Related Manuals for Sony 3-298-611-11(1)
Summary of Contents for Sony 3-298-611-11(1)
- Page 1 DVD Home Theatre System Operating Instructions DAV-DZ360WA ©2008 Sony Corporation 3-298-611-11(1)
- Page 2 Civic Office, your household waste disposal service or the shop where you purchased the product. The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
-
Page 3: About This Operating Instructions
Precautions On power sources • AC power cord (mains lead) must be changed only at the qualified service shop. • The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (mains), even if the unit itself has been turned off. -
Page 4: Table Of Contents
Table of Contents About This Operating Instructions... 3 About the S-AIR function... 3 Playable Discs... 5 Getting Started Step 1: Positioning the System ...10 Step 2: Connecting the System ...13 Step 3: Performing the Quick Setup ...21 Step 4: Enjoying Sound from all the Speakers ...24 Sound Adjustment Enjoying Surround Sound by Using... -
Page 5: Playable Discs
Playable Discs Type Disc logo DVD VIDEO VR (Video Recording) mode Super Audio CD VIDEO CD DATA CD – DATA DVD – MP3 (MPEG1 Audio Layer 3) is a standard format defined by ISO/MPEG which compresses audio data. MP3 files must be in MPEG1 Audio Layer 3 format. - Page 6 JPEG image files must conform to the DCF image file format. (DCF “Design rule for Camera File system”: Image standards for digital cameras regulated by Japan Electronics and Information Technology Industries Association (JEITA).) ® DivX is a video file compression technology, developed by DivX, Inc. DivX, DivX Certified, and associated logos are trademarks of DivX, Inc.
- Page 7 This system incorporates High-Definition Multimedia Interface (HDMI HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. “BRAVIA” and “S-AIR” and its logo are trademarks of Sony Corporation. are trademarks of Sony Corporation. ) technology.
-
Page 8: Getting Started
Getting Started Unpacking • Front speakers (2) and surround speakers (2) • Center speaker (1) • Subwoofer (1) • AM loop antenna (aerial) (1) • FM wire antenna (aerial) (1) • Speaker cords (6, red/white/ green/gray/blue/purple) • Remote commander (remote) (1) •... -
Page 9: Inserting Batteries Into The Remote
Inserting batteries into the remote Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the markings inside the compartment. To use the remote, point it at the remote sensor Note • Do not leave the remote in an extremely hot or humid place. •... -
Page 10: Step 1: Positioning The System
• Do not lean or hang on the speaker, as the speaker may fall down. • When you change the positions of the speakers, Sony recommends that you change the settings. For details, see “Getting Optimal Surround Sound for a Room” (page 76) and “Calibrating the Appropriate Settings Automatically”... - Page 11 To install the speakers on a wall Before installing the speakers on a wall, connect the speaker cord to the speaker. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Color tube Front speaker (L): White Front speaker (R): Red...
- Page 12 • Contact a screw shop or installer regarding the wall material or screws to be used. • Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc.
-
Page 13: Step 2: Connecting The System
Step 2: Connecting the System See the connection diagram below, and read the additional information from 1 to 6 on the following pages. Note • Be sure to make connections securely to avoid hum and noise. • When you connect another component with a volume control, turn up the volume of the other components to a level where sound is not distorted. -
Page 14: Connecting The Speakers
1 Connecting the Speakers The connector and color tube of the speaker cords are the same color as the label of the jacks to be connected. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. -
Page 15: Connecting The Tv
2 Connecting the TV For video output to your TV, check the video input jacks of the TV, and select connection method A or B. Picture quality improves in order from A (standard) to B (HDMI). When the TV has the digital optical or coaxial output jack, you can improve sound quality by connecting with the digital cord (A). -
Page 16: Connecting The Other Components
3 Connecting the other components You can enjoy the connected component using the six speakers of the system. • Portable audio source: A • DIGITAL MEDIA PORT adapter: B Stereo mini-plug cord (not supplied) SPEAKER FRONT R FRONT L SUR R SUR L SPEAKER DIGITAL IN... - Page 17 If your TV has multiple audio/video inputs You can enjoy the sound with the speakers of the system through the connected TV. Connect the components as follows. System Select the component on the TV. For details, refer to the operating instructions of the TV. If the TV does not have multiple audio/video inputs, a switcher will be necessary to receive the sound from more than two components.
-
Page 18: Connecting The Antenna (Aerial)
4 Connecting the antenna (aerial) SPEAKER FRONT R FRONT L SUR R SPEAKER DIGITAL IN CENTER SUBWOOFER COAXIAL OPTICAL HDMI OUT Note • Keep the AM loop antenna (aerial) and cord away from the system or other AV components, as noise may result. •... -
Page 19: Inserting The Wireless Transceiver
5 Inserting the wireless transceiver You can transmit sound from the unit to an S-AIR product, such as a surround amplifier or S-AIR receiver. An S-AIR product is a component that is compatible with the S-AIR function. To use the S-AIR function, you need to insert the wireless transceivers into the unit, surround amplifier, and S-AIR receiver. -
Page 20: About The Demonstration
6 Connecting the AC power cords (mains leads) Before connecting the AC power cord (mains lead) of the unit to a wall outlet (mains), connect all the speakers to the unit. Rear panel SPEAKER CENTER SUBWOOFER COAXIAL To the wall outlet (mains) Also, connect the AC power cord (mains lead) of the S-AIR receiver to a wall outlet (mains). -
Page 21: Step 3: Performing The Quick Setup
Step 3: Performing the Quick Setup Follow the Steps below to make the basic adjustments for using the system. Displayed items vary depending on the country model. Note • When you connect the system and the TV with the HDMI cable (not supplied), you need to set the type of video output for matching your TV. - Page 22 • [RGB]: outputs RGB signals. Note • If your TV does not accept RGB signals, no picture appears on the TV screen even if you select [RGB]. Refer to the operating instructions supplied with your TV. Press The Setup Display for selecting the speaker formation appears.
- Page 23 Unplug the calibration mic and press C/ c to select [YES]. Note • The environment of the room in which the system is installed may affect measurements. • If measurement fails, follow the message then retry [AUTO CALIBRATION]. Press Quick Setup is finished. All connections and setup operations are complete.
-
Page 24: Step 4: Enjoying Sound From All The Speakers
Step 4: Enjoying Sound from all the Speakers You can enjoy DVD, TV, or VCR sound from all the speakers in this system. X/x/c, Press FUNCTION +/– repeatedly until the desired function appears in the front panel display. Each time you press FUNCTION +/–, the function changes as follows. - Page 25 Press FUNCTION +/– repeatedly until “TV” or “AUDIO” appears in the front panel display. Press SYSTEM MENU. Press X/x repeatedly until “ATTENUATE” appears in the front panel display, then press Press X/x to select a setting. • “ATT ON”: You can attenuate the input level.
-
Page 26: Sound Adjustment
Sound Adjustment Enjoying Surround Sound by Using Decoding Mode You can enjoy surround sound simply by selecting one of the system’s pre-programmed decoding modes. They bring exciting and powerful sound of movie theaters into your home. Press SYSTEM MENU. Press X/x repeatedly until “DEC. MODE” appears in the front panel display, then press or c. - Page 27 Display Decoding mode “PLII MOVIE” Dolby Pro Logic II MOVIE “PLII MUSIC” Dolby Pro Logic II MUSIC “2CH STEREO” 2 CHANNEL STEREO “HP 2CH” HEADPHONE 2 CHANNEL STEREO “HP VIRTUAL” HEADPHONE VIRTUAL Press The setting is made. Press SYSTEM MENU. The system menu turns off.
-
Page 28: Selecting The Sound Mode
Selecting the Sound Mode You can select a suitable sound mode for movies or music. Press SOUND MODE repeatedly during playback until the desired mode appears in the front panel display. • “AUTO”: The system selects “MOVIE” or “MUSIC” automatically to produce the sound effect depending on the disc. -
Page 29: Disc
Disc Playing a Disc Depending on the DVD VIDEO or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. Adjust the volume "/1 FUNCTION Disc tray Connect headphones STEP Turn on your TV. Switch the input selector on the TV to this system. - Page 30 To use the headphones Connect the headphones to PHONES jack on the unit. The sound of the system is muted. You can also connect the headphones to PHONES jack on the surround amplifier. (The sound of the system is muted.) Other operations Press Stop...
-
Page 31: Changing The Sound
To display the subtitles If subtitles are recorded on a disc, you can turn the subtitles on/off during playback. If multilingual subtitles are recorded on the disc, you can change the subtitle language during playback, or turn the subtitles on/off whenever you want. - Page 32 Checking the audio signal format If you press AUDIO repeatedly during playback, the format of the current audio signal (PCM, Dolby Digital, DTS, etc.) appears as shown below. x DVD Example: Dolby Digital 5.1 channel Surround (L/R) 1: ENGLISH DOLBY DIGITAL 3 / 2 .1 Front (L/R) + Center Currently playing program format...
- Page 33 The Control Menu display appears on the TV screen. Press X/x to select AUDIO CD/CD LAYER], then press x When the current layer is the CD layer [SUPER AUDIO CD] appears. x When the current layer is the Super Audio CD layer [CD] appears.
-
Page 34: Using Play Mode
– you eject the disc. – the system enters standby mode (DATA CD/ DATA DVD only). – you change or reset the settings on the Setup Display. – you change the parental control level. – you change the function by pressing FUNCTION +/–. -
Page 35: Playing In Random Order
Selected track PROGRAM 0: 03:51 ALL CLEAR – – 1. TRACK – – 2. TRACK – – 3. TRACK – – 4. TRACK – – 5. TRACK – – 6. TRACK – – 7. TRACK Total time of the programmed tracks To program other tracks, repeat Steps 4 to 5. -
Page 36: Playing Repeatedly
Shuffle Play starts. To return to normal play Press CLEAR, or select [OFF] in Step 3. To turn off the Control Menu display Press DISPLAY repeatedly until the Control Menu display is turned off. Note • You cannot use Shuffle Play with a VIDEO CD or Super VCD with PBC playback. -
Page 37: Searching/Selecting A Disc
Searching/Selecting a Disc Using the DVD’s menu A DVD is divided into a lot of sections, which make up a picture or music feature. These sections are called “titles.” When you play a DVD which contains several titles, you can select the title you want using DVD TOP MENU. - Page 38 The number in parentheses indicates the total number of titles, chapters, tracks, indexes, scenes, folders, or files. 9 8 ( 9 9 ) 1 3 ( 9 9 ) 0 : 0 3 : 1 7 Selected row Press [** (**)] changes to [– – (**)]. 9 8 ( 9 9 ) 1 3 ( 9 9 ) 0 : 0 3 : 1 7...
-
Page 39: Playing Mp3 Files/Jpeg Image Files
Playing MP3 Files/JPEG Image Files You can play the MP3 files or JPEG image files: • which have the extension “.MP3” (MP3 file) or “.JPG”/“.JPEG” (JPEG image file) • which conform to the DCF* image file format * “Design rule for Camera File system”: Image standards for digital cameras regulated by Japan Electronics and Information Technology Industries Association (JEITA). - Page 40 The folders recorded on the DATA CD or DATA DVD appear. When a folder is being played, its title is shaded. FOLDER LIST 01 Let's Talk About Love (1985) 02 1st Album (1986) 03 In the Middle of Nowhere (1986) 04 Ready for Romance (1986) 05 In the Garden of Venus (1987) 06 Romantic Warriors (1987)
- Page 41 • If you play large MP3 file and JPEG image file at the same time, the sound may skip. Sony recommends that you set the MP3 bit rate to 128 kbps or lower when creating the file. If the sound still skips, reduce the size of the JPEG image file.
-
Page 42: Enjoying Divx® Videos
• [OFF]: Off. Press Note • The [EFFECT] setting is not effective when you set [JPEG RESOLUTION] in [HDMI SETUP] to [(1920 × 1080i) HD ] or [(1920 × 1080i) HD] (page 50). ® Enjoying DivX About DivX video files ®... -
Page 43: Selecting A Folder
files with the extension “.AVI” or “.DIVX” if they do not contain a DivX video. • For details about playable MP3 audio tracks or JPEG image files on a DATA CD or DATA DVD, see “Playable Discs” (page 5). Note •... -
Page 44: Adjusting The Delay Between The Picture And Sound
• If the number of viewing times is preset, you can play the DivX video files as many times as the preset number. The following occurrences are counted: – when the system is turned off. – when another file is played. –... -
Page 45: Restricting Playback Of The Disc
Restricting Playback of the Disc [PARENTAL CONTROL] Playback of some DVD VIDEOs can be limited according to a predetermined level such as the age of the users. Scenes may be blocked or replaced with different scenes. You can set the playback restriction by registering a password. -
Page 46: Changing The Password
To turn off the [PARENTAL CONTROL] function Set [LEVEL] to [OFF] in Step 11. To play a disc for which [PARENTAL CONTROL] is set Load the disc and press H. The display for entering your password appears. Enter your 4-digit password using the number buttons, then press The system starts playback. -
Page 47: Using The Setup Display
Using the Setup Display You can make various adjustments of items such as picture and sound. Displayed items vary depending on the country model. Note • Playback settings stored in the disc take priority over the Setup Display settings and not all the functions described may work. -
Page 48: Settings For The Display
x [OSD] (On-Screen Display) You can switch the display language on the TV screen. x [MENU] (DVD VIDEO only) You can switch the language for the disc’s menu. x [AUDIO] (DVD VIDEO only) You can switch the language of the sound track. When you select [ORIGINAL], the language given priority in the disc is selected. -
Page 49: Settings For The Hdmi
x [PAUSE MODE] (DVD VIDEO/DVD-R/ DVD-RW only) You can select the picture in pause mode. [AUTO]: The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. [FRAME]: The picture, including subjects that do not move dynamically, is output in high resolution. -
Page 50: Settings For The Audio
[ON]: The system outputs audio signals by converting Dolby Digital, DTS, or 96 kHz/24 bit PCM signals to 48 kHz/16 bit PCM. Note • When you connect the unit and TV with an HDMI cable and [ON] is selected, [AUDIO DRC], [A/V SYNC], DYNAMIC BASS, “DEC. -
Page 51: Other Settings
x [TRACK SELECTION] (DVD VIDEO only) You can give the sound track which contains the highest number of channels priority when you play a DVD VIDEO on which multiple audio formats (PCM, DTS, Dolby Digital, or MPEG audio) are recorded. [OFF]: Off. - Page 52 SPEAKER SETUP CONNECTION: DISTANCE(FRONT): DISTANCE(SURROUND): LEVEL(FRONT): LEVEL(SURROUND): TEST TONE FRONT: CENTER: SURROUND: SUBWOOFER: x [CONNECTION] If you do not connect center or surround speakers, set the parameters for [CENTER] and [SURROUND]. Since the front speaker and subwoofer setting is fixed, you cannot change them.
- Page 53 2)3) [L/R] 3.0 m/10 ft : Set the surround speaker distance (up to 5.0 meters (16 ft) closer to the front speakers). 0.0 to 6.9 meters for North American models. When you perform the Quick Setup (page 21), the default settings are changed. This item appears when you set [SURROUND] to [YES] in the [CONNECTION] setting.
-
Page 54: Tuner
• You can operate the tuner function by observing the following display on the TV screen. Current band and preset number FM 10 : 88.00 MHz SONY RADIO Station name Press FUNCTION +/– repeatedly until “TUNER FM” or “TUNER AM” appears in the front panel display. -
Page 55: Listening To The Radio
Listening to the Radio Preset radio stations in the system’s memory first (see “Presetting Radio Stations” (page 54)). Press FUNCTION +/– repeatedly until “TUNER FM” or “TUNER AM” appears in the front panel display. The last received station is tuned in. Press PRESET +/–... - Page 56 1 t 2 t ... t 1 t ... x “TUNER FM” When the station name is set 1 Station name Ex. “SONY RADIO” 2 Frequency Ex. “FM1 87.50” 3 The “FM MODE” setting Ex. “STEREO” When the station name is not set 1 Frequency Ex.
-
Page 57: Using The Radio Data System (Rds)
Using the Radio Data System (RDS) What is the Radio Data System? The Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features, such as station name display. RDS is available only for FM stations.* Note •... -
Page 58: Control For Hdmi/External Audio Device
HDMI function may not work. Refer to the operating instructions supplied with the component. • The Control for HDMI function may not work if you connect a component other than Sony, even if the component is compatible with the Control for HDMI function. - Page 59 To set the [CONTROL FOR HDMI] function to on/off Press FUNCTION +/– repeatedly until “DVD” appears in the front panel display. Press DISPLAY while the system is in stop mode. The Control Menu display appears on the TV screen. Press X/x to select then press The options for [SETUP] appear.
- Page 60 Enjoying TV sound from the speakers in this system (System Audio Control) You can enjoy TV sound in this system by easy operation. To use this function, connect the system and the TV with an audio cord (not supplied) and an HDMI cable (not supplied) (page 15).
-
Page 61: Playing Back Audio Files/Jpeg Image Files Of A Usb Device
Playing Back Audio Files/JPEG Image Files of a USB Device You can play audio files (MP3/WMA/AAC files)/JPEG image files stored in a USB device such as the digital music player or USB storage media (not supplied) by connecting the USB device to the unit. - Page 62 Notes on the USB device • The system can play back up to 200 folders, including albums that do not contain audio files and JPEG image files. When more than 200 folders are in the USB device, folders that are recognized by the system differ depending on the folder configuration.
- Page 63 FOLDER LIST 01 Let's Talk About Love (1985) 02 1st Album (1986) 03 In the Middle of Nowhere (1986) 04 Ready for Romance (1986) 05 In the Garden of Venus (1987) 06 Romantic Warriors (1987) 07 Back for Good (1988) 08 Alone (1999) Press X/x to select a folder.
- Page 64 Press X/x to select a folder. x To play JPEG image files in a folder as a slide show Press H to start playing the selected folder. The JPEG images are played as a slide show. You can change the interval of the slide show (page 64), and add effects to the slide show (page 64).
- Page 65 Press X/x to select then press The options for [EFFECT] appear. Press X/x to select a setting. • [MODE 1]: The JPEG image file sweeps in from top to bottom. • [MODE 2]: The JPEG image file stretches out from left to right of the TV screen. •...
- Page 66 Press DISPLAY. (When playing a JPEG image files, press twice.) The Control Menu display appears on the TV screen. Press X/x to select the search method. • [TRACK]: audio files. • [FILE]: JPEG image files. • [FOLDER]: Folders. [** (**)] is selected (** refers to a number). The number in parentheses indicates the total number of audio files, JPEG image files, or folders.
-
Page 67: Storing Songs In A Usb Device
ID3 ver 2.2/2.3 tag information display has priority when both ID3 ver 1.0/1.1 and ver 2.2/2.3 tags are used for a single MP3 file. Note • Characters/marks may not be displayed in some languages. • Depending on the type of file being played, the system can only display a limited number of characters. - Page 68 • Some USB devices cannot be played back on the system depending on the file format. Recording songs on an audio CD into a USB device Load an audio CD. Press DISPLAY while the system is in stop mode. The Control Menu display appears on the TV screen.
- Page 69 Recordable space of the USB device USB RECORDING Free: 2002_Remixes 01_Back_Seat_O... 02_One_Nights_... 03_Are_You_Ma... 04_I_Can_Lose_... 05_Soul_Survivo... 06_Strangers_B... 07_Stay_maxi_ve... MP3 files/folders to be copied. x To select the desired MP3 file/folder Press X/x to select the MP3 file/folder, then press The MP3 files/folders are marked. x To select all MP3 files/folders Press C/X/x/c to select [ press...
-
Page 70: Using The Digital Media Port Adapter
Using the DIGITAL MEDIA PORT Adapter The DIGITAL MEDIA PORT (DMPORT) adapter (not supplied) is for enjoying sound from a portable audio source or computer. By connecting a DIGITAL MEDIA PORT adapter, you can enjoy sound from the connected component on the system. Available DIGITAL MEDIA PORT adapters vary in each area. -
Page 71: Using An S-Air Product
Using an S-AIR Product The unit is compatible with the S-AIR function (page 98), which allows sound transmission between S-AIR products. About S-AIR products There are two types of S-AIR product. • S-AIR main unit (this unit): This is for transmitting sound. - Page 72 Sound transmission is established as follows (example): This unit ID A ID A ID A S-AIR sub unit S-AIR sub unit • To confirm the current ID, perform Steps 1 to 7 above. When you pair the unit with the S-AIR sub unit (page 73), [(PAIRING)] appears beside ID on the display for selecting ID.
- Page 73 When “TUNER FM” or “TUNER AM” is selected on the unit, you can only select the same band for the tuner on the S-AIR receiver. In this case, when you select other than “TUNER FM” or “TUNER AM” on the unit, you can select any band for the tuner on the S-AIR receiver.
- Page 74 Your room This unit ID A ID A S-AIR sub unit x After pairing Sound transmission is established between the paired unit and S-AIR sub unit(s) only. Your room This unit ID A ID A S-AIR sub unit Pairing To perform pairing Place the S-AIR sub unit that you want to pair near the unit.
- Page 75 Press C/c to select the next operation. x To finish pairing Select [NO], then press x To perform pairing of another S-AIR sub unit Select [YES], then press Note • If you perform the pairing operation between the unit and another S-AIR sub unit (page 73), sound transmission established by ID is canceled.
-
Page 76: Other Operations
• [NO]: Exit [SPEAKER FORMATION]. Note • In order to enjoy the surround sound after you change the position of the speakers, Sony recommends you set [SPEAKER FORMATION], and then set [AUTO CALIBRATION] (page 77). • When you change the [CONNECTION] setting in [SPEAKER SETUP] (page 51), the [SPEAKER FORMATION] setting returns to [STANDARD]. -
Page 77: Calibrating The Appropriate Settings Automatically
Calibrating the Appropriate Settings Automatically [AUTO CALIBRATION] D. C. A. C. (Digital Cinema Auto Calibration) can set the appropriate surround sound automatically. Note • The system outputs a loud test sound when [AUTO CALIBRATION] starts. You cannot turn the volume down. -
Page 78: Controlling The Tv With The Supplied Remote
See page 51. Controlling the TV with the Supplied Remote You can control the TV (Sony only) by using following buttons. Use these buttons (other than TV [/1, THEATRE, TV INPUT, and TV VOL +/–) while pressing the TV button. -
Page 79: Using The Sound Effect
Using the Sound Effect Reinforcing bass frequencies You can reinforce bass frequencies. Press DYNAMIC BASS. “D. BASS ON” appears in the front panel display and bass frequencies are effectively reinforced. To turn off the sound effect Press DYNAMIC BASS again. Enjoying the sound at low volume You can enjoy sound effects or dialogue, as you... -
Page 80: Changing The Brightness Of The Front Panel Display
Changing the Brightness of the Front Panel Display The brightness of the front panel display can be set to either of 2 levels. Press SYSTEM MENU. Press X/x repeatedly until “DIMMER” appears in the front panel display, then or c. press Press X/x to select the brightness of the front panel display. -
Page 81: Checking The Play Information
x DATA CD (DivX video file)/DATA DVD (DivX video file) 1 Playing time of the current file 2 Current file name 3 Current album and file number Note • The system can only display the first level of the DVD/CD text, such as the disc name or title. •... - Page 82 To check DATA CD/DATA DVD (MP3 file/DivX video file) text By pressing DISPLAY while playing MP3 files or DivX video files on a DATA CD/DATA DVD, you can display the name of the folder/ MP3 file/DivX video file, and the audio bit rate (the amount of data per second of the current audio) on the TV screen.
-
Page 83: Returning To The Default Settings
Returning to the Default Settings Returning the system parameters, such as preset stations, to the default settings "/1 Press "/1 to turn on the system. Press x, A, and "/1 on the unit at the same time. “COLD RESET” appears in the front panel display and the system returns to default settings. -
Page 84: Additional Information
If you have any questions or problems concerning your system, please consult your nearest Sony dealer. On cleaning discs, disc/lens cleaners • Do not use cleaning discs or disc/lens cleaners (including wet or spray types). -
Page 85: Notes About The Discs
transmission may result. In this case, take the following steps: – Do not install the system near other wireless systems. – Do not use the system and the other wireless systems at the same time. • The transmission distance differs depending on the usage environment. -
Page 86: Troubleshooting
Note that if service personnel changes some parts during repair, these parts may be retained. In the event of a problem with the S-AIR function, have a Sony dealer check the entire system together (main unit and S-AIR sub unit). - Page 87 Symptom Remedy Even though you set the aspect • The aspect ratio on the disc is fixed. ratio in [TV TYPE] of [VIDEO SETUP], the picture does not fill the TV screen. Color irregularity occurs on the The subwoofer and the front speakers in this system are magnetically shielded to TV screen.
- Page 88 Symptom The surround effect is difficult to hear when you are playing a sound track of Dolby Digital, DTS, or MPEG audio. The sound comes from the center speaker only. No sound is heard from the center speaker. No sound or only a very low- level sound is heard from the surround speakers.
- Page 89 Symptom Remedy The MP3 file cannot be played. • The DATA CD is not recorded in the MP3 format that conforms to ISO 9660 Level 1/Level 2, or Joliet. • The DATA DVD is not recorded in an MP3 format that conforms to UDF (Universal Disk Format).
- Page 90 • Multi-angles are not recorded on the DVD being played (page 30). • The DVD prohibits changing the angles. • Contact your Sony dealer or local authorized Sony service facility. • The MP3 file/JPEG image file/DivX video file you want to play is broken.
-
Page 91: Usb Device
(USB) port. Turn off the system and remove the USB device from the (USB) port. Make sure there is no problem with the USB device. If this display pattern persists, contact your nearest Sony dealer. Are you using a supported USB •... - Page 92 – the file size is extremely large. – the physical structure within the memory is fragmented. • Sony recommends following these guidelines. – Total folders on the USB device: 200 or less – Total files per folder: 150 or less...
- Page 93 USB device may be broken. Follow the procedure in the operating instructions of the USB device to format the USB device. If the problem persists, contact your nearest Sony dealer. Audio files or folders on the •...
- Page 94 Symptom No sound is heard from the S-AIR sub unit. There is noise or the sound skips. • If you use another S-AIR main unit, place it more than 8 m (26 Remedy • If you use another S-AIR main unit, place it more than 8 m (26 from the unit.
-
Page 95: Self-Diagnosis Function
[VER.X.XX] (X is a number) may appear on the TV screen. Although this is not a malfunction and for Sony service use only, normal system operation will not be possible. Turn off the system, and then turn on the system again to operate. -
Page 96: Specifications
Specifications Amplifier Section Stereo mode (rated) Surround mode (reference) RMS output power * Depending on the decoding mode settings and the source, there may be no sound output. Inputs (Analog) TV (AUDIO IN) AUDIO IN Inputs (Digital) TV (COAXIAL IN/OPTICAL IN) Outputs (Analog) Phones Super Audio CD/DVD System... -
Page 97: Glossary
S-Master. Glossary Digital Cinema Auto Calibration Digital Cinema Auto Calibration was developed by Sony to automatically measure and adjusts the speaker settings to your listening environment in a short period of time. Dolby Digital This movie theater sound format is more advanced than Dolby Surround Pro Logic. - Page 98 To ensure that the subtle nuances of these high- quality media are transmitted with no deterioration, Sony has developed a technology called “S-AIR” for the radio transmission of digital audio signals with no compression, and has incorporated this technology into the EZW- RT10/EZW-T100.
- Page 99 2 channel area Super Audio CD Multi channel area layer You can play the CD layer on a conventional CD player. Since both layers are on one side, it is not necessary to turn the disc over. To select a layer, see “To change a playback layer when playing a hybrid Super Audio CD”...
-
Page 100: Language Code List
Language Code List The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language 1027 Afar 1028 Abkhazian 1032 Afrikaans 1039 Amharic 1044 Arabic 1045 Assamese 1051 Aymara 1052 Azerbaijani 1053 Bashkir 1057 Byelorussian 1059 Bulgarian 1060 Bihari 1061 Bislama 1066 Bengali;... -
Page 101: Index To Parts And Control
Index to Parts and Control For more information, refer to the pages indicated in parentheses. Front panel A "/1 (on/standby) (21, 83) B A (open/close) (29) C Front panel display (103) D Play operation buttons (29) (remote sensor) (9) F FUNCTION (24) G VOLUME control (29) H PHONES jack (29) I AUDIO IN/A.CAL MIC jack (16, 21, 77) -
Page 102: Rear Panel
Rear panel SPEAKER CENTER SUBWOOFER A SPEAKER jacks (14) B EZW-RT10 slot (19) C COAXIAL 75Ω FM jack (18) D AM terminal (18) E EURO AV T OUTPUT (TO TV) jack (15) SPEAKER FRONT R FRONT L SUR R SUR L DIGITAL IN COAXIAL OPTICAL... -
Page 103: Front Panel Display
Front panel display About the indications in the front panel display A Playing status B Flashes when the sleep timer is set. (79) C Displays system’s status such as chapter, title, or track number, time information, radio frequency, playing status, decoding mode, etc. D Lights up when a station is received. -
Page 104: Remote Control
Remote control ALPHABETICAL ORDER A – O ANGLE 3 (30) AUDIO qh (31) CLEAR es (34, 47, 55) D.TUNING ws (55) DISC SKIP DISPLAY wa (56, 66, 80) DVD MENU wg (37) DVD TOP MENU qd (37) DYNAMIC BASS 6 (79) ENTER wf (20, 21, 32, 34, 54, FUNCTION +/–... -
Page 105: Guide To The Control Menu Display
Guide to the Control Menu Display You can use the Control Menu display to select a function and to view related information. DISPLAY Press DISPLAY repeatedly. Each time you press DISPLAY, the Control Menu display changes: 1 t 2 t ... t 1 t ... 1 Control Menu display 1 2 Control Menu display 2 (appears when available) 3 Control Menu display off... - Page 106 Example: Control Menu display 1 when playing a DVD VIDEO. Control Menu items Selected item Function name of selected Control Menu item Operation message To turn off the display Press DISPLAY. List of Control Menu items Item Item Name, Function, Relevant Disc Type [TITLE] (page 37)/[SCENE] (page 37)/[TRACK] (page 37) You can select the title, scene, or track to be played.
- Page 107 [SHUFFLE] (page 35) You can play the track/file in random order. [REPEAT] (page 36) You can play the entire disc (all titles/all tracks/all folders/all files) repeatedly or one title/ chapter/track/folder/file repeatedly. [A/V SYNC] (page 44) You can adjust the delay between the picture and sound. [DISC MENU] (page 37) You can display the DVD’s menu.
- Page 108 [EFFECT] (page 64) You can select the effects to be used for changing slides during a slide show. [MODE (MUSIC, IMAGE)] (pages 62, 63) You can select the data type; MP3/AAC/WMA file or JPEG image file, when playing a USB device.
-
Page 109: Index
Index Numerics 5.1 Channel Surround 32 A/V SYNC 44 AAC file 61 ANGLE 30 ATTENUATE 25 AUDIO 48 AUDIO (HDMI) 49 AUDIO DRC 50 AUDIO SETUP 50 AUTO CALIBRATION 50, 77, BACKGROUND 51 COLD RESET 83 CONTROL FOR HDMI 49 Control for HDMI 58 Control Menu Display 105 CUSTOM 47, 83... - Page 112 Sony Corporation Printed in China...