Cisco 7800 Series Administration Manual page 141
Hide thumbs
Also See for 7800 Series:
- Administration manual (360 pages) ,
- Administrator's manual (234 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
Cisco IP Phone Administration
Step 4
Enable MLPP Authorization for a device by checking the MLPP User Authorization check box.
When the MLPP User Authorization check box is enabled, the system challenges the AS-SIP phone for the
user's credentials when a precedence call is made.
Step 5
Set the Resource Priority namespace.
An AS-SIP phone is associated with a single Resource Priority namespace.
If <None> is left as the namespace in the SIP profile, then the default namespace is used.
All devices using this profile must be restarted.
Step 6
Select Apply.
Step 7
Choose Device > Phone.
Step 8
Locate the phone that you are setting up.
Step 9
Navigate to the MLPP section and set the following fields:
• MLPP Indication:
• MLPP Preemption: Determines whether preemption for reuse can be performed on the device. This type
of preemption is used to remove an existing call and offer a higher precedence call to the user of the
device.
Step 10
Choose User Management > End User and select a user.
Step 11
Navigate to the MLPP Authorization section and configure MLPP Authorization for a user.
The MLPP User Identification number must be composed of 6 to 20 numeric characters.
The MLPP Password must be composed of 4 to 20 numeric (0-9) characters
The Precedence Authorization level can be set to any standard precedence level from Routine to Executive
Override
Step 12
Select Save.
Step 13
Set up the MLPP DSCP for an End User.
The DSCP values for video streams can be configured for each precedence level in the QoS section of the
Service Parameters. All DSCP values include the decimal value in the setting.
• Set the MLPP Indication to On to enable MLPP regardless of the enterprise or common config
settings.
• Set the MLPP Indication to Default and MLPP is enabled for a device at the common device config
or enterprise parameter levels.
• When MLPP Indication is set to Off, MLPP is disabled for the device regardless of the common
device or enterprise parameter configuration.
• When set to Disabled, only preemption 'not for reuse' can be performed on the device. This type
of preemption occurs when the user is not the called party but is in a call with the called party or is
using a preempted network resource. For example, a trunk channel or reserved bandwidth allocation.
• When set to Forceful, preempt for reuse is enabled. Existing calls may be preempted to offer a
higher precedence call to the user.
• When set to Default, the setting from the common configuration or enterprise level is used.
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Set up AS-SIP
127
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
