Your computer is equipped with either the built-in flash memory storage or hard disk drive, depending on the model you purchased. See the online Specifications to find

which storage device your model is equipped with.

When adding the hard disk password, you must set both the master and user passwords. The master password is provided

for users with administrator rights on the computer to reset the user password on the BIOS setup screen. The user password

is provided to lock your built-in flash memory or hard disk. Once you set the user password, you will have to enter the

password along with the power-on password (if set), after the VAIO logo appears.

You cannot start your computer with the master password.

If you forget the master password or the keyboard fails, which is critical to password entry, no bypass is possible and the data stored on the built-in

flash memory or hard disk will not be accessible. There is NO RESET of this password. You will have to replace the built-in flash memory or hard disk

at your own expense and lose all the data stored on the original flash memory or hard disk. Make sure to write down the master password and keep it

safe and private from other people.

If you have set the hard disk password in conjunction with the fingerprint authentication functionality, you can substitute fingerprint recognition for

password entry when turning on your computer. For more information, see Using Fingerprint Authentication

Customizing Your VAIO Computer

. If you

(page

102).

Table of Contents