hit counter script
Sony HCD-GS200 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo System
  5. HCD-GS200
  6. Service manual
Sony HCD-GS200 Service Manual

Sony HCD-GS200 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

QQ
3 7 63 1515 0
SERVICE MANUAL
Ver 1.2 2003. 10
HCD-GS200 is the Amplifier, CD player, Tape
Deck and Tuner section in MHC-GS200.
TE
L 13942296513
Amplifier section
U.S.A. models:
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohms loads both channels driven, from
120 – 10,000 Hz; rated 60 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
Continuous RMS power output
Total harmonic distortion less than 0.09%
www
.
Sony Corporation
9-874-022-03
2003J16-1
Home Audio Company
© 2003.10
Published by Sony Engineering Corporation
http://www.xiaoyu163.com
Inputs
VIDEO (MD) IN (phono jacks):
GAME (AUDIO) IN (phono jack):
AUDIO IN (phono jacks): 450mV 47 kilohms
Outputs
PHONES (stereo phono jack):
FRONT SPEAKER:
60 + 60 watts
CD player section
(6 ohms at 1 kHz,
System
10% THD)
Laser
(6 ohms at 1 kHz,
35 watts)
Frequency response
Wavelength
Signal-to-noise ratio
Dynamic range
OPTICAL OUT (CD)
(Square optical connector jack, rear panel)
Wavelength
Output Level
x
ao
y
i
http://www.xiaoyu163.com
HCD-GS200
8
Model Name Using Similar Mechanism
CD Mechanism Type
CD
Section
Base Unit Name
Optical Pick-up Name
Model Name Using Similar Mechanism
TAPE
Section
Tape Transport Mechanism Type
Q Q
3
6 7
1 3
SPECIFICATIONS
voltage 250 mV/450 mV,
impedance 47 kilohms
voltage 450 mV,
impedance 47 kilohms
accepts headphones of
8 ohms or more
accepts impedance of 6 to
16 ohms
Compact disc and digital
audio system
Semiconductor laser
(λ = 780 nm)
Emission duration:
continuous
2 Hz – 20 kHz (±0.5 dB)
780 – 790 nm
More than 90 dB
More than 90 dB
660 nm
–18 dBm
COMPACT DISC DECK RECEIVER
u163
.
2 9
9 4
2 8
Canadian Model
HCD-GS300AV
CDM64B-K1BD47A
BU-K1BD47A
KSM-213BFN
HCD-GS300AV
CMAL1Z221
1 5
0 5
8
2 9
9 4
Tape player section
Recording system
Frequency response
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
Antenna
Antenna terminals
North American model:
Intermediate frequency
AM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate frequency
— Continued on next page —
m
co
9 9
US Model
2 8
9 9
4-track 2-channel stereo
40 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassette
87.5 – 108.0 MHz
FM lead antenna
75 ohms unbalanced
10.7 MHz
530 – 1,710 kHz
(with the interval set at
10 kHz)
531 – 1,710 kHz
(with the interval set at
9 kHz)
AM loop antenna
External antenna terminal
450 kHz

Advertisement

Table of Contents
loading

Related Manuals for Sony HCD-GS200

Summary of Contents for Sony HCD-GS200

  • Page 1 HCD-GS200 3 7 63 1515 0 SERVICE MANUAL US Model Canadian Model Ver 1.2 2003. 10 HCD-GS200 is the Amplifier, CD player, Tape Deck and Tuner section in MHC-GS200. Model Name Using Similar Mechanism HCD-GS300AV CD Mechanism Type CDM64B-K1BD47A Section...

  • Page 2: Table Of Contents

    HCD-GS200 3 7 63 1515 0 General Power requirements 120 V AC, 60 Hz Power consumption 120 watts Dimensions (w/h/d) incl. projecting parts and controls Approx. 280 × 325 × 465 mm Mass Approx. 8.7 kg Supplied accessories: Remote commander (1)

  • Page 3: Leakage Test

    CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.

  • Page 4: Servicing Notes

    HCD-GS200 SECTION 1 SERVICING NOTES 3 7 63 1515 0 CD-TEXT TEST DISC CLEANING OBJECTIVE LENS OF OPTICAL PICK-UP • In cleaning the objective lens of optical pick-up, be sure the following below. This unit is able to display the test data (character information) written in the CD on its fluorescent indicator tube.

  • Page 5: General

    HCD-GS200 SECTION 2 GENERAL 3 7 63 1515 0 This section is extracted from instruction manual. ALPHABETICAL ORDER BUTTON DESCRIPTIONS =/1 (power) 1 A – O P – Z m (rewind) 4 ALBM +/– 4 (19) PAUSE X 5 (15, 23 – 25)
  • Page 6 HCD-GS200 3 7 63 1515 0 ALPHABETICAL ORDER BUTTON DESCRIPTIONS Setting the clock @/1 (power) 4 A – O P – Z n N (play) 0 ALBM +/ALBM – qd w; (19) PLAY MODE 2 (14 – 17, 23) Press =/1 to turn on the system.

  • Page 7: Disassembly

    HCD-GS200 SECTION 3 DISASSEMBLY 3 7 63 1515 0 • This set can be disassembled in the order shown below. CABINET TOP CASSETTE HOLDER, FRONT CABI ASSY MECH DECK (CMAL1Z221) BACK PANEL ASSY BELT MAIN BOARD AMP BOARD HEADPHONE...

  • Page 8: Cabinet Top

    HCD-GS200 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. 3-1. Cabinet Top qd cabinet top 9 three screws (BVTP3 × 8) 6 two screws (BVTP3 × 8) 8 panel side (L) 5 three screws (BVTP3 ×...

  • Page 9: Back Panel Assy

    HCD-GS200 3 7 63 1515 0 3-3. Back Panel Assy 2 two screws (BVTP3 × 10) back panel assy 4 two screws (BVTP3 × 10) 5 screw (BVTP3 × 10) 3 dc fan (M391) 1 connector 2p (CN601) 6 three screws (BVTP3 ×...

  • Page 10: Amp Board

    HCD-GS200 3 7 63 1515 0 3-5. AMP Board 3 two screws (BVTP3 × 8) 2 screw (BVTP3 × 8) 4 AMP board 1 connector 6p (CN502) L 13942296513 3-6. POWER Board 4 POWER board 3 power, cord 2 two screws (BVTP4 ×...

  • Page 11: Holder (Led-S), Bracket (Middle-R)

    HCD-GS200 3 7 63 1515 0 3-7. Holder (LED-S), Bracket (Middle-R), Power Bracket 6 bracket (middle-R) 5 two screws (BVTP3 × 8) 4 three screws (BVTP3 × 8) 2 screw (BVTP3 × 8) 8 three screws (BVTP3 × 8) 9 two screws (BVTP3 ×...

  • Page 12: Base Unit (Bu-K1Bd47A), D.sensor (Out) Board, T.sensor Board

    HCD-GS200 3 7 63 1515 0 3-9. Base Unit (BU-K1BD47A), D.SENSOR (OUT) Board, T.SENSOR Board 4 screw (BVTP3 × 8) 5 D.SENSOR (OUT) board 3 base unit (BU-K1BD47A) 2 bracket (top 60) 1 three screws (BVTP3 × 8) 6 three screws (BVTP3 ×...

  • Page 13: Cd Led Board

    HCD-GS200 3 7 63 1515 0 3-11. CD LED Board Opens to right and left and CD LED BOARD 3 CD LED board is removed upwards from a slot. L 13942296513 3-12. BU Holder Assy 1 tension spring (F1)

  • Page 14: Cd Board

    HCD-GS200 3 7 63 1515 0 3-13. CD Board 7 optical pick-up(KSM-213BFN) 5 parallel (FFC) (16 core) wire (CN102) 6 CD board 1 Remove two solders. 3 screw (P2 × 5) 2 Remove two solders. L 13942296513 3-14. Cassette Holder, Mech Deck (CMAL1Z221)

  • Page 15: Belt

    HCD-GS200 3 7 63 1515 0 3-15. Belt 1 two screws fly wheel mech deck (CMAL1Z221) *Cautions of an assembly 5 belt fly wheel 4 belt 3 dc motor dc motor 2 Remove two L 13942296513 solders. 3-16. DISPLAY Board...

  • Page 16: Key Board

    HCD-GS200 3 7 63 1515 0 3-17. KEY Board 2 KEY board 1 two screws (BVTP2.6 × 8) L 13942296513 3-18. HEADPHONE Board, GAME LINK Board 5 GAME LINK board 4 two screws (BVTP2.6 × 8) 2 decoration panel...

  • Page 17: Door Led Board

    HCD-GS200 3 7 63 1515 0 3-19. DOOR LED Board 1 connector 2p (CN704) 3 two screws (BVTP2.6) CD window L 13942296513 CD lid CD holder (A) 0 DOOR LED Board CD window u163 http://www.xiaoyu163.com...

  • Page 18: Test Mode

    HCD-GS200 SECTION 4 TEST MODE 3 7 63 1515 0 [Panel Test Mode] [CD Service Mode] • This mode can run the CD sled motor optionally. Use this mode, Procedure: [MENU] [DISPLAY] 1. Press three buttons of , and simulta- for instance, when cleaning the optical pick-up.

  • Page 19: Mechanical Adjustments

    HCD-GS200 SECTION 5 SECTION 6 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS 3 7 63 1515 0 • TAPE MECHANISM DECK SECTION DECK SECTION 0 dB = 0.775 V Precaution 1. Clean the following parts with a denatured alcohol-moistened Precaution swab: 1. Demagnetize the record/playback head with a head demagne-...
  • Page 20 HCD-GS200 3 7 63 1515 0 Record/Playback Head Azimuth Adjustment Adjustment Location: Record/Playback/Erase Head Procedure: 1. Mode: Playback (FWD) test tape AMP board Head azimuth P-4-A100 FRONT SPEAKER terminal (J501) adjustment screw (10 kHz, – 10 dB) L-CH, R-CH level meter –...
  • Page 21 HCD-GS200 3 7 63 1515 0 RFAC Level Check CD SECTION Connection: Note: oscilloscope 1. CD Block is basically designed to operate without adjustment. There- fore, check each item in order given. CD board 2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated.
  • Page 22 HCD-GS200 3 7 63 1515 0 E-F Balance Check Checking Location: Connection: – CD BOARD (Conductor Side) – oscilloscope CD board TP (TE1) TP (DVC) – Procedure: Connect an oscilloscpe to test point TP (TE1) and TP (DVC) on the CD board.

  • Page 23: Diagrams

    HCD-GS200 SECTION 7 DIAGRAMS 3 7 6 3 1 5 1 5 0 7-1. Circuit Boards Location • Waveforms – CD Board – – MAIN Board – – DISPLAY Board – IC101 t; (RFAC) IC801 qa (SUBXOUT) IC701 id (X1)

  • Page 24: Block Diagrams

    HCD-GS200 7-2. Block Diagrams – CD Section – 3 7 6 3 1 5 1 5 0 OPTICAL PICK-UP BLOCK IC101 IC103 DIGITAL SERVO (KSM-213BFN) RF AMP DIGITAL SIGNAL PROC. IC309 OPTICAL OPTICAL RF AC RFAC D OUT OUT(CD)

  • Page 25: Tuner/Tape Section

    HCD-GS200 – TUNER/TAPE Section – 3 7 6 3 1 5 1 5 0 TUNER PACK TUNER L-CH FM ANT L-CH SECTION FM 75Ω ANT GND R-CH R-CH • R-CH is omitted due to same as L-CH. AM ANT TU-DI •...

  • Page 26: Amp Section

    HCD-GS200 – AMP Section – 3 7 6 3 1 5 1 5 0 J882 PHONES IC301 INPUT SELECTOR,VOLUME,DBFB J501 CD-L INB1 OUT1 SECTION IC501 – FRONT SPEAKER TUNER POWER AMP IMPEDANCE TUNER L-CH R-CH INC1 BB_A1 USE 6-16Ω...

  • Page 27: Display/Power Section

    HCD-GS200 – DISPLAY/POWER Section – 3 7 6 3 1 5 1 5 0 IC701 DISPLAY CONTROLLER S751 – 755 FUNCTION KEY S701 GAME MIXING FL701 FLUORESCENT S770 – 777 INDICATOR TUBE FUNCTION KEY Q723 - 726 GRID DRIVE S760 –...

  • Page 28: Printed Wiring Board - Cd Section

    HCD-GS200 7-3. Printed Wiring Board – CD Section – • See page 23 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location IC101 IC103 IC104 IC121 IC150 Q101 IC150...

  • Page 29: Schematic Diagram - Cd Section

    HCD-GS200 7-4. Schematic Diagram – CD Section – • See page 23 for Waveforms. • See page 42 for IC Block Diagrams. 3 7 6 3 1 5 1 5 0 • See page 43 for IC Pin Function Description.

  • Page 30: Printed Wiring Board - Cd Motor/Sensor Section

    HCD-GS200 7-5. Printed Wiring Board – CD MOTOR/SENSOR Section – • See page 23 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 IC11 M441 M442 IC12 IC13 1 3 9 4 2 2 9 6 5 1 3...

  • Page 31: Schematic Diagram

    HCD-GS200 7-6. Schematic Diagram – CD MOTOR/SENSOR Section – 3 7 6 3 1 5 1 5 0 (Page 33) 1 3 9 4 2 2 9 6 5 1 3 (Page 33) (Page 33) (Page 33) (Page 33)

  • Page 32: Printed Wiring Board - Main Section

    HCD-GS200 7-7. Printed Wiring Board – MAIN Section – • See page 23 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 IC481 IC301 C 3 0 5 R 3 0 5 JR201 IC302 (CMAL1Z221)

  • Page 33: Schematic Diagram - Main Section (1/3)

    HCD-GS200 7-8. Schematic Diagram – MAIN Section (1/3) – • See page 42 for IC Block Diagrams. 3 7 6 3 1 5 1 5 0 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 http://www.xiaoyu163.com...

  • Page 34: Schematic Diagram - Main Section (2/3)

    HCD-GS200 7-9. Schematic Diagram – MAIN Section (2/3) – • See page 23 for Waveforms. • See page 45 for IC Pin Function Description. 3 7 6 3 1 5 1 5 0 1 3 9 4 2 2 9 6 5 1 3...

  • Page 35: Schematic Diagram - Main Section (3/3)

    HCD-GS200 7-10. Schematic Diagram – MAIN Section (3/3) – 3 7 6 3 1 5 1 5 0 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 http://www.xiaoyu163.com...

  • Page 36: Printed Wiring Board - Amp Section

    HCD-GS200 7-11. Printed Wiring Board – AMP Section – • See page 23 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 CNP902 J701 CNP702 1 3 9 4 2 2 9 6 5 1 3 •...

  • Page 37: Schematic Diagram - Amp Section

    HCD-GS200 7-12. Schematic Diagram – AMP Section – 3 7 6 3 1 5 1 5 0 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 http://www.xiaoyu163.com...

  • Page 38: Printed Wiring Board - Display Section

    HCD-GS200 7-13. Printed Wiring Board – DISPLAY Section – • See page 23 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location D701 D702 D714 D715 D721 F-11 D722...

  • Page 39: Schematic Diagram - Display Section

    HCD-GS200 7-14. Schematic Diagram – DISPLAY Section – • See page 47 for IC Pin Function Description. • See page 23 for Waveforms. 3 7 6 3 1 5 1 5 0 1 3 9 4 2 2 9 6 5 1 3...

  • Page 40: Printed Wiring Board - Power Section

    HCD-GS200 7-15. Printed Wiring Board – POWER Section – • See page 23 f or Circuit Boards Location. 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location D901 D902 D903 D904 D905 D906...

  • Page 41: Schematic Diagram - Power Section

    HCD-GS200 7-16. Schematic Diagram – POWER Section – 3 7 6 3 1 5 1 5 0 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 http://www.xiaoyu163.com...

  • Page 42: Ic Block Diagrams

    HCD-GS200 7-17. IC Block Diagrams 3 7 6 3 1 5 1 5 0 – CD Board – – MAIN Board – IC103 CXA2581N-T4 IC101 CXD3068Q IC401 BA6780 RW/ROM DC OFST VIN1 VIN2 RFDCI – – RFDCO FIN1 FIN2...

  • Page 43: Ic Pin Function Description

    HCD-GS200 3 7 63 1515 0 7-18. IC Pin Function Description • IC104 TC94A20F-CX4 D/A Converter, MP3 Decoder (CD Board) Pin No. Pin Name Description RESET Reset input terminal “L”: reset MIMD Microcomputer interface mode selection input “H”: I2C, “L”: TSB (fixed at “H”) MICS/AD0 Microcomputer interface chip select signal input (fixed at “L”)
  • Page 44 HCD-GS200 3 7 63 1515 0 Pin No. Pin Name Description VSSP – Ground for VCO circuit PLL phase error detection signal output VCOI VCO control voltage input VDDP – Power supply (2.5V) for VCO circuit External clock output VDDX –...
  • Page 45 HCD-GS200 3 7 63 1515 0 • IC801 M30624MGN-A01FP System Controller (MAIN Board) Pin No. Pin Name Description TABLE POS Table motor control signal output to the motor driver (IC401) LOAD POS Loading motor control signal output to the motor driver (IC401)
  • Page 46 HCD-GS200 3 7 63 1515 0 Pin No. Pin Name Description PL-DATA Serial data output to the PROLOGIC IC Not used PL-CLK Serial clock ouput to the PROLOGIC IC Not used PL-RQ Request signal output to the PROLOGIC IC Not used...
  • Page 47 HCD-GS200 3 7 63 1515 0 • IC701 MB90M407APF-G-113-BND Display Controller (DISPLAY Board) Pin No. Pin Name Description LED16/PIP16 Grid drive signal output to the fluorescent indicator tube (FL701) 2 to 6 FIP17 to FIP21 Grid drive signal output to the fluorescent indicator tube (FL701)

  • Page 48: Exploded Views

    HCD-GS200 Ver 1.1 2003.09 SECTION 8 EXPLODED VIEWS 3 7 63 1515 0 NOTE: • -XX, -X mean standardized parts, so they may • The mechanical parts with no reference number The components identified by mark 0 or have some differences from the original one.

  • Page 49: Front Panel Section

    HCD-GS200 Ver 1.1 2003.09 3 7 63 1515 0 8-2. Front Panel Section including RV752 FL701 L 13942296513 S791 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-238-197-11 LID CD 4-238-196-01 DECORATION PANEL 4-238-198-01 HOLDER CD (A)

  • Page 50: Chassis Section

    HCD-GS200 Ver 1.2 2003.10 3 7 63 1515 0 8-3. Chassis Section mechanism deck section-1 (CDM64B-K1BD47A) F901 not supplied F902 supplied L 13942296513 T901 not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description...

  • Page 51: Mechanism Deck Section-1 (Cdm64B-K1Bd47A)

    HCD-GS200 3 7 63 1515 0 8-4. Mechanism Deck Section-1 (CDM64B-K1BD47A) not supplied Base Unit Section (BU-K1BD47A) L 13942296513 mechanism deck section-2 (CDM64B-K1BD47) not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-684-161-11 D.SENSOR (IN) BOARD...

  • Page 52: Mechanism Deck Section-2 (Cdm64B-K1Bd47A)

    HCD-GS200 3 7 63 1515 0 8-5. Mechanism Deck Section-2 (CDM64B-K1BD47A) L 13942296513 M441 M442 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-216-067-01 SPRING (CLAMP), COMPRESSION A-4672-676-A CAM ASSY 3-701-441-21 WASHER 4-933-134-21 SCREW (+PTPWH M2.6X10)
  • Page 53 HCD-GS200 3 7 63 1515 0 8-6. Base Unit Section (BU-K1BD47A) L 13942296513 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-4728-548-A CD BOARD, COMPLETE 1-782-817-11 WIRE (FLAT TYPE) (16 CORE) 0 602 A-3328-818-A OPTICAL PICK-UP (KSM-213BFN)

  • Page 54: Electrical Parts List

    HCD-GS200 SECTION 9 ELECTRICAL PARTS LIST 3 7 63 1515 0 NOTE: • Due to standardization, replacements in the • COILS • Abbreviation uH: µH parts list may be different from the parts CND : Canadian model specified in the diagrams or the components •...
  • Page 55 HCD-GS200 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks Q515 8-729-036-89 TRANSISTOR KTC3198GR-A R561 1-216-845-11 METAL CHIP 100K 1/16W Q517 8-729-920-31 TRANSISTOR DTC343TK-T-146 Q518 8-729-920-31 TRANSISTOR DTC343TK-T-146 R562 1-216-845-11 METAL CHIP...
  • Page 56 HCD-GS200 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C209 1-162-927-11 CERAMIC CHIP 100PF < IC > C211 1-107-826-11 CERAMIC CHIP 0.1uF 10.00% 16V C212 1-162-966-11 CERAMIC CHIP 0.0022uF 10%...
  • Page 57 HCD-GS200 CD LED DISPLAY 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R252 1-216-857-11 METAL CHIP 1/16W C715 1-107-826-11 CERAMIC CHIP 0.1uF 10.00% 16V R253 1-216-821-11 METAL CHIP 1/16W C723 1-126-956-91 ELECT 0.1uF...
  • Page 58 HCD-GS200 DISPLAY 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks JR708 1-216-864-11 METAL CHIP 1/16W R746 1-216-845-11 METAL CHIP 100K 1/16W JR709 1-216-864-11 METAL CHIP 1/16W R747 1-216-833-11 METAL CHIP...
  • Page 59 HCD-GS200 DOOR LED D.SENSOR (IN) D.SENSOR (OUT) GAME LINK 3 7 63 1515 0 HEADPHONE LOAD SW L.T MOTOR MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 1-684-150-11 DOOR LED BOARD 1-684-152-11 HEADPHONE BOARD...
  • Page 60 HCD-GS200 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C105 1-126-964-11 ELECT 10uF 20.00% 50V C441 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50V C442 1-104-665-11 ELECT 100uF 20.00% 10V C106...
  • Page 61 HCD-GS200 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C954 1-126-967-11 ELECT 47uF 20.00% 50V < JUMPER RESISTOR > C955 1-165-319-11 CERAMIC CHIP 0.1uF JR101 1-216-864-11 METAL CHIP 1/16W...
  • Page 62 HCD-GS200 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R103 1-216-819-11 METAL CHIP 1/16W R403 1-216-864-11 METAL CHIP 1/16W R104 1-216-841-11 METAL CHIP 1/16W R404 1-249-382-11 CARBON 1/6W F...
  • Page 63 HCD-GS200 MAIN POWER 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R801 1-216-833-11 METAL CHIP 1/16W R937 1-216-813-11 METAL CHIP 1/16W R802 1-216-833-11 METAL CHIP 1/16W < VARIABLE RESISTOR >...
  • Page 64 HCD-GS200 T.SENSOR 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 1-684-159-11 T.SENSOR BOARD 1-769-944-11 WIRE (FLAT TYPE) (11 CORE) 0 108 ************** 1-757-933-11 CORD, POWER < PHOTO INTERRUPTER > 0 602...
  • Page 65 HCD-GS200 3 7 63 1515 0 MEMO L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 66 HCD-GS200 3 7 63 1515 0 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page.

Table of Contents