Dab; Overview Of Dab; Basic Operations Of Dab - Sony XR-M500R Operating Instructions Manual
Fm/mw/lw cassette car stereo
Hide thumbs
Also See for XR-M500R:
- Operating instructions manual (212 pages) ,
- Service manual (66 pages) ,
- Installation/connections (2 pages)
Table of Contents
Advertisement
Available languages
Available languages
With Optional Equipment
DAB
Overview of DAB
DAB (Digital Audio Broadcasting) is a new
multimedia broadcasting system that transmits
audio programmes with a quality comparable
to that of CDs. This is made possible by the use
of a microcomputer in the DAB tuner which
uses the radio signals sent from multiple
aerials and multi-path signals (reflected radio
waves) to boost the strength of the main signal.
This makes DAB almost immune to radio
interference even in a moving object such as a
car.
Each DAB station bundles radio programmes
(services) into an ensemble which it then
broadcasts. Each service contains one or more
components. All ensembles, services, and
components are identified by name, so you can
access any of them without having to know
their frequencies.
DAB programme
Notes
• The DAB system is actually in a testing phase.
This means some services have not been
sufficiently defined or are presently being tested.
At present, such services are not supported by
the optional DAB tuner unit XT-100DAB.
• DAB programmes are broadcast in Band-III (174
to 240 MHz) and L-Band (1,452 to 1,492 MHz),
with each band divided into channels (41 in
Band-III and 23 in L-Band). One ensemble is
broadcast per channel by each DAB station.
• When you change the mode from FM3 to DAB,
all the AF TA modes stay active.
• When you change any of the AF TA modes in
DAB, that mode stays active in FM1.
32
Ensemble
Service
Service
Service
Component
Component
Component
Basic operations of DAB
Searching for the Ensemble and
Service
— Automatic Tuning
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select
"DAB."
3
Press and hold < or , until "Seek +" or
"Seek –" appears.
4
Press < or , to search the desired
service.
Note
The "
" indication flashes while the unit is
searching for the Ensemble.
Selecting the Ensemble
— Manual Tuning
If you know the channel number of Ensemble,
follow the procedure below to tune in.
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select
"DAB."
3
Press M or m until "Ch. XXX" appears.
4
Press M or m repeatedly until the desired
channel number appears.
Tips
• More than one channel may broadcast the same
Ensemble.
• If you select the Ensemble service but cannot
receive it, the "
" indication flashes.
- Quick Links:
- Resetting the Unit
Hide quick links:
Advertisement
Chapters
Table of Contents
