Sony STR-DN1050 Service Manual page 11
Multi channel av receiver
Hide thumbs
Also See for STR-DN1050:
- Help manual (379 pages) ,
- Reference manual (116 pages) ,
- Updating the software (2 pages)
Table of Contents
Advertisement
NOTE OF REPLACING MB BOARD OR BLUETOOTH
MODULE OR RC-S801/A5 (WW) BOARD
When the MB board or BLUETOOTH module or RC-S801/A5
(WW) board are replaced, please execute the below service mode.
Pairing this system with a Bluetooth device
1. Press the [
] button to turn the power on.
\/1
2. Place the Bluetooth device within 1 meter (3 feet) from the
system.
3. Press BLUETOOTH on the unit to select Bluetooth function.
"BLUETOOTH" appears in the display panel.
4. Hold down BLUETOOTH on the unit for 2 seconds or more.
"PAIRING" and "BT" fl ashes in the display panel.
5. Perform the pairing procedure on the Bluetooth device.
6. Select the model number of the unit on the display of the
Bluetooth device.
For example, select "STR-DN1050". If passkey is required on
the Bluetooth device, enter "0000".
7. Perform the Bluetooth connection on the Bluetooth device.
8. When pairing is completed and the Bluetooth connection is
established, "BT" lights up in the display panel.
Depending on the Bluetooth device, connection may start
automatically after pairing is completed.
You can check the Bluetooth device address by pressing
DISPLAY repeatedly.
9. To cancel pairing operation, hold down BLUETOOTH on the
unit for 2 seconds or more until "CANCEL" appears in the
display panel.
Connecting with a smartphone by one touch (NFC)
Note: The operation in this mode must use a NFC-compatible smartphone
(Smartphones with a built-in NFC function [OS: Android 2.3.3 or
later, excluding Android 3.x])
1. Press the [
] button to turn the power on.
\/1
2. Download and install the app "NFC Easy Connect".
Download the free Android app from Google Play by searching
for "NFC Easy Connect".
You do not need to install the NFC Easy Connect application if
you are using an NFC compatible mobile device with Android
OS 4.1 or later installed.
3. Start the app "NFC Easy Connect" on the smartphone.
Make sure that the application screen is displayed.
4. Touch the smartphone to the N-Mark on the system until the
smartphone vibrates.
Complete the connection by following the instructions
displayed on the smartphone.
5. When pairing is completed and the Bluetooth connection is
established, the Bluetooth device name and "BT" appears in
the display panel.
Playing music from a Bluetooth device
For a Bluetooth device
1. Press the [
] button to turn the power on.
\/1
2. Press BLUETOOTH on the unit to select Bluetooth function.
"BLUETOOTH" appears in the display panel.
3. Establish connection with the Bluetooth device.
Press BLUETOOTH on the unit to connect to the last
connected Bluetooth device.
Perform the Bluetooth connection from the Bluetooth device if
the device is not connected.
Once the connection is established, the Bluetooth device name
and "BT" appears in the display panel.
4. Press N.
Depending on the Bluetooth device,
– you may have to press N twice.
– you may need to start playback of an audio source on the
Bluetooth device.
For an NFC-compatible smartphone
1. Press the [
] button to turn the power on.
\/1
Touch the smartphone to the N-Mark on the system to establish
the Bluetooth connection.
Start playback of an audio source on the smartphone. For
details on playback, refer to the operating instructions of your
smartphone.
To disconnect the Bluetooth device
For a Bluetooth device
Press BLUETOOTH on the unit.
"BLUETOOTH" appears in the display panel.
For an NFC-compatible smartphone
Touch the smartphone to the N-Mark on the system again.
To clear the memory of pairing registration information
perform ALL CLEAR INITIALIZE test mode (Refer page
17).
STR-DN1050
11
- Quick Links:
- Test Mode
- Troubleshooting
- Electrical Parts List
Hide quick links:
Advertisement
Table of Contents
