Table of Contents
Advertisement
3.2.4 Injection screen
Operating sequences
Press Injection key to enter the injection screen. See Fig 3-34.
The system offers four Injection modes and three Pressure holding
modes, and the transition between injection and pressure holding can be
selected. On this screen, corresponding parameters can be set, such as
position, pressure, flow and time.
Injection 1(Inject 1) － set the position, pressure, flow and time of
injection 1.
Injection 2 (Inject 2) － set the position, pressure, flow and time of
injection 2.
Injection 3 (Inject 3) － set the position, pressure, flow and time of
injection 3.
Injection 4 (Inject 4) － set the position, pressure, flow and time of
injection 4.
Transition mode (TraMode) － it refers to the transition mode between
injection and pressure holding. Three modes can be selected: Position
mode, Time mode, and Position/Time mode.
Holding 1 －set the pressure, flow and time for pressure holding 1.
Holding 2 － set the pressure, flow and time for pressure holding 2.
Holding 3 － set the pressure, flow and time for pressure holding 3.
Screw position (ScwPos) － display the current position of screw.
Press Manual injection key
Decompression key
SIJECT 15/16 Operation Manual
Fig 3-34
Injection screen
to do injection once manually, and press
to suck back once.
SIJECT OP15B Screens
3-43
Advertisement
Chapters
Table of Contents
