Configuring Server Groups - Cisco MDS 9000 Series Configuration Manual
Security
Hide thumbs
Also See for MDS 9000 Series:
- Command reference manual (1464 pages) ,
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages)
Table of Contents
Advertisement
Configuring Security Features on an External AAA Server
Displays All AAA Server Groups
switch# show aaa groups
radius
TacServer
Displays TACACS+ Server Statistics
switch# show tacacs-server statistics 10.1.2.3
Server is not monitored
Authentication Statistics
Authorization Statistics
Accounting Statistics
Clearing TACACS+ Server Statistics
You can clear all the TACACS+ server statistics using the clear tacacs-server statistics 10.1.2.3 command.
Configuring Server Groups
You can specify one or more remote AAA servers to authenticate users using server groups. All members of
a group must belong to the same protocol, either RADIUS or TACACS+. The servers are tried in the same
order in which you configure them.
The AAA server monitoring feature can mark an AAA server as dead. You can configure a period of time in
minutes to elapse before the switch sends requests to a dead AAA server. (See the
on page 34
This section includes the following topics:
server ServerA on port 49
server ServerB on port 49:
failed transactions: 0
successful transactions: 0
requests sent: 0
requests timed out: 0
responses with no matching requests: 0
responses not processed: 0
responses containing errors: 0
failed transactions: 0
sucessfull transactions: 0
requests sent: 0
requests timed out: 0
responses with no matching requests: 0
responses not processed: 0
responses containing errors: 0
failed transactions: 0
successful transactions: 0
requests sent: 0
requests timed out: 0
responses with no matching requests: 0
responses not processed: 0
responses containing errors: 0
section).
Cisco MDS 9000 Series Security Configuration Guide, Release 8.x
Clearing TACACS+ Server Statistics
AAA Server Monitoring,
79
Advertisement
Chapters
Table of Contents
