Com, Dp, Dvi/Vga, Ps/2 And Audio Cables; Multi-Monitoring - Siemens SIMATIC IPC847D Operating Instructions Manual
Hide thumbs
Also See for SIMATIC IPC847D:
- Product information (26 pages) ,
- Operating manual (54 pages) ,
- Operating instructions manual (40 pages)
Table of Contents
Advertisement
3.3.6.4
COM, DP, DVI/VGA, PS/2 and audio cables
Cable ties are included in the accessories kit for the interfaces. These cable ties can be
installed on the rear panel, if necessary.
Procedure
1. Insert the supplied strain relief into bore
2. Fasten the cables with the cable ties to the strain relief.
3.3.7
Multi-monitoring
You can operate up to five monitors simultaneously at the interfaces of the integrated
graphics controller in combination with the optional graphics card. Parameter assignment is
performed by means of the Control Panel in Windows.
The following monitors can be operated simultaneously on the motherboard:
● 2 × DisplayPort, 1 × DVI
● 2 × DisplayPort, 1 × VGA
● 1 × DisplayPort, 1 × DVI via DisplayPort-DVI adapter, 1 × DVI
● 1 × DisplayPort, 1 × VGA via DisplayPort-VGA adapter, 1 × DVI/VGA
Note
The motherboard supports up to one additional DVI monitor if it is connected by means of a
passive DisplayPort-DVI adapter.
SIMATIC IPC847D
Operating Instructions, 01/2014, A5E32997454-AA
Installing and connecting the device
①
②
or
of the rear panel.
3.3 Connecting the device
51
- Quick Links:
- Replacing Hard Disks
Hide quick links:
Advertisement
Table of Contents
