75 1152x864 MXGA_85 1152x864 PAM500 640x400 PAM800 1120x375i PC98_1 640x400 PC98_2 1120x375i...
  • Page 127 Name Resolu- tion SUNXGA77 1024x768 SUP_MAC 1024x768 SVGA_56V 800x600 SVGA_60V 800x600 SVGA_72V 800x600 SXGA+_1 1400x1050 SXGA+_2 1400x1050 VGA_72V 640x480 VGA_GR 640x480 VGA_TXT 720x400 VGA75ISO 640x480 VID525_2 1024x240 VID625_2 1024x278 VIDEO525 1302x239i VIDEO625 1024x278i VWSCP_50 1280x1024 VWSCP_60 1280x1024 XGA_60 1024x768 XGA_70 1024x768 XGA_70V 1024x768...
  • Page 128 A. Standard Source set up Files R5976801 SLM R9+ 20/10/2004...

  • Page 129: Dust Filter Replacement

    When should it be done ? Depending on the environment, the dust filters should be replaced at least when replacing the lamp. When the projector operates in dusty or contaminated environments, replace the dust filters earlier than when replacing the lamp.

  • Page 130: Dust Filter On The Back Side

    B. Dust filter Replacement Image B-2 Slide out front dust filter Image B-3 Insert front dust filter B.2 Dust filter on the back side Necessary tools • A flatblade screwdriver of 5 mm • Allen key 5 mm How to replace ? 1.
  • Page 131 Image B-4 Back cover removal Image B-6 Pull out dust filter and insert new one R5976801 SLM R9+ 20/10/2004 B. Dust filter Replacement Image B-5 Removing dust filter...
  • Page 132 B. Dust filter Replacement R5976801 SLM R9+ 20/10/2004...

  • Page 133: Troubleshooting

    C. TROUBLESHOOTING C.1 Error codes Overview The following table gives an overview of some important error codes displayed on the LED display of the projector. Error code Description 2002 lamp start failed 6000 tilt switch 5002 ambient overtemperature 1100 Lamp overtemperature...
  • Page 134 5V too low 4115 3V3 too low 4005 Wrong SMPS version Caused by Old SMPS in the projector Action Call a qualified service engineer Call a qualified service engineer Call a qualified service engineer Call a qualified service engineer Call a qualified service engineer...
  • Page 135 Revision Sheet Barco nv Events/Documentation Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.89.70, Fax: +32 56.36.88.24 E-mail: antoon.dejaegher@barco.com, Web: www.barco.com From: Date: Please correct the following points in this documentation (R5976801/01): page wrong R5976801 SLM R9+ 20/10/2004 correct...

This manual is also suitable for:

Slm r9+

Table of Contents

Save PDF