Pre-Maintenance Procedures; Maintenance Safety; Opening The Hood - Toro Groundsmaster 4100 Operator's Manual
Hide thumbs
Also See for Groundsmaster 4100:
- Operator's manual (96 pages) ,
- Operator's manual (76 pages) ,
- Operator's manual (60 pages)
Table of Contents
Advertisement
Pre-Maintenance
Procedures
Maintenance Safety
•
Before adjusting, cleaning, repairing, or leaving
the machine, do the following:
– Park the machine on a level surface.
– Move the throttle switch to the low-idle position.
– Disengage the cutting units.
– Lower the cutting units.
– Ensure that the traction is in neutral.
– Engage the parking brake.
– Shut off the engine and remove the key.
– Wait for all moving parts to stop.
– Allow machine components to cool before
performing maintenance.
•
If the cutting units are in the transport position, use
the positive mechanical lock (if available) before
you leave the machine unattended.
•
If possible, do not perform maintenance while the
engine is running. Keep away from moving parts.
•
Use jack stands to support the machine or
components when required.
•
Carefully release pressure from components with
stored energy.
Opening the Hood
1.
Close the rear window of the cab
59
(Figure
Figure 72
72).
g037228
- Quick Links:
- Controls
Hide quick links:
Advertisement
Table of Contents
