Sanyo MEGAPIXEL VCC-HD5400 Setup Manual
Megapixel camera
Hide thumbs
Also See for MEGAPIXEL VCC-HD5400:
- User manual (145 pages) ,
- Specifications (11 pages) ,
- Service manual (70 pages)
Table of Contents
Advertisement
Quick Links
SUMMARY/SETUP MANUAL
Megapixel Camera
THIS INSTALLATION SHOULD BE MADE
BY A QUALIFIED SERVICE PERSON AND
SHOULD CONFORM TO ALL LOCAL
CODES.
VCC-HD5400
VCC-HD5400P
Before installing and using the camera, please read
this manual carefully.
Be sure to keep it handy for later reference.
In addition, be sure to read carefully the electronic
manual (INSTRUCTION MANUAL) contained in the
supplied CD-ROM to ensure correct operation of
the camera.
Important
•
Be careful when opening holes for installing
the unit. Work with the power and video cables
pulled out for easy installation.
•
Make sure to properly perform waterproofi ng for
the ceiling where you are installing the unit.
•
Make sure that the surface in the installation
location has no unevenness and is strong
enough to bear the total weight of the unit.
•
Install this unit in an environment where the
temperature range stays between –10°C and
+50°C/14°F and 122°F (no condensation
allowed).
•
As a precaution against static electricity
damage, touch a nearby metal object (door
knob, etc.) to dissipate static electricity in your
body before touching this unit.
Advertisement
Table of Contents
Related Manuals for Sanyo MEGAPIXEL VCC-HD5400
Summary of Contents for Sanyo MEGAPIXEL VCC-HD5400
- Page 1 SUMMARY/SETUP MANUAL Megapixel Camera THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL CODES. VCC-HD5400 VCC-HD5400P Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference. In addition, be sure to read carefully the electronic manual (INSTRUCTION MANUAL) contained in the supplied CD-ROM to ensure correct operation of...
-
Page 2: Table Of Contents
Contents Name and Function of Each Component ... 2 Basic Connections ... 5 Installation ... 9 Control/Address Settings ... 11 Address Settings Table... 12 Network Settings ... 13 Specifications ... 14 Copyright Notice ... 16 ■ Accessories ① Pattern sheet ②... -
Page 3: Name And Function Of Each Component
Name and Function of Each Component For the cable type, see the “cable label” attached to the cable bundle. For the detailed connection procedure, refer to the “Basic Connections” section. ( ① 24 VAC 12 VDC ② ① 24 VAC /12 VDC Power cable ②... - Page 4 Name and Function of Each Component ⑦ ⑨ ⑨ ⑦ Control cable By connecting a system controller (sold separately), the camera can be controlled remotely. ⑧ Wire gutter cover If you wire on the ceiling surface, remove the wiring gutter cover. ⑨...
-
Page 5: Sd Memory Card
■ External HDD Use the optional hard disk case (VA-HDC4000) to install the SANYO-specified 2.5" SATA hard disk drive and connect the drive to the EX-HDD terminal. For detailed information on the hard disk case including hard disk installation, refer to the instruction manual supplied with the hard disk case. -
Page 6: Basic Connections
Basic Connections HDMI High-Definition Monitor Connection Connect the HDMI cable to the HD video output terminal (HDMI). You cannot output the video simultaneously from HD video output terminal (HDMI) and from monitor output terminal (MONITOR OUT). When both terminals are used, the HD video output terminal takes precedence. - Page 7 HDMI Connecting an External Hard Disk Put the hard disk in a dedicated hard disk case (VA-HDC4000, sold separately) and then connect the case to the camera. *3: Connect the mini-USB (type B) connector of the USB cable to the camera, connect the other connector (type A) of the cable to a commercially-available USB adapter (female A to male mini B), and connect the adapter to the hard disk case.
-
Page 8: Network Connection
Basic Connections Network Connection This camera is designed so that you can use all of its functions via network operation. By connecting the network (LAN) socket of the camera to your PC using a LAN cable, you can configure and operate it from the Web browser installed on your PC. •... - Page 9 Alarm Cable Connection Use a thicker cable than 24AWG for connection. (Maximum length 600 m/656 yds.) ① Outputting alarm signals (ALARM OUT1-2) Connect a buzzer, lamp, or other alarm device to the alarm output cable. Alarm can be output via two channels. Electronic manual) •...
-
Page 10: Installation
Installation Using the supplied pattern sheet, drill the holes for the cables and screws. • Pull out the cables from the ceiling. Attach the supplied mounting plate to the ceiling using commercially-available screws. (Screw: M4/No. 8 or equivalent) Length: 40 mm/1.6 in or more, Head: φ 8.3 mm/0.3 in •... - Page 11 Ceiling Pattern sheet (supplied) Mount the camera by aligning the triangular marks (▲), then rotate the camera in the arrow (D) direction. • Make sure the camera is securely mounted. Open the side cover and tighten the fall-prevention screw (E) using the supplied hexagonal wrench (F).
-
Page 12: Control/Address Settings
For further information, refer to the “Address Settings Table” on the next page. Switch 6 Switch 5 Corresponding Protocol Automatic switching between Sanyo SSP and high speed SSP Automatic switching between PELCO-D and PELCO-P ❶ ❷ ❶ ❷ ❸ ❸... -
Page 13: Address Settings Table
Address Settings Table In the table, the circle mark “○” means ON. Set switches as shown in the table. When protocol is “SSP (SANYO)”: • Configurable addresses: 1 to 127 • Switch 8 is configured to “OFF”. When protocol is “PELCO”: •... -
Page 14: Network Settings
Network Settings Preparing Your Computer for Network Operation Check your operating environment. ( Connect the camera to the network to which your PC is also connected. Configue the network information on your PC. Configure information such as the IP address of your PC. Install the “H.264 Plug-in”... -
Page 15: Specifications
Audio input (white: 3.5-mm mini jack) Audio output (black: 3.5-mm mini jack) RS-485 SSP, PELCO-D 2400, 4800, 9600, 19200 1 - 255 (sanyo SSP: 1 to 127) Normal recording, alarm recording, backup video recording in event of a network failure, log information... - Page 16 Specifications ■ Network Image/video compression H.264/JPEG Video size (H.264) Video size (JPEG) Picture quality Interface Protocol Audio Simultaneous access Security ■ Others Operating ambient temperature/humidity Power source Power consumption Weight Dimensions Appearance and specifications are subject to change without prior notice or obligations. (16:9) 1920×1080, 1280×720, 640×360, 320×180 (4:3) 1600×1200, 1280×960, 1024×768, 640×480, 320×240 (16:9)1920×1080, 1280×720, 1024×576, 640×360...
-
Page 17: Copyright Notice
Copyright Notice The instruction manual and the software are copyrighted by SANYO Electric Co., Ltd. No materials contained in the manual and the software may, wholly or partially, be copied, modified, reproduced, or distributed in any format without the prior permission of the copyright holder.