Prerequisites; Archiving Cisco Ios Xr Image On A Local Disk - Cisco ASR 9000 Series Configuration Manual
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Prerequisites
Prerequisites
Before implementing the Archive and Restore feature on the Cisco ASR 9000 Series Routers, verify that the
these prerequisites have been met:
• ROMMON version 1.0 or a later version has been installed.
• Cisco IOS XR Release 3.9.0 or a later release has been installed.
• The minimum size of compactflash is 1 GB or higher on all RSP cards.
Archiving Cisco IOS XR Image on a Local Disk
The Cisco IOS XR software and configuration files can also be saved on a local storage device, such as a
compactflash disk. You can backup the content of the active RSP card on the compactflash disk. This process
creates a backup of these media devices and variables on the compactflash device:
• /disk0:
• /disk0a:
• /disk1:
• /disk1a:
• /bootflash:
• Few variables in NVRAM (puf extension files and ROMMON environment variables)
SUMMARY STEPS
1. TURBOBOOT=on, {boot-device},[format | clean],[nodisablebreak]
2. Verify the existence of compactflash in the Active RSP card.
3. format compactflash:
4. show platform command and show redundancy summary command
5. run command followed by ksh /pkg/sbin/archive compactflash:
6. exit
DETAILED STEPS
Command or Action
Step 1
TURBOBOOT=on, {boot-device},[format |
clean],[nodisablebreak]
Example:
rommon B9>
TURBOBOOT=on,disk0,format,nodisablebreak
Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x
78
Image Refresh Using the Archive and Restore Feature
Purpose
Sets the TURBOBOOT parameters and saves the configuration
in the ROM Monitor configuration mode. Separate each
parameter with a comma (,).
OL-30420-01
Hide quick links:
Advertisement
Table of Contents
