Table of Contents
Advertisement
On image data compatibility
Image data files recorded on "Memory Stick
PRO Duo" media by your camcorder conform
to the "Design rule for Camera File system"
universal standard established by the JEITA
(Japan Electronics and Information Technology
Industories Association).
On your camcorder, you cannot play back
photos recorded on other devices (DCR-
TRV900E or DSC-D700/D770) that do not
conform to the universal standard. (These
models are not sold in some regions.)
If you cannot use "Memory Stick PRO Duo"
media that have been used with another device,
format "Memory Stick PRO Duo" media with
your camcorder (p. 71). Note that formatting
erases all information on the "Memory Stick
PRO Duo" media.
You may not be able to play back images with
your camcorder:
When playing back image data modified on
your computer
When playing back image data recorded with
other devices
About the "InfoLITHIUM" battery
pack
Your camcorder operates only with an
"InfoLITHIUM" battery pack (H series).
"InfoLITHIUM" H series battery packs
have the
mark.
What is an "InfoLITHIUM" battery pack?
An "InfoLITHIUM" battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your camcorder
and an AC Adaptor/charger (sold separately).
The "InfoLITHIUM" battery pack calculates the
power consumption according to the operating
conditions of your camcorder, and displays the
remaining battery time in minutes.
To charge the battery pack
Be sure to charge the battery pack before you
start using your camcorder.
We recommend charging the battery pack in an
ambient temperature of between 10
(50
F to 86
F) until the charge lamp turns
off. If you charge the battery pack outside of
this temperature range, you may not be able to
charge it efficiently.
To use the battery pack effectively
Battery pack performance decreases when the
ambient temperature is 10
and the length of time you can use the battery
pack becomes shorter. In that case, do one
of the following to use the battery pack for a
longer time.
Put the battery pack in a pocket to warm it
up, and install it on your camcorder right
before you start taking shots.
Use a large capacity battery pack: NP-FH70/
FH100 (sold separately).
Frequent use of the LCD screen or a frequent
playback, fast forward or reverse operation
wears out the battery pack faster. We
recommend using a large capacity battery pack:
NP-FH70/FH100 (sold separately).
Be sure to close the LCD screen when not
recording or playing back on your camcorder.
The battery pack is also consumed when your
camcorder is in recording standby or playback
pause.
Have spare battery packs ready for 2 or 3 times
the expected recording time, and make trial
recordings before making the actual recording.
Do not expose the battery pack to water. The
battery pack is not water resistant.
About the remaining battery time
indicator
When the power goes off even though the
remaining battery time indicator indicates that
the battery pack has enough power to operate,
charge the battery pack fully again. Remaining
battery time will be indicated correctly. Note,
however, that the battery indication will not be
restored if it is used in high temperatures for
a long time, or if left in a fully charged state,
or when the battery pack is frequently used.
Use the remaining battery time indication as a
rough guide only.
The mark that indicates low battery flashes
even if there are still 20 minutes of battery
time remaining, depending on the operating
conditions or ambient temperature.
C to 30
C
17
C (50
F) or below,
Hide quick links:
Advertisement
Chapters
Table of Contents
