Supplementary Conditions - Siemens SINUMERIK 802D sl Function Manual
Turning, milling, nibbling
Hide thumbs
Also See for SINUMERIK 802D sl:
- Programming and operating manual (364 pages) ,
- Instruction manual (262 pages) ,
- Programming manual (251 pages)
Table of Contents
Advertisement
Remedy
● Reset
● Check the working area limit in the part program (G25/G26) or in the setting data.
● Move in the opposite direction (in JOG mode)
2.5
Supplementary conditions
To ensure that the monitoring functions respond correctly, it is important that the correct
values are entered in the following machine data:
General:
● MD31030 LEADSCREW_PITCH (leadscrew pitch)
● Gear ratio (load gearbox):
● MD32810 EQUIV_SPEEDCTRL_TIME
● Encoder resolution
The associated machine data are described in Chapter "Velocities, Setpoint/Actual Value
Systems, Closed-Loop Control (G2)"
For analog spindle only:
● Output voltage / output speed relation
Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0
MD31050 DRIVE_AX_RATIO_DENOM (load gearbox denominator)
MD31060 DRIVE_AX_RATIO_NUMERA (load gearbox numerator)
Gear ratio (encoder), possibly for spindle:
MD31070 DRIVE_ENC_RATIO_DENOM (measuring gearbox denominator)
MD31080 DRIVE_ENC_RATIO_NUMERA (measuring gearbox numerator)
(Equivalent time constant speed control loop for feedforward control)
MD31020 ENC_RESOL[0] (encoder pulses per revolution)
MD32260 RATED_VELO (rated motor speed)
MD32250 RATED_OUTVAL (rated output voltage)
Axis Monitoring (A3)
2.5 Supplementary conditions
55
- Quick Links:
- Signals from Plc to Nck
Hide quick links:
Advertisement
Table of Contents
