Iox_Admin_Config_File= Variable - Cisco ASR 9000 Series Configuration Manual
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Managing Configuration Files in ROM Monitor
Command or Action
2 = MBI Validation Boot Mode
[0]:
2
Step 10
Enter boot type as 2.
Example:
enter boot type:
0 = ROM Monitor
2 = MBI Validation Boot Mode
[0]:
2
Step 11
reset
Example:
rommon B5 >reset
Specifying a Permanent Alternative Administrative Configuration File with
the IOX_ADMIN_CONFIG_FILE= Variable
This mode of alternative administrative configuration with the IOX_ADMIN_CONFIG_FILE= variable is
permanent in nature. After this variable is set, this mode allows the router to always boot from this alternative
configuration, and the system does not revert to the default commited configuration on the next system reload.
Note
When the router boots with the external configuration specified by the IOX_ADMIN_CONFIG_FILE=
variable, the system loses the default configuration. The default configuration is completely replaced with
this alternative configuration.
To permanently change the location of the default administration configuration file, specify the filename and
directory path in the IOX_ADMIN_CONFIG_FILE= environment variable while in ROM Monitor mode.
Specifying the environment variable forces the use of the specified file for all boots while this variable is set.
OL-30420-01
Specifying a Permanent Alternative Administrative Configuration File with the IOX_ADMIN_CONFIG_FILE= Variable
Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x
Purpose
Set the boot type as 2 for standy RSP to enable MBI validation
mode or the EXEC mode during the next system boot.
Resets the standby RSP so that the new setting can take effect
and the standby RSP card becomes operational.
43
Hide quick links:
Advertisement
Table of Contents
