Table of Contents
Advertisement
4.2
B
4.2.1
banner
Description
This command defines a text banner to be displayed at the login prompt when a user is on a
Telnet or SSH session of an AP.
Syntax
banner motd <motd_text>
no...
Parameter
<motd_text>
no...
Usage Guidelines
The banner you define is displayed at the login prompt of the AP. The banner is specific to
the AP on which you configure it. The configured banner is displayed at the CLI login prompt
of the AP. SCALANCE W supports up to 16 lines text, and each line accepts a maximum of
255 characters including spaces.
Example
The following example configures a banner:
(scalance)(config)# banner motd "######welcome to login instant###########"
(scalance)(config)# banner motd "####please start to input admin and
password#########"
(scalance)(config)# banner motd "###Don't leak the password###"
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
All platforms
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Description
Indicates the text message that you define.
Removes the banner configuration.
Command Mode
Configuration mode
CLI Commands
4.2 B
59
Advertisement
Table of Contents
