Counting Individual Flow Statistics; Clearing Fib Statistics - Cisco MDS 9000 Series Configuration Manual
Hide thumbs
Also See for MDS 9000 Series:
- Command reference manual (1464 pages) ,
- Configuration manual (308 pages) ,
- Troubleshooting manual (161 pages)
Table of Contents
Advertisement
Configuring Fibre Channel Routing Services and Protocols
Step 3
switch(config)# no fcflow stats aggregated module 1 index 1005 vsan 1
switch(config)#
Disables the aggregated flow counter.
Counting Individual Flow Statistics
To count the flow statistics for a source and destination FC ID in a VSAN, follow these steps:
Step 1
switch# config t
switch(config)#
Enters configuration mode.
Step 2
switch(config)# fcflow stats module 1 index 1 0x145601 0x5601ff 0xffffff vsan 1
switch(config)#
Enables the flow counter.
The source ID and the destination ID are specified in FC ID hex format (for example, 0x123aff). The mask can
Note
be one of 0xff0000 or 0xffffff.
Step 3
switch(config)# no fcflow stats aggregated module 2 index 1001 vsan 2
switch(config)#
Disables the flow counter.
Clearing FIB Statistics
Use the clear fcflow stats command to clear the aggregated flow counter (see Examples
Flow Counters, on page 201
Clears Aggregated Flow Counters
switch# clear fcflow stats aggregated module 2 index 1
Clears Flow Counters for Source and Destination FC IDs
switch# clear fcflow stats module 2 index 1
and
Clears Flow Counters for Source and Destination FC IDs, on page
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
Counting Individual Flow Statistics
Clears Aggregated
201).
201
Advertisement
Table of Contents
