Gerätebeschreibung Appliance Description A Scheibenmesser gezahnt (Rundmesser) A Toothed Cutting Disc (Circular Blade) B Messerverschluß mit Linksdrehung B Blade Lock with Left-Hand Thread C Schneidgutschlitten mit Fingerschutz C Slide with Finger Protection D Restguthalter D Holder Anschlagplatte Stop Plate Schneidetisch mit Schlittenführungsrille Slicing Table with Guide Slot for the Slide G Typenschild (Geräteunterseite) G Rating Plate (on the underside of the...
• Prior to cleaning and before changing Dear Customer, the blade, put the stop plate in the „0” position and unplug the appliance Please read these operating instruc- from the mains. tions carefully. Above all please observe the safety instructions on the •...
Positioning the Appliance Please Note: The circular blade contin- ues to rotate for a short time after the The Universal Slicer, with its non-slip appliance is switched off. feet, will stand securely without slip- After each use, please return the stop ping on level, clean, dry work surfaces.
Page 7
Dismantling the Appliance Disposal (Fig. 9/10) Packaging material Remove the circular blade as described The packaging materials are environ- above. To remove the slicing table, fold mentally friendly and can be recycled. it up and pull it out of the housing at The plastic components are identified the lower end at the rear (Fig.