Sony RM-AV2100B Operating Instructions (primary manual) Operating Instructions Manual page 57

Remote controls: integrated remote commander

Hide thumbs Also See for RM-AV2100B Operating Instructions (primary manual):

Table of Contents

Symptom

The power of the

Commander turns off by

itself.

The power of the

Commander does not

turn on when you press a

button.

Your Commander does

not work as expected

after data transfer.

Note on the Commanders with the

Data transfer between Commanders with the

their functions and keys, and some of the System Control function data may be dropped.

For the customers in the U.S.A.

Customer Support Information

After you have read through this manual, if you still cannot get the Remote Commander to work

properly, call the Sony Customer Support Helpline at 1-800-822-2217.

Remedy

• This Commander is preset at the factory to switch the power off

automatically after 10 minutes if left unused. (Auto Power-Off, page 49)

You can change the power-off time from 10 to 90 minutes, or set the

Commander not to power off automatically.

• The Hold function is on ("OFF" appears on the display). Unlock the

Hold function (page 47).

• Data transfer to/from a single button cannot transfer System Control

functions that are learned by Component Select buttons. Either set up

the learned Commander from the start, or perform whole data transfer.

mark

mark may not always be complete, depending on

Table of Contents

Show Quick Links

Table of Contents

Rm-av2100