Direct Tuning Using The Remote; Using The Tuner Menus - Sony STR-DA777ES Primary Operating Instructions Manual
Hi-fi receivers: fm stereo/fm-am receiver
Hide thumbs
Also See for STR-DA777ES Primary:
- Service manual (80 pages) ,
- Technical background (38 pages) ,
- Limited warranty (1 page)
Table of Contents
Advertisement
Direct Tuning Using the
Remote
Use the supplied remote to perform the following
operations.
For details on the buttons used in this section, see the
operationg instructions for the supplied remote.
1
Touch FUNCTION and SUB on the remote to select
TUNER.
The last received station is tuned in.
2
Press FM/AM to select the FM or AM band.
3
Touch DIRECT on the remote.
4
Press the numeric buttons to enter the frequency.
Example 1: FM 102.50 MHz
1
0
2
b
b
Example 2: AM 1350 kHz
(You don't have to enter the last "0" when the tuning scale is
set to 10 kHz.)
1
3
b
b
If you cannot tune in a station and the
entered numbers flash
Make sure you've entered the right frequency. If not,
repeat Steps 3 and 4.
If the entered numbers still flash, the frequency is not
used in your area.
5
If you've tuned in an AM station, adjust the
direction of the AM loop antenna for optimum
reception.
6
Repeat Steps 2 to 5 to receive another station.
z
If you try to enter a frequency that is too precise for the
tuning scale
The entered value is automatically rounded up or down.
5
0
b
b
5
0
b
Using the Tuner Menus
See "Automatic/Manual tuning" (page 49), "Preset
Tuning" (page 50) and "Direct Tuning Using the Remote"
(this page) for details.
p Tuning mode setting (TUNE MODE)
Initial setting : AUTO
To tune in receivable stations automatically, select
"AUTO".
When you want to tune in a station that has a signal too
weak to be tuned in AUTO mode, select "MANUAL" to
change the frequency manually.
p FM mode (FM MODE)
Initial setting : STEREO
Normally, select "STEREO". If FM stereo reception is
poor, select "MONO". You will not be able to enjoy the
stereo effect, but the overall sound will be clearer.
p Naming preset stations (FM)
This setting lets you register a name of up to 8 characters
for the currently selected preset station. Touch
move the position and turn the jog dial to select a
character. When you are finished entering the name, press
ENTER. When you want to clear a name that has been
registered, touch
or
to make the 8 character boxes
blink. Turn the jog dial one click to the right to make the
name appear as 8 spaces and then press ENTER.
z
You can display the frequency of the station being received
Press TUNER, and then press
station that has a name registered.
p AM Tuning scale (AM X kHz –> Y kHz)*
Initial setting : NO
You can change the AM tuning scale. Press TUNER to
enter the tuner menu and press
display "AM X kHz n Y kHz". Turn the jog dial to
display "YES" and press ENTER. When "Are you sure?"
appears in the display, turn the jog dial to select "YES"
and press ENTER again. When you change the AM tuning
scale, AM preset stations are cleared.
* Except for Singapore/Malaysia models.
p Clearing preset stations (PRESET CLEAR)
Initial setting : NO
or
to
repeatedly during reception of a
or
repeatedly to
51
Hide quick links:
Advertisement
Table of Contents
