Notes on installation
Installing the RBGDF Dual Fuel
Backguard
The rear of the range must be
accessible.
Install the backguard before installing
the anti-tip device and connecting of
the range.
Loosen the screws of the island trim.
Pull back the island trim slightly until
it can be removed.
The backguard can be installed in
reverse order.
22
RBS Backsplash
The backsplash is intended for
installation to a Miele Range Hood (DAR
model). Observe the installation
instructions of the Miele Range Hood.
XKM 3000 W Remote Vision (USA
Only)
Depending on the model, the range
maybe compatible with
TM
RemoteVision
.
In order to use the RemoteVision
monitoring service, you will require a
XKM 3000 W Communication Module.
Refer to the Operating and Installation
Instructions of the Miele XKM 3000 W
Communication Module.
TM