Table of Contents
Advertisement
New installation
NOTICE
Re-installation formats the hard disk
The re-installation of the SINEMA RC Server includes its own operating system. If you use
a PC on which an operating system already exists, the hard disk will be formatted. This
means that existing data is lost. Make sure that all important data on the PC has been
backed up.
1. Insert the data medium in the drive. Installation starts automatically.
2. Switch on the PC or restart the server. Installation starts automatically.
3. In the following dialog, select the entry "Install/Update SINEMA Remote Connect Server".
Press <Return> to confirm the selection.
If SINEMA RC Server V1.2 is already installed, in the following dialog select "Install -
Fresh installation". The previous configurations of the SINEMA RC Server are not
adopted.
4. Follow the further instructions on the screen.
During the installation, make the following settings for the WAN interface:
– IP address
– Network mask
– Gateway
Result
The SINEMA RC Server V1.3 is installed. Login with the predefined user "admin".
Before you can configure further settings with the WBM, you will be requested to create a
new user and to check the network configuration.
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
Installation and commissioning
3.2 Installing SINEMA RC Server
27
- Quick Links:
- Requirements
- Installing Sinema Rc Server
Hide quick links:
Advertisement
Table of Contents
