Caution: 1. During repair or tests, minimum distance of 13cm from the focus lens must be kept. 2. During repair or tests, do not view laser beam for 10 seconds or longer. u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 3
To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be u163 installed before shipment. Please be sure to follow this method especially if it is specified in this manual. AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
10.11 WAVEFORMS ............................ 162 11. PCB CONNECTION DIAGRAM........................164 11.1 AV UNIT ............................... 164 11.2 KEYBOARD UNIT ..........................168 11.3 DVD CORE UNIT ..........................170 11.4 COMPOUND UNIT(A) AND COMPOUND UNIT(B)................174 u163 12. ELECTRICAL PARTS LIST ........................175 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
DVD Format/Logo Licensing Corporation. u163 The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Pioneer Corporation is under license. Other trademarks and trade names are those of their respective owners. AVIC-F90BT/XS/UC...
Compared with eutectic solders, lead-free solders have higher bond strengths but slower wetting times and higher melting temperatures (hard to melt/easy to harden). The following lead-free solders are available as service parts: Parts numbers of lead-free solder: GYP1006 1.0 in dia. GYP1007 0.6 in dia. GYP1008 0.3 in dia. L 13942296513 u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
See the table below for the items to be checked regarding video and audio: Item to be checked regarding video Item to be checked regarding audio Disturbed image (video jumpiness) Volume too high Mottled color u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
3.2 PCB LOCATIONS 3 7 63 1515 0 Keyboard Unit AV Unit DVD Core Unit L 13942296513 Compound Unit(B) Compound Unit(A) Unit Number CWN3648(A:AVIC-F90BT/XS/UC) Unit Number CWN3171(B:AVIC-F900BT/XS/UC) Unit Number CWN3177(C:AVIC-F900BT/XS/AU) Unit Name AV Unit Unit Number Unit Name Keyboard Unit...
- Grease List Name Jig No. Remarks Grease GEM1024 DVD Mechanism Module Grease GEM1043 DVD Mechanism Module Grease GEM1045 DVD Mechanism Module Grease GEM1050 DVD Mechanism Module Locking agents 1401M DVD Mechanism Module (1401M:produced by THREE BOND) u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools: Portions to be cleaned Cleaning tools DVD pickup lenses Cleaning liquid : GEM1004 Cleaning paper : GED-008 Portions to be cleaned Cleaning tools Fans Cleaning paper : GED-008 L 13942296513 u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Arrange Reverse Signal Input to CPLD(NAV An Answer of Power off Waveform Reverse Signal Acc/Bup/ILM Sense Control Signal Power Supply CONN VCC 5 V DC/DC Switch Speed Pulse Input Speed Pulse Speed Pulse CONN u163 Digital Out CONN AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 23
Front Panel posite In (2) Key Pad Volume Controller Board Buttons (EW only) 1. Eject 2. Menu 3. Map 4. Mute AuX-in T(2) BT Antenna t Signal Watchdog wer off to CPLD(NAVI BD) rse Signal d Pulse u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
VT8(8 V) Tuner Front step amplifier BA00CC0WFP FM/AM Tuner DCSKIPCD Front step amplifier 25.4 mA FM/AM TUNER 172 mA typ 172 mA BA00CC0WFP UNIT max 200 mA X-2026 SYSPW or typ 103 mA SWACPW max 140 mA u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 33
OR MUTE CIRCUIT 3 -> 5AND IPD T08T TC74VHCT08T TC74VHCT32T TC7WH32FU TC74SH04 TC7S32FU TC7SET08FU 2 mA 2 mA 2 mA 2 mA 2 mA 2 mA LED DRIVER AV SELECTOR TEMPERATURE CIRCUIT 43&UMX1N 3 mA 08FT L 13942296513 mplifier u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 34
3 7 63 1515 0 HIVOL HIVOL 12 V 9.5 V HIVOL 18 V SYSPW AVIC-F90BT/XS/UC 181.1 mA 326.7 mA 121.6 mA AV8(8.3 V) BA00CCOWCP SYSPWR or 24 mA SWACPW VIDEO ISOLATOR typ 19 mA VIDEO 5 V NJM2505F max 29.0 mA...
Page 35
8.4 mA 1 mA CAPTAIN6 DVD LPF 37 mA NJM2125 NJM4558V 10.5 mA 50 mA 9 mA GUIDE MIX AV SELECTOR VIDEO BUFFER NJM2060V AN15887A MUTE CIRCUIT VIDEO LEVELSHIFT L 13942296513 PKB SNS SYS->NAVI TC74VHCT08FTS1 KEY BORD u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
L 13942296513 DCSKIPCD ANTON POWER SUPPLY ANTON (Source interlocking CONTROL movement, forced OFF) SWACPW DCSKIP BSENSN RSTOUT NAVI CONTROL BATFAULT CPUWDT OFFINFO OFFANS NAVI POWER NAVICON u163 SUPPLY (At the time of a reset start) CONTROL FANCONT FAN CONTROL AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 37
After mute (300 ms) (After SYSPWR ON, at least 300 ms. MUTE time is extended to OFFANS Low henceforth.) 8 ms to 16 ms or more R SUPPLY MASK(200 ms) L 13942296513 16 ms u163 FANCONT(At the time of high temperature) AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Is it OK? cleaned? cleaning Replace the PICK UP Check point: Error rate check Error rate check PICK UP Perform lens Is it OK? cleaned? cleaning Replace the PICK UP Ckeck parts Finished other than PICK UP u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 39
Status: [Foucs closed] of TEST MODE Mode: CD L 13942296513 Disc Check Point Threshold Remarks: LD current TCD-782 CDLD1 – VCC5_3 (mV) 10 – 60(mA) CDLD1 VCC5_3 Notes: Please pay attention to the laser diode damage by static electricity. u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 40
Watch carefully the value of ASMAX. Error rate check L 13942296513 Status: [Tracking Closed] of TEST MODE Disc Check Point Threshold Remarks: less than GGV1025 ID: 40000 1.000E-03 less than GGV1025 ID: 200000 1.000E-03 less than TCD-782 ID: HOME Position 2.500E-03 u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
L 13942296513 Execute check 10. Go to FE section check. Repair the defective part. Go to FE section check. Normal? FE section check. Go to FE related Is FE section repair process. normal? Replace the unit. Normal? u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 42
<Check> Check the voltage at the “STANBY” test point while the power is on. Use the “DGND1” test point at the reference. Specification value Check point Module No. Unit STANBY-DGND1 VCC33 V- 0.6 V or more Side A DGND1 STANBY L 13942296513 Fig 1.1: STANBY check point u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 43
Module No. Unit VDD5_3 - DGND1 5.0 ± 0.4 VCC33_3 - DGND1 3.3 ± 0.15 VCC12_1 - DGND1 1.2 ± 0.12 Side A L 13942296513 VDD5_3 VCC33 DGND1 VCC12_1 Fig 2.2: VDD5, VCC33, VCC12 voltage check points u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 44
<Check> Check the voltage at the “XRES” test point while the power is on. Use the “DGND1” test point at the reference. Check point Module No. Specification value Unit 1 XRES-DGND1 VCC33 × 0.7 or more Side A DGND1 XRES L 13942296513 Fig 3.1: RESET check point u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 45
<Check> Check the voltage at the “VSENS” test point while the power is on. Use the “DGND1” test point at the reference. Specification value Check point Module No. Unit VSENS - DGND1 VCC33 × 0.7 or more Side A L 13942296513 DGND1 VSENS Fig 4.2: VSENS check point u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 46
Check point Module No. Specification value Unit 27 MHz 2 IC1501 169pin ± 50 ppm L 13942296513 Specification value Fig 5.2: Clock specification value Side A DGND1 IC1501 169pin u163 Fig 5.3: 27 MHz check point AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 47
Be careful as XCSM, XWE, XCAS, XRAS and XSCM of IC1481 are called differently in IC1501, namely NCSM, NWE, NCAS, NRAS, NCSM. IC1501 MA0~11 1481 DVD-LSI MDQ0~31 SDRAM XWE (NWE) XCAS (NCAS) XRAS (NRAS) XCSM (NCSM) DQM0 DQM1 DQM2 DQM3 Fig 6.1: SDRAM I/F L 13942296513 u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 49
3 7 63 1515 0 Side B Check point 1 (IC1481) Side A L 13942296513 Check point 2 (IC1501) Fig 6.2: SDRAM I/F check point u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 50
Module No. Specification value Unit VD8_1 - PGND3 8.0 ± 0.4 VD - PGND3 8.0 ± 0.4 VCC5_1- AGND1 5.0 ± 0.1 Side A VD8_1 AGND1 L 13942296513 PGND3 VCC5_1 Fig 7.2: VD8, VCC5 voltage check points u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 51
Check with PGND and GNDAU being the reference. Check point Module No. Specification value Unit VD - PGND_3 8.0 ± 0.4 AVCC5 - GNDAU1 5.0 ± 0.1 Side A PGND3 GNDAU L 13942296513 AVCC5 Fig 8.2: VD8, AVCC5 voltage check points u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 52
33.868 8 MHz ± 300 ppm Specification value 1 Specification Specification value 2 L 13942296513 value 3 Fig 9.2: Clock specification value Side A u163 Check point 2 (IC1501 172 pin) Check point 1 (stylus) Fig 9.3: 27 MHz, DACCLK check point AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 53
VCC33 V-0.6 V or higher 0.4 V or lower Waveform 3 L 13942296513 Specification value 2 Specification value 1 Fig 10.2: Serial 3 lines specification value Side A SRCK LRCK ADOUT3 u163 Fig 10.3: Serial 3 lines check points AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 54
Waveform 4 1 400 ± 150 mV Waveform 4 Specification value is the root-mean-square value (rms). Fig 10.4: Analog audio out (LO, RO) specification value. Side A GNDAU1 L 13942296513 Fig 10.5: Analog audio out check point u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 55
Specification value 2 Check point 1 (stylus) Specification value 1 Reference waveform 6 IEC VCC33 V-0.6 V or higher 0.4 V or lower Waveform 5 Side A L 13942296513 Fig 10.6: Digital audio signal (IECOUT) check point u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 56
AD3/DATA ADOUT3 DATA IEC/IPFLG IPFLG SBCK SBCK BMUTE BMUTE MCKENA High RIPP High EMPH EMPH EMPH Pins 1, 6, 8, 10, 12, 14, 16, 18, 20, 22 and 24 are GNDD. Fig 10.7: 6ch digital out/Ripping circuit u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 57
0.4 V or lower SBCK VCC33 V-0.6 V or higher 0.4 V or lower RIPP VCC33 V x 0.3 V or lower L 13942296513 Specification value 1 Specification value 2 Fig 10.8: 6ch digital out/Ripping specification value u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 58
3 7 63 1515 0 Side A SRCK LRCK ADOUT3 Side B L 13942296513 ADOUT2 ADOUT1 ADOUT0 RIPP MCKENA SBCK Fig 10.9: 6ch digital out/Ripping check point u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 59
Turn the volume (VR1671) to adjust the video level within the range of 1.0 ± 0.02 Vpp. The adjustment specification is 1.0 ± 0.02 Vpp. CN1901 AVCC5 HOST I/F IC1501 Q1701(NoMount) Video buffer circuit Video Q1702(NoMount) Video buffer circuit section Q1704(NoMount) Video buffer circuit Fig 11.3: Video circuit (component) u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 60
Cb signal Specification value BOTTOM PEAK Cr signal Specification value L 13942296513 BOTTOM 100% Color Bars signal Fig 11.4 Waveform for the case of component 100% Color Bars output Side A COMPO u163 Fig 11.5: VIDEO signal check point AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 61
(Refer to the FE test mode for the method of displaying the LD energizing time.) 2.If the second digit from the left of the energizing time display is showing E, such as “ E ”, it means that the flash memory has reached its life. Example: 0E000BB8 L 13942296513 u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
*6 Notice as an error status will not be given *7 CPRM(Content Protection for Recordable Media) : A copyright protection technique for digital contents used for re-writable DVD or memory card. (DVD-VR model only) AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
- Connector of AV unit: 3 V L 13942296513 seconds. Power supply LCD backlight is OK? LCD unit failure. block for "LCD Panel unit" is OK? No Display (White or Gray screen) NAVI unit failure. LCD Panel unit failure. u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 66
Pin10 Pin1: TFT_ANODE Power supply Pin36: LVDSN Video signal (LVDS) from NAVI to LCD BD. Pin2: TFT_ANODE2 from LCD BD to u163 Pin37: LVDSP Video signal (LVDS) from NAVI to LCD BD. Pin6: TFT_CATHODE LCD unit Pin7: TFT_CATHODE AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 67
KEY (Rotary) signal from KEY BD to LCD BD (Pulse waveform) Pin33: ROT0 KEY (Rotary) signal from KEY BD to LCD BD (Pulse waveform) Pin34: ROT1 KEY (Rotary) signal from KEY BD to LCD BD (Pulse waveform) u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 68
3 7 63 1515 0 Case 5 Audio (NAVI SOURCE) or Guide voice (BEEP sound) is NG. Pin19: GUI_P Guidance or BEEP sound Pin28: NAVI L Audio Lch Pin30: NAVI R Audio Rch Pin29,31: GND L 13942296513 u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
3. Insert the SD card into the main unit. 4. Turn ACC ON. 5. The test mode menu is displayed. << Enter the test mode in the set procedure. >> Start screen When the set procedure is followed (Procedure OK) L 13942296513 u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 70
Not for service DTV Test Not for service SD Test SD card test EQ Flat/Vo Not for service RGB Illumin Not for service BT Test Not for service Screen Not for service BAK CTL Adjustment of the LCD backlight u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 72
2. When Valid Position is green, the measurement is successfully conducted. Signal u163 << Operation method >> 1. The screen will be in this state if the test is not started. 2. To start the test, press ‘hot’. AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 73
1. When the test starts and a satellite is started to be acquired, the screen will be in this state. Not acquired. Yellow Already acquired. Green Acquired and data obtained. • • • • • • • • • AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 74
Conduct a read test to NAND Flash disc. Notes) It will take time by test completion. Delete Files Conduct a deletion test to NAND Flash disc. Format disc Conduct a formatting test to NAND Flash disc. Notes) Only the test area of the Flash disc will be formatted. AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 75
The test can be terminated by tapping the left ‘x’ mark. Graphics Test start screen Start screen L 13942296513 << Operation method >> 1. The screen will be in this state after started. 2. Press ‘Test’ to start the test. u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 76
3 7 63 1515 0 << Operation method >> 1. The menu appears when ‘Test’ is pressed. Select the item to test. << Operation method >> 1. To terminate the test, press ‘File’ and then ‘Exit’. L 13942296513 u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 78
Touch panel calibration can be conducted by tapping five ‘+’ marks. Touch Panel Test L 13942296513 << Key operation >> A line appears when a line is drawn by a finger on the touch panel. The test can be terminated by pressing the top right ‘x’ mark. u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 79
Clear the display. • • • [High] Not for service • • • [Low] Not for service • • • L 13942296513 SD Card Test screen Start screen << Key operation >> [Start] Start the test. • • • u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 80
Notes) No operation can be conducted after this operation. Make a recovery by turning ACC OFF ON. [Backlight on] The backlight turns on. • • • [Set] The brightness of the backlight can be changed. • • • u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 81
<< Key operation >> 3. When the keyboard appears, tap the edit box again to make it active. Then input by keyboard becomes possible. Enter a desired number and tap ‘Set’ to change the brightness of the backlight. u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
(3) is pressed long The test mode is released by ACC-OFF operation SlaveTestMode DVD(CD) region display DVD(CD) debug display DVD(CD) touch direct display Back L 13942296513 Shift to selected test mode. u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 83
In order to F close after focus search (S character measurement mode), set to Power_OFF first then power on again FEMIN level before F close. ASMAX level ENVMAX level FE normalization coefficient Spindle gain coefficient TEMAX level indication TEMIN level indication u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 84
Designation of digit by command (1) and (2). UP/DOWN of numbers by command (3) and (4). Fix by command (5). Error occurrence at Power_OFF [Note] If an error occurs at Power_OFF, reset cannot be made. In such a case, it is necessary to turn the power off and start the test mode once again. Error display u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 85
[Note] If the power on time is 999999 hours or more, it is always reported as 999999 hours. [Note] If the power on time is “*E** ****”, the value may not be correct due to the life of the flash memory. AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Image Region Checksum = 0x64463447 u163 Read Progress : 31% CE Upgrade OK Please restart your device!! <WINCE Upgrade Menu:Progress Screen> <WINCE Upgrade Menu:Finish Screen> 4. After the menu of “WINCE Upgrade” show “CE Upgrade OK”, restart the device. AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
1. This screen appears when the Test Disc is activated. 2. Tap ‘E-MIC’ to start the test. u163 << Operation method >> 1. This screen appears when the test is started. 2. Put a sound into the microphone while this screen is shown. The sound is recorded. AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 88
1. When this screen appears, the recorded sound is played ‘quietly’. Notes) The sound volume cannot be adjusted. u163 << Operation method >> 1. When this screen appears, the recorded sound is muted. Notes) The sound volume cannot be adjusted. AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 89
1. This screen appears when the Test Disc is activated. If you tap "GPS_TTFF", the test is started. u163 << Operation method >> 1. When the test is started, this screen is displayed. When you terminate the test in the way, tap the "Exit". AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 90
If you go to next step, tap "OK". Version Check L 13942296513 << Operation method >> 1. This screen appears when the Test Disc is activated. 2. When ‘Version’ is tapped, the test starts. If the "Reality" corresponds to "Plan", the result becomes "OK". u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 91
"Reality" is each version on actual machine and the "Plan" is the version information described in "Information.txt" of SD card. L 13942296513 << Operation method >> If the test result is "NG", the red screen is displayed. u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 92
2. If you tap the "Restore", the user data is deleted. u163 << Operation method >> If the deletion is terminated, this screen is displayed. Notes:) "Splash screen setting" is not back to default after performing this function. Please set the "Splash screen setting", before performing this function. AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Note) To remove the screws, use jig No. GGK1068. Fig.1 Removing the DVD Mechanism Module (Fig.2) Remove the four screws. Disconnect the two connectors and then remove the DVD Mechanism Module. L 13942296513 DVD Mechanism Module Fig.2 u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 94
Monitor Assy. (Right side) Monitor Assy (Left side) L 13942296513 (Top side) Fig.3 Monitor Assy Removing the Navi Unit (Fig.4) Navi Unit Remove the five screws. Disconnect the four connectors and then remove the Navi Unit. u163 Fig.4 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 95
Chassis(Upper). (Right side) Chassis(upper) L 13942296513 Remove the FFC(CDE8551). (Left side) Remove the cord assy(CDE8393). AV Unit Remove the cord assy(CDH1381). Remove the screw. Remove the six screws and then remove the AV Unit. u163 Fig.5 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 96
Removing the Keyboard Unit (Fig.7) L 13942296513 LCD Module Assy Remove the four screws. Release the five latches and then remove the LCD Module Assy. Keyboard Unit Remove the four screws and then remove the Keyboard Unit. u163 Fig.7 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 97
7. Disconnect the connector of the 8-12 detection flexible PCB from the PCB. Fig 2 Module PCB Short Connector Connector (8-12 detection flexible) (pick up flexible) u163 Solder land (load motor, lead wire of the clamp SW.) Connector (SPDL flexible) Fig 3 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 98
Furthermore, make sure to hang the main shaft holding spring permanently. Holding plate spring Main shaft PU unit Main shaft holding spring Sub shaft Fig 5 CRG chassis temporary hanging section u163 Temporary hanging Permanent hanging AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 99
Demount LCD PANEL ASSY by extending snap fits on the grille side. Snap fit 2 place Do not bend CND4319 Do not bend CND4319 Remove snap fits by extending them on the grille side using u163 tweezers or bamboo tweezers. AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 100
• The code assy connecting 1F AV UNIT and 2F NAVI UNIT (CDE8393) shall be fitted on the back side of the choke coil (CTH1347) after 1F Chassis Unit and 2F Chassis Unit are fixed, as shown below. CDE8393 u163 CTH1347 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 101
CSX1135 shaft of an encoder CXC8994 • Since two case (CNB3472) fixing screws are ‘TORX tamper’ (tamper-proof screws with a projection in TORX), a special tool is required. TORX screwdriver(T8) : GGK1068 Mark 1 (T8 size) L 13942296513 M2.6 thread u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Attention) surement device should be set to floating ground. Test mode stopping procedure Reset or ACC OFF-ON. L 13942296513 u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 103
Symptom in case the adjustment is not adequate: Worsening of the error rate 10 (Normally 10 or less.) Large RF jitter RF waveform distortion Tracking drawing/Unstable servo u163 * Caution: Do not look into the laser light during adjustment. AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 104
AGND2 Oscilloscope u163 In case of method 2: There is no need for setting equipment. Please go on to step 3. 3. Turn on the power in the test mode, and load the adjustment disc (GGV1025). AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 105
At the middle periphery of pickup, turn the skew adjustment screw A slightly again and set the level to the maximum. (Adjustments should be performed in the order of A, B, A, and please make sure each adjustment is completed as the screws turned to the right.) u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 106
Cross section of R-SKEW adhesive locations. * Caution: Make a cross link to both the resin section and the sheet metal section. Adhesive application locations * Caution: Make a cross link to both the case section and the sheet metal section. u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 107
* Caution: Do not touch the shaded section in the drawing below. RF level adjustment section L 13942296513 Do not touch the optical parts. Do not touch the springs. Hologram (be careful for the static electricity) GRT adjustment section u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
8.2 AV UNIT ADJUSTMENT 3 7 63 1515 0 - Adjustment point AV UNIT(SIDE A) VR4231 L 13942296513 AV UNIT(SIDE B) V1VG(GND) AV CONNECTOR CN1016 u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Screw adjacent to mark on the product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions,apply as you think it appropriate.) 9.1 PACKING L 13942296513 u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 113
29-6 Caution Card See Contrast table(2) Connector CKX1049 Attachment Assy CEA4636 CNV8969 CD-ROM See Contrast table(2) (2) CONTRAST TABLE AVIC-F90BT/XS/UC, AVIC-F900BT/XS/UC and AVIC-F900BT/XS/AU are constructed the same except for the fol- lowing: Mark Description AVIC-F90BT/XS/UC AVIC-F900BT/XS/UC AVIC-F900BT/XS/AU Polyethylene Bag CEG1402 CEG1402...
Page 115
CKN1049 Gasket CNN2724 Connector(CN803) CKS5749 Connector(CN801) CKS5862 Insulator CNN2725 Antenna(ANT801) CTX1095 (2) CONTRAST TABLE AVIC-F90BT/XS/UC, AVIC-F900BT/XS/UC and AVIC-F900BT/XS/AU are constructed the same except for the fol- L 13942296513 lowing: Mark Description AVIC-F90BT/XS/UC AVIC-F900BT/XS/UC AVIC-F900BT/XS/AU Grille Unit CXC9777 CXC8984 CXC8986 u163 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
9.3 EXTERIOR(2) 3 7 63 1515 0 L 13942296513 u163 (A) GYH1031(Mylay tape) * Hold the flexible cable to the shield on the Navi Unit. AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 117
CXM1320 Cord Assy CDH1381 Chassis CNA3041 Gasket CNN2529 Chassis CNA3043 Bracket CND3698 (2) CONTRAST TABLE AVIC-F90BT/XS/UC, AVIC-F900BT/XS/UC and AVIC-F900BT/XS/AU are constructed the same except for the fol- lowing: Mark Description AVIC-F90BT/XS/UC AVIC-F900BT/XS/UC AVIC-F900BT/XS/AU Navi Unit(U1) CWX3642 CWX3642 CWX3648 L 13942296513...
Page 119
CND3004 Cord CDE6825 Holder CND3181 CNS1472 Resistor RS1/2PMF102J Holder CND3693 Holder CND3695 (2) CONTRAST TABLE AVIC-F90BT/XS/UC, AVIC-F900BT/XS/UC and AVIC-F900BT/XS/AU are constructed the same except for the fol- lowing: Mark Description AVIC-F90BT/XS/UC AVIC-F900BT/XS/UC AVIC-F900BT/XS/AU AV Unit CWN3648 CWN3171 CWN3177 Connector(CN1021) CKS3408...
10.8 DVD CORE UNIT(1/2)(GUIDE PAGE) 3 7 63 1515 0 RF SIGNAL FOCUS SERVO LINE TRACKING SERVO LINE CARRIAGE SERVO LINE SPINDLE SERVO LINE L 13942296513 u163 CWW1465 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 153
3 7 63 1515 0 DVD CORE UNIT(1/2) L 13942296513 M2,M3 u163 CWW1466 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
The expression of the unit in this manual is shown by u instead of µ. Please do not make a mistake. Circuit Symbol and No. Part No. Circuit Symbol and No. Part No. IC 1007 (A,88,128) IC PAL007C Unit Number : CWN3648(A:AVIC-F90BT/XS/UC) IC 1008 (A,56,38) IC NJM2125F Unit Number : CWN3171(B:AVIC-F900BT/XS/UC) IC 1015 (A,64,47) IC NJM4558V...
Page 176
(B,113,107) Diode DAN202U D 4735 (B,148,93) Diode RB500V-40 D 2870 (A,153,106) Diode UDZS5R1(B) D 4736 (B,141,96) Diode RB500V-40 D 2871 (B,169,130) Diode UDZS18(B) D 4737 (B,141,95) Diode HZU7R5(B3) D 2872 (B,169,126) Diode UDZS18(B) D 4751 (A,29,13) Diode 1SS355 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 177
CTF1334 R 610 (B,95,37) RS1/16SS102J L 4372 (B,40,123) Inductor CTF1334 R 612 (B,97,31) RS1/16SS104J L 4601 (A,106,63) Choke Coil 27 uH CTH1402 R 613 (A,94,41) RS1/16SS471J R 614 (A,93,41) RS1/16SS471J L 4602 (A,129,63) Choke Coil 10 uH CTH1403 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 178
(B,109,48) RS1/16SS104J R 2850 (B,152,9) RS1/16SS202J R 714 (A,95,76) RS1/10S0R0J R 2851 (B,151,9) RS1/16SS822J R 715 (B,95,74) RS1/10S0R0J R 2852 (A,153,10) RS1/16SS203J R 717 (A,81,57) RS1/16SS0R0J R 2853 (A,152,12) RS1/16SS333J R 718 (A,93,63) RS1/16SS221J R 2860 (B,125,107) RS1/16SS391J AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 179
(B,74,8) RS1/16SS0R0J R 4153 (B,66,33) RS1/16SS103J R 2962 (A,77,17) RS1/16SS0R0J R 4154 (B,65,32) RS1/16SS103J R 2963 (A,78,17) RS1/16SS0R0J R 4155 (B,68,35) RS1/16SS102J R 2964 (A,80,21) RS1/16SS0R0J R 4156 (B,69,36) RS1/16SS104J R 2967 (B,76,18) RS1/16SS0R0J R 4157 (B,72,34) RS1/16SS104J AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 180
R 4337 (B,104,92) RS1/16SS223J R 4338 (B,95,85) RS1/16SS223J R 4680 (B,142,46) RS1/16SS0R0J R 4339 (B,95,92) RS1/16SS223J R 4681 (B,163,56) (A) RS1/4SA272J R 4340 (B,100,92) RS1/16SS223J R 4682 (B,168,58) (A) RS1/4SA272J R 4341 (B,90,85) RS1/16SS223J R 4683 (B,161,59) (A) RS1/16S101J AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 181
C 2800 (B,94,103) CKSRYB102K50 C 2801 (A,158,98) 100 uF/16 V CCH1565 C 607 (B,94,45) CKSRYB153K50 C 2802 (A,163,99) CCSRCH102J50 C 608 (B,96,36) CKSSYB104K16 C 609 (B,96,33) CKSRYB104K16 C 2804 (A,163,101) CKSRYB104K50 C 613 (B,96,46) CKSRYB104K16 C 2805 (B,93,101) CKSRYB104K50 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 182
C 4063 (A,53,40) CKSRYB104K50 C 4222 (B,73,40) CKSRYB105K10 C 4070 (A,67,56) 10 uF CCG1203 C 4224 (B,57,46) CKSRYB105K10 C 4071 (A,68,49) 10 uF CCG1203 C 4231 (B,61,24) CKSRYB105K10 C 4072 (A,68,54) 10 uF CCG1203 C 4232 (A,63,26) CEVWNP220M10 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 183
C 4604 (B,111,61) CKSRYB473K50 C 4687 (A,166,76) (A) CEVW470M25 C 4605 (B,111,63) 33 pF CCG1252 C 4688 (B,161,72) (A) CKSRYB104K16 C 4606 (B,110,66) CKSRYB105K10 C 4701 (B,86,47) CKSYB105K16 C 4607 (B,123,69) 4.7 uF CCG1222 C 4702 (A,88,47) CKSRYB104K16 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 184
S 802 (A,11,80) Push Switch CSG1155 L 1511 (A,63,3) Inductor CTF1680 S 803 (A,18,51) Switch(ROTARY COMMANDER) CSX1135 L 1601 (A,41,23) Inductor CTF1473 S 804 (A,18,84) Push Switch CSG1155 L 1602 (A,55,42) Inductor CTF1473 S 805 (A,24,80) Push Switch CSG1155 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 185
(B,19,21) RS1/16SS3R9J R 1544 (A,57,41) RS1/16SS183J R 1234 (B,20,21) RS1/16SS3R9J R 1545 (A,61,36) RS1/16SS223J R 1240 (B,32,18) RS1/16SS3R9J R 1546 (A,59,42) RS1/16SS104J R 1241 (B,33,18) RS1/16SS3R9J R 1547 (A,59,41) RS1/16SS473J R 1242 (B,34,18) RS1/16SS3R9J R 1548 (A,59,36) RS1/16SS104J AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 186
(A,90,53) CCSSCH101J50 C 1501 (A,68,44) CKSQYB106K6R3 C 1028 (B,89,56) CKSRYB105K10 C 1502 (A,58,43) CKSQYB106K6R3 C 1029 (B,89,52) CKSQYB225K10 C 1503 (A,55,3) CKSSYB104K10 C 1030 (B,84,59) CKSQYB106K6R3 C 1504 (A,58,3) CKSSYB104K10 C 1031 (B,85,59) CKSQYB106K6R3 C 1505 (A,53,3) CKSSYB104K10 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 187
CKSSYB104K10 C 1623 (A,52,39) CKSSYB104K10 C 1624 (A,43,27) CKSSYB103K16 C 1625 (A,56,36) CKSSYB104K10 u163 C 1626 (A,41,31) CKSRYB105K10 C 1627 (A,43,23) CKSSYB104K10 C 1628 (A,54,36) CKSSYB104K10 C 1629 (A,49,36) CKSSYB104K10 C 1630 (A,38,30) CKSQYB106K6R3 C 1671 (A,43,18) CKSSYB104K10 AVIC-F90BT/XS/UC http://www.xiaoyu163.com...
Page 188
http://www.xiaoyu163.com Revision History 3 7 63 1515 0 Mark Date Rev. No. SM Correction No. Notes Page Changed SERVICE RANK for YBL5013. SCC09002 2009/08/20 Changed [4.2 BLOCK DIAGRAM]. 22,23 SCC09004 L 13942296513 u163 http://www.xiaoyu163.com...