hit counter script

Playback Procedures; Normal Playback; Playback In Jog Mode - Sony HDCAM J-H1 Operation Manual

Digital videocassette compact player
Hide thumbs Also See for HDCAM J-H1:
Table of Contents

Advertisement

4-2 Playback Procedures

4-2-1 Normal Playback

Cassette compartment
SHIFT button
AU MON SEL button
PLAY button
Insert a cassette beforehand.
For details of how to insert a cassette, see "Inserting and
ejecting cassettes" on page 3-2.
To start playback
Press the PLAY button.
To stop playback
Press the STOP button.
If you play back to the end of the tape
The tape is automatically rewound, and stops.
(When AUTO REWIND, extended menu item 125, is
set to ENA)
Note
This unit uses an auto-tracking function. The factory
setting for the auto-tracking is on (AUTO TRACKING
ON). You can turn auto-tracking off. For details on
how to change the setting, contact your nearest Sony
dealer. While this unit is pulling the tape in, the PLAY
button indicator B flashes.
STOP button

4-2-2 Playback in Jog Mode

In jog mode, the JOG dial controls the playback speed
based the speed at which the dial is turned. The
playback speed range is ±1 times normal speed.
Use the following procedure to carry out playback in
shuttle mode.
1
Turn the JOG dial directly or press the JOG/
SHUTTLE button to light the JOG indicator.
Pressing the JOG/SHUTTLE button toggles
between jog mode and shuttle mode.
2
Turn the JOG dial in the desired direction, at a
speed corresponding to the desired playback speed.
Playback in jog mode starts.
3
To stop playback in jog mode, stop turning the
JOG dial.
It is possible to make pressing the JOG/SHUTTLE
button to switching between JOG and SHUTTLE
mode.
Select "KEY" in SELECTION FOR JOG/
SHUTTLE DIAL ENABLE, extended menu item
101, to enable the above feature. (This is the
default setting.)
1
1,2,3
4-3
Chapter 4 Playback

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

J-h3Hkj-h1

Table of Contents