Related Manuals for Sony SLV-ED55PS
Summary of Contents for Sony SLV-ED55PS
- Page 1 Video Cassette Recorder Operating Instructions PAL NTSC SLV-ED85PS/TH SLV-ED55PS © 2000 by Sony Corporation 3-058-427-12 (1)
- Page 2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. The mains lead must only be changed at a qualified service shop.
-
Page 3: Table Of Contents
Table of contents Getting Started Step 1: Unpacking Step 2: Setting up the remote commander Step 3: Connecting the VCR Step 4: Tuning your TV to the VCR8 10 Step 5: Selecting a language 11 Step 6: Presetting channels 17 Step 7: Setting the clock Basic Operations 19 Playing a tape 23 Recording TV programmes... -
Page 4: Getting Started
ED85TH and ED55PS. Check your model number by looking at the rear panel of your VCR. SLV-ED85PS is the model used for illustration purpose. Any difference in operation is clearly indicated in the text, for example,“SLV-ED55PS only.” Getting Started • Aerial cable... -
Page 5: Step 2: Setting Up The Remote Commander
(+) end clicks into position. Using the remote commander You can use this remote commander to operate this VCR and a Sony TV. Buttons on the remote commander marked with a dot (•) can be used to operate your Sony TV. If the TV... -
Page 6: Step 3: Connecting The Vcr
Step 3 Connecting the VCR Connect the aerial to your VCR and TV as shown below to watch TV programmes and VCR pictures on your TV. In addition, if your TV has audio/video (A/V) input jacks, we recommend you connect the VCR to your TV using an audio/video cable to get a better picture and sound. -
Page 7: Additional Connections
You can improve sound quality by connecting a stereo system as shown on the right. For SLV-ED85PS/TH only LINE-1 OUT LINE IN Audio/video cable (not supplied) For SLV-ED55PS only LINE-1 LINE IN Audio/video cable (not supplied) LINE-2 OUT Audio cable (not supplied) LINE IN... -
Page 8: Step 4: Tuning Your Tv To The Vcr8
Step 4 Tuning your TV to the VCR If you have connected your VCR to the TV using the audio/video cable, skip this step. ?/1 ON/STANDBY ON/STANDBY Press ?/1 ON/STANDBY to turn on the VCR. Press RF CHANNEL on the VCR. The factory-preset RF channel flashes in the display window for about three seconds. - Page 9 VCR and TV using the audio/video cable (see “To a TV that has audio/video input jacks” on page 7). If the same symptom persists, consult your nearest Sony dealer. Note • If you set the wrong TV system, you may have no sound or sound may be distorted (noisy sound).
-
Page 10: Step 5: Selecting A Language
Step 5 Selecting a language You can change the on-screen display language from English to Arabic. Before you start… • Turn on your TV and set it to the video channel. • ]/1 Press ?/1 (on/standby) to turn on the VCR. MENU Press MENU, then press M/m to move the cursor (B) to LANGUAGE and press OK. -
Page 11: Step 6: Presetting Channels
Step 6 Presetting channels First, we recommend that you preset the receivable channels in your area using the One Touch Tuning function or the AUTO PRESET in the TUNER PRESET menu. Then, if some channels could not be preset automatically, set them manually;... -
Page 12: Before You Start
Step 6: Presetting channels (continued) Presetting all receivable channels automatically Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. Press MENU, then press M/m to move the MENU cursor (B) to TUNER PRESET and press PLAY Press M/m/</, to move the cursor (B) to SYSTEM, then select B/G, D/K or I,... - Page 13 Press M/m to move the cursor (B) to AUTO PRESET, then press OK. PLAY All receivable channels are preset in numerical sequence. When no more receivable channels can be found, presetting stops and the picture from the lowest numbered channel is displayed on the TV screen.
- Page 14 Step 6: Presetting channels (continued) Presetting channels manually Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. MENU Press MENU, then press M/m to move the cursor (B) to TUNER PRESET and press PLAY Press M/m/</, to move the cursor (B) to NORMAL/CATV, then select NORM.
- Page 15 PROG Press PROG +/– to select the programme position. Press , repeatedly until the channel you want is displayed. PLAY Pressing < goes back to the previous channels. The channels are scanned in the following order: Channel coverage CATV (TV distribution) If you know the number of the channel you want, press the programme number buttons.
-
Page 16: If The Picture Is Not Clear
Step 6: Presetting channels (continued) Disabling unwanted programme positions After presetting channels, you can disable unused programme positions. The disabled positions will be skipped later when you press the PROG +/– buttons. In step 5 on page 15, press programme number button “0” twice to display the number “0”... -
Page 17: Step 7: Setting The Clock
Step 7 Setting the clock You must set the time and date on the VCR to be able to use the timer recording features properly. Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. MENU Press MENU, then press M/m to move the cursor (B) to CLOCK SET and press OK. - Page 18 Step 7: Setting the clock (continued) Set the year, hour and minute in sequence, using , to flash the item to be set, and PLAY M/m to select the digits. Press OK to start the clock. PLAY • To change the digits during setting, press < to return to the item to be changed, and select the digits using M/m.
-
Page 19: Basic Operations
Basic Operations Playing a tape m 3 REW A EJECT COLOR SYSTEM X PAUSE Turn on your TV and set it to the video channel. Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed. - Page 20 Playing a tape (continued) Press H PLAY. When the tape reaches the end, it will rewind automatically. PLAY Additional tasks Stop play Pause play Resume play after pause Fast-forward the tape Rewind the tape Eject the tape To set the colour system If streaks appear during playback, press COLOR SYSTEM on the VCR to conform to the system that the tape was recorded in.
- Page 21 To use the time counter At the point on the tape that you want to find later, press CLEAR. The counter in the display window resets to “0:00:00.” Search for the point afterwards by referring to the counter. To display the counter on the TV screen, press DISPLAY. Notes •...
- Page 22 Turning on the VCR and TV, and starting playback automatically (Trinitron TV Synchro Play) You can only use this function if your TV is made by Sony (Trinitron TV). How to connect to use this function Connect the VCR and TV with the audio/video cable (see “To a TV that has audio/video input jacks”...
-
Page 23: Recording Tv Programmes
Recording TV programmes Turn on your TV and set it to the video channel. Insert a tape with its safety tab in place. PROG Press PROG +/– to select the programme position you want to record. DISPLAY z REC PROG +/– SP/LP (SP/EP) INPUT SELECT... - Page 24 Recording TV programmes (continued) SP/LP Press SP/LP (SP/EP) to select the tape speed, SP or LP. (SP/EP) LP (Long Play) provides recording time twice as long as SP (Standard Play), however, SP produces better picture and audio quality. Press z REC to start recording. The recording indicator lights up red in the display window.
- Page 25 LINE-2 IN (for SLV-ED55PS only) jacks. To select the line input, press INPUT SELECT or PROG +/– so that “L” (or “L1” or “L2” for SLV-ED55PS) appears in the display window. For tape speed, select SP or EP in step 4.
-
Page 26: Recording Tv Programmes Using The Easy Timer Function
Recording TV programmes using the Easy Timer function The Easy Timer function allows you to make a timer recording of a programme without turning on your TV. Set the recording timer to record only one programme that will be broadcast within the next 24 hours using the EASY TIMER knob. - Page 27 EASY TIMER Set the recording stop time in the same way as in step 2, then press the EASY TIMER knob. A programme number flashes. Turn the EASY TIMER knob clockwise or counterclockwise to select EASY TIMER the programme you want to record. To select the tape speed, press SP/LP (SP/EP).
-
Page 28: Setting Or Changing The Easy Clock
Recording TV programmes using the Easy Timer function (continued) Setting or changing the Easy Clock When “–:– –” is displayed in the display window, the VCR clock has not been set. You need to set the clock using the Easy Clock function before setting the timer. - Page 29 EASY TIMER Press the EASY TIMER knob to confirm the clock setting. The VCR enters the timer recording setting mode. To continue the Easy Timer setting, go to step 2 in “Setting the Easy Timer” on page 26. To quit the Easy Timer setting mode without changing any settings, press the EASY TIMER knob repeatedly until the t indicator appears in the display window.
- Page 30 Recording TV programmes using the Easy Timer function (continued) To stop recording To stop the VCR while recording, press x STOP. To check or change the timer setting Press the EASY TIMER knob repeatedly until the setting you want to check or change flashes.
- Page 31 To record from a source connected to LINE-1 IN jacks, press INPUT SELECT or PROG +/– or turn the EASY TIMER knob to display “L” in the display window. • (SLV-ED55PS) To record from a source connected to LINE-1 IN or LINE-2 IN jacks, press INPUT SELECT or PROG +/–...
-
Page 32: Setting The Timer Manually
Setting the timer manually You can preset up to eight programmes at a time. Before you start… • Check that the VCR clock is set to the correct time. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. - Page 33 For details, see “Daily/ weekly recording” below. To record from a source connected to the LINE-1 IN or LINE-2 IN (for SLV-ED55PS only) jacks; press INPUT SELECT or PROG +/– to display “L” (or “L1” or “L2” for SLV-ED55PS) in the “PROG” position.
-
Page 34: Additional Operations
Additional Operations Playing/searching at various speeds H PLAY m 3 REW Playback options View the picture during fast- forward or rewind Play at high speed Play at twice the normal speed Play in slow motion Play frame by frame Rewind and start play To resume normal playback Press H PLAY. -
Page 35: Setting The Recording Duration Time
Setting the recording duration time After you have started recording in the normal way, you can have the VCR stop recording automatically after a specified duration. While recording, press z REC. The t indicator appears in the display window. Press z REC repeatedly to set the duration. Each press advances the time in increments of 30 minutes. -
Page 36: Synchronised Recording (Slv-Ed85Ps/Th Only)
Synchronised recording (SLV-ED85PS/ TH only) The Synchronised Recording feature enables you to record from the connected equipment such as a satellite tuner, a cable TV decoder or a TV that has a timer function. Once you set the timer on the other equipment, the VCR will start recording the programme synchronised with the timer. - Page 37 Press SP/LP (SP/EP) to select the tape speed (SP or LP for the PAL colour system, and SP or EP for the NTSC colour system.) Hold down SYNCHRO REC for more than two seconds. The SYNCHRO REC button lights up and the VCR stands by for recording.
-
Page 38: Checking/Changing/Cancelling Timer Settings
Checking/ changing/ cancelling timer settings Before you start… • Turn on your TV and set it to the video channel. Press ?/1 to turn on the VCR. Press MENU, then select TIMER SET/CHECK: • If you want to change or cancel a setting, go on to the next step. - Page 39 Press M/m to select the setting you want to change or cancel: • To change the setting, press </, to flash the item you want to change, and press M/m to reset it. Then, press , repeatedly until the cursor (B) appears at the beginning of the line. •...
-
Page 40: Recording Stereo And Bilingual Programmes (Slv-Ed85Ps/Th Only)
Recording stereo and bilingual programmes (SLV-ED85PS/TH only) The VCR can record stereo and bilingual programmes only through the line input. When a stereo or bilingual sound is input through the line input, “STEREO” appears on the screen and in the display window. You cannot select the sound while recording. -
Page 41: Searching The Beginning Of An
Searching the beginning of an Easy Timer recorded programme If you record a programme using the Easy Timer function, you can easily find the beginning of the recording with this SEARCH function. The SEARCH indicator flashes when the VCR finishes the Easy Timer recording. -
Page 42: Searching Using The Index Function
Searching using the index function The VCR marks the tape with an index signal at the point where each recording begins. Use these signals as references to find a specific recording. The VCR can search up to 99 index signals ahead of or behind the current position. -
Page 43: The Vcr
Using the SEARCH button and EASY TIMER knob on the VCR Press SEARCH on the VCR repeatedly until “INDEX” appears in the display window (the SEARCH indicator lights up). Turn the EASY TIMER knob to specify how many index signals ahead or behind you want to search: •... -
Page 44: Searching Using The Time Search Function
Searching using the Time Search function You can easily find a specific point on a tape by using the Time Search function. For example, you can find a recorded portion 15 minutes ahead of or behind the current position of a tape by using the Time Search function. -
Page 45: Adjusting The Picture
Adjusting the picture Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape (the indicator flashes in the display window, then goes off), distortion may occur if the tape was recorded in poor condition. If so, manually adjust the tracking. - Page 46 Adjusting the picture (continued) • To set the tracking to the centre position, press the TRACKING + and – buttons at the same time. Note • There is a delay of a few seconds before the VCR actually starts recording while the VCR analyses the tape.
-
Page 47: Changing Menu Options
Changing menu options Press MENU, then select SET UP MENU. Press M/m to select the option to change, then press </, to change the setting. Press OK to return to the original screen. Menu choices Initial settings are indicated in bold print. Menu option AUDIO MIX (SLV-ED85PS/TH... -
Page 48: Editing With Another Vcr
Connect LINE-1 IN AUDIO on this VCR to the audio output jacks on the stereo system, using the RK-C510HG audio cable (not supplied). Tips • (SLV-ED55PS) Use the following audio/video cable according to the type of the other VCR. Jack... - Page 49 • (SLV-ED85PS/TH) Press INPUT SELECT or PROG +/– to display “L” in the display window. • (SLV-ED55PS) Press INPUT SELECT or PROG +/– to display “L1”or “L2” in the display window. • Press SP/LP (SP/EP) to select the tape speed (SP or LP for the PAL system, and SP or EP for the NTSC system).
-
Page 50: Additional Information
If these cleaning cassettes are not available in your area, have the heads cleaned at your nearest Sony service facility (a standard service charge will be required). Do not use a commercially available liquid type cleaning cassette other than Sony’s, as they may damage the video heads. - Page 51 • Select the correct source with the INPUT SELECT or PROG +/– buttons. Select a programme position when recording TV programmes; select “L” (or “L1” or “L2” for SLV-ED55PS) when recording from other equipment. • Adjust the TV aerial. • Make sure SYSTEM (B/G, D/K or I) in the TUNER PRESET menu is set to the system in your area.
- Page 52 When playback is finished, be sure to clean the heads with a video head cleaning cassette. Be sure to use the Sony T-25CLD, T-25CLW or E-25CLDR video head cleaning cassette. If these cleaning cassettes are not available in your area, have the heads cleaned at your nearest Sony service facility (a standard service charge will be required).
-
Page 53: Specifications
LINE-2 OUT AUDIO OUT, phono jack (2) Standard output: 327 mVrms Load impedance: 47 kilohms Output impedance: less than 10 kilohms (For SLV-ED55PS only) LINE-1 IN VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative... -
Page 54: Index To Parts And Controls
Index to parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel (SLV-ED85PS/TH) 1 ?/1 ON/STANDBY switch (8) 2 Remote sensor (5) 3 Tape compartment 4 A EJECT button (20) 5 m 3 REW (rewind) button (20, 34) 6 H PLAY button (20) 7 M # FF (fast-forward) button (20, 34) - Page 55 Front panel (SLV-ED55PS) !¶ !§ 1 ?/1 ON/STANDBY switch (8) 2 Remote sensor (5) 3 Tape compartment 4 A EJECT button (20) 5 m 3 REW (rewind) button (20, 34) 6 H PLAY button (20) 7 M # FF (fast-forward) button...
-
Page 56: Display Window
Index to parts and controls (continued) Display window 1 Timer indicator (27) 2 STEREO indicator (40) (SLV-ED85PS/TH only) 3 Tape speed indicator (24) 4 CLOCK indicator (28) 5 START indicator (26) 6 STOP indicator (26) Additional Information STEREO SP CLOCK START STOP 7 APC (Adaptive Picture Control) - Page 57 Rear panel (SLV-ED85PS/TH) 1 Mains lead (6) 2 LINE-2 OUT AUDIO R/L jacks (7) 3 AERIAL IN connector (6) 4 AERIAL OUT connector (6) Rear panel (SLV-ED55PS) 1 Mains lead (6) 2 LINE-1 IN AUDIO/VIDEO jacks (48) 3 AERIAL IN connector (6)
- Page 58 H PLAY/OK button (20) y SLOW button (34) qs ?/1 (on/standby) switch (33) qd AUDIO MONITOR button (40) (This button doesn’t work for SLV-ED55PS) qf CLEAR button (21, 39) qg Programme number /? (ten’s digit) buttons (29) qh PROG (programme) +/– buttons (23) qj VOL (volume) +/–...
- Page 59 Dubbing. See Editing E, F, G Easy Clock 28 Easy Timer recording 26 Editing 48 EP mode 25 Sony Corporation Head Condition Sensor 52 Hi-fi audio track 40 I, J, K Index searching 42 Language selecting 10 LP mode 24...