hit counter script
HP 743 Series Technical Reference Manual For Oems
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Desktop
  5. 743 Series
  6. Technical reference manual for oems
HP 743 Series Technical Reference Manual For Oems

HP 743 Series Technical Reference Manual For Oems

Hide thumbs
Table of Contents

Advertisement

Quick Links

HP 743 Series Technical Reference Manual For Oems

Advertisement

Table of Contents
loading

Related Manuals for HP 743 Series

Summary of Contents for HP 743 Series

  • Page 1 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
  • Page 2 Technical Reference Manual for OEMs HP Models 743, 744, and 748 HP Part No. A4511-90601 Printed in USA August, 1997 Special Online Edition 1199 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 3: Legal Notices

    Legal Notices Legal Notices Manual Content Information in this manual is subject to change without notice. Hewlett-Packard makes no warranty of any kind about this manual, including, but not lim- ited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or direct, indirect, special, incidental, or consequential damages about the furnishing, performance, or use of this mate- rial.

  • Page 4: June 1996, Edition

    Printing History Printing History The printing date and edition number shown is the current edition of this manual. The print- ing date changes when a new edition is printed. Minor changes may be made at reprint with- out changing the printing date. August 1994, Edition 1 April 1995, Edition 2 September 1995 Edition 3...

  • Page 5: Safety Symbols And Conventions

    Safety Symbols and Conventions Safety Symbols and Conventions This manual uses the following conventions: NOTE: Notes contain important information set off from the text. CAUTION: Caution messages indicate procedures which, if not observed, could result in damage to equipment. Do not proceed beyond a CAUTION sign until the indicated conditions are fully understood and met.

  • Page 6: Table Of Contents

    Environmental Specifications for Monitors 1-31 Original Equipment Manufacturer (OEM) Support Overview 1-32 Standard Support 1-32 Additional OEM Support Programs 1-32 2 References HP Hardware Manuals 2-2 Contents-1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 7 Contents Installation Guides 2-2 Service Manuals 2-2 Diagnostic Manuals 2-3 HP Software Manuals 2-4 3 Quality Safety Compliance Programs 3-2 Introduction 3-2 Underwriter’s Laboratories (USA) 3-2 Canadian Standards Association (Canada) 3-2 TUV Rheinland (Germany) 3-2 Electromagnetic Compatibility Programs 3-3 Introduction 3-3...
  • Page 8 Chassis Parts and Models 4-29 5 Electrical Information Video Connector Pinouts 5-3 Audio Connector Pinouts 5-8 HP Parallel Connector Pinouts 5-10 RS-232 Connector Pinouts 5-12 AUI LAN Connector Pinouts 5-14 Single-Ended SCSI Connector Pinouts 5-16 FW SCSI Connector Pinout 5-18...
  • Page 9 Contents Power Budgeting 6-7 7 Product Design Considerations Application Information 7-2 VME Services Updates 7-2 VME Systems Design Considerations for Models 743, 744, and 748 7-2 System Integration 7-3 Hardware Power On Information 7-3 Contents-4 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 10: General Information

    General Information The General Information Chapter provides general information on the Model 743 and Model 744 VME Board Computers, the Model 748 Ruggedized Workstation, environmental speci- fications for the supported monitors, and OEM support. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 11: Model 743 And Model 744 Vme Board Computers

    Product Description HP Model 744 VME Board Computers are based on the PA 7300LC CPU. HP Model 743 VME Board Computers are based on the PA 7100LC CPU. Running either HP-UX or HP-RT operating systems, they are typically installed in a VME backplane.
  • Page 12 Source and binary code compatible with the Series 700 product family Monitors Single or multiple display depending on the number of installed graphics options (on- board and/or external). HP-UX 9.x supports up to two displays and HP-UX 10.x supports up to three displays. Color monitors...
  • Page 13 Optional Graphics Onboard (A4500A option 120) PMC Visualize-EG Graphics Card (A4979A) Note: A maximum of four graphics displays are allowed with HP-UX 10.10 ACE and later releases, a maximum of one graphics display with HP-RT. Main Memory Single VME Slot Configuration - 64 to 256 MB A4503A, A4449A, A6005A) Two VME Slots Configuration - 64 to 1024 MB Artisan Technology Group - Quality Instrumentation ...
  • Page 14 Battery backed real-time clock Interval timers (one 32-bit and two 16-bit) Watchdog timer Operating System HP-UX 10.20 or later, or HP-RT 3.01 patch or later User Interface HP VUE graphical user interface (HP-UX) HP CDE graphical user interface (HP-UX) HP-RT...
  • Page 15 Optional Graphics Onboard (A4500A option 120) PMC Visualize-EG Graphics Card (A4979A) Note: A maximum of four graphics displays are allowed with HP-UX 10.10 ACE and later releases, a maximum of one graphics display with HP-RT. Main Memory Single VME Slot Configuration - 64, 128, or 256 MB (A4503A, A4449A or...

  • Page 16: Supported Configurations

    GSC+ card is added in the secondary GSC+ slot. Three RAM cards can be used in the primary stack. If more than one RAM card is used in either stack, the optional HP 4262A GSC Expansion Kit or A4504A PMC Bridge Adapter (HP-UX only) must be installed; then the board computer will occupy two VME slots in a VME chassis.

  • Page 17: System Graphics

    • 60 Hz With the D8900A monitor, HP-UX 10.20 ACE or 11.00, and the A4267A graphics card or Model 743 onboard graphics, these resolutions are not supported. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 18: Model 743 And Model 744 External Devices

    Keyboard and Mouse The Model 743 and Model 744 support the mouse with mini-DIN connector (PS/2) and key- board with mini-DIN connector (PS/2) included in the HP A4030D Localization Kit. Model 743 and Model 744 Cables Table 1-5 and Table 1-6 show the part numbers for standard cables and conversion cables used to interface with the Model 743 and Model 744 I/O backplanes.
  • Page 19 Model 743 and Model 744 VME Board Computers Table 1-6 Model 743 and Model 744 Conversion Cables Product Interface Cable Type Number HP A4300A HP parallel High-density 25-pin to standard 25-pin female HP A4301A RS-232 High-density 9-pin to standard 9-pin male HP A4302A...

  • Page 20: Model 743 And Model 744 Functional Description

    The system board contains the following functionality: • Boot ROMs • CPU • Graphics • I/O controller, which controls these interface circuits: • Audio • HP Parallel • LAN • RS-232-C • SE SCSI • Keyboard and mouse • Battery-backed Real Time/Time-of-Day clock •...
  • Page 21 General Information Model 743 and Model 744 VME Board Computers PCMCIA Connector GSC Bus Connector CPU (under heatsink) VME Controller Video RAM RAM Card Connectors (optional onboard graphics) I/O Controller Boot ROM RAM Card Connectors EEPROM Optional Onboard Graphics Controller Figure 1-2 Model 743 VME Board Computer Functional Components PCMCIA Connector...
  • Page 22 General Information Model 743 and Model 744 VME Board Computers Figure 1-4 illustrates the functional architecture of the Model 743 system board. Figure 1-4 Model 743 Functional Block Diagram 1-13 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 23: Model 744 Block Diagram

    General Information Model 743 and Model 744 VME Board Computers Model 744 Block Diagram Figure 1-5 illustrates the functional architecture of the Model 744 system board. Backplane P2 Connector Backplane P1 Connector Connector Slot 2 Backplane Bus Power Power Card 64–256 MB Reserved Connector GSC Bus...

  • Page 24: Cpu Circuit

    Hewlett-Packard PA-RISC PA7300-LC CPU chip. The CPU chip is the heart of the CPU circuit. It executes instructions and controls the other circuits. Table 1-7 lists the CPU performance figures of the Model 743 with HP-UX and Table 1-7 lists the CPU performance figures for the Model 744 with HP-UX.

  • Page 25: Boot Rom Circuit

    If a keyboard is not found in this search list, graphics are not enabled. Table 1-9 summarizes the graphics performance figures for the Model 743 with HP-UX and Table 1-9 summarizes the graphics performance figures for the Model 744 with HP-UX.

  • Page 26: Model 743 Memory Controller Circuit

    General Information Model 743 and Model 744 VME Board Computers Table 1-10 Model 744 Graphics Performance On-board 132 MHz 165 MHz HP Visualize-EG Graphics X11 Lines 5.74M Xmark93 33.11 36.47 PLBsurf93 49.7 PLB wire93 116.1K 135.4K 2D/3D vectors/sec 3.1M Model 743 Memory Controller Circuit The CPU’s memory controller circuit manages memory.

  • Page 27: Led Displays

    VME services OK I/O Controller ASIC I/O control by the system board’s I/O controller ASIC includes the following interfaces: • Audio • AUI LAN • HP Parallel • PS/2 Ports 0 and 1 • RS-232 Port A • Single-Ended SCSI • Speaker The battery-backed real-time clock is also implemented in the I/O controller ASIC.
  • Page 28 2.5 K 11-bit samples/sec RS-232 460.8 Kbps SE SCSI 5 MB/second Synchronous 1.5 MB/second Asynchronous * Not supported in HP-RT Table 1-13 summarizes I/O performance figures for the Model 744 Table 1-13 Model 744 I/O Performance I/O Type Performance Notes Audio *...
  • Page 29 16-bit coder-decoder (CODEC) over a frequency range of 25-20,000 Hz. A stereo headphone mini-plug (8 ohms impedance) provides output. The ste- reo line-in and mono microphone mini-plugs provide input with the HP A4302A Audio Cable.
  • Page 30 AUI LAN ment Unit Interface (AUI) version is used; no BNC connector is provided for ThinLAN. The AUI connector enables connections to an external MAU using the HP A4303A adapter cable. Table 1-15 summarizes the LAN AUI interface specifications. Table 1-15...
  • Page 31 VME controller ASIC controls port B. Each supports CTS/RTS hardware handshaking. An HP A4301A adaptor cable is required to convert it to a standard PC compatible, 9-pin male D-sub. The maximum baud rate listed in Table 1-18 is the hardware limit. Actual transfer rates depend upon the operating system and application load.

  • Page 32: Vme Controller Asic

    General Information Model 743 and Model 744 VME Board Computers VME Controller ASIC A VME controller ASIC, with the VME backplane it plugs into, manages the board com- puter’s interface to the VMEbus. The VME controller ASIC also controls the RS-232 B port interface.
  • Page 33 16 bits, cascadeable into timer 3 Timer 3 length 16 bits The VME controller ASIC also includes a watchdog timer used with the Watchdog Timer HP-RT operating system. 1-24 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 34: I/O Expansion

    I/O cards. The PMC bridge adapter (for HP-UX systems only) occupies an additional VME slot directly above or adjacent to the board computer, and has two sites for industry standard +5V signalling PMC cards. The PMC expansion adapter occupies another VME slot adjacent to or above the PMC bridge adapter, and provides two additional sites for PMC cards.

  • Page 35: I/O Expansion Block Diagrams

    General Information Model 743 and Model 744 VME Board Computers I/O Expansion Block Diagrams Figure 1-6 illustrates the functional architecture of the PMC adapters, and Figure 1-7 illus- trates the functional architecture of the GSC adapter. Figure 1-6 PMC Adapters Block Diagrams Figure 1-7 GSC Adapter Block Diagram 1-26...

  • Page 36: Model 748 Ruggedized Workstation

    • Model 748/132L Ruggedized Workstation • Model 748/165L Ruggedized Workstation The 748/132L and 748/165L model incorporates the HP 744/132L and HP 744/165L VME Board Computers that are based on the PA-RISC 7300LC central processing unit (CPU). All models provide a variety of interface, graphics, mass storage, and accessory card configura- tions.
  • Page 37 • HP A5006A 9 GB SE SCSI Hard Drive Upgrade • HP A2643A 2 - 4 GB DDS (DDS-1, 2 GB native, 4 GB with data compression) Tape Drive Upgrade • HP A4307A 4-8 GB DDS (DDS-2, 4 GB native, 8 GB with data compression) Tape Drive Upgrade •...
  • Page 38 General Information Model 748 Ruggedized Workstation NOTE: Only one of the Human Interfaces (HP-HIL or PS/2) can be used at a time. Use of one interface excludes the other interface. Table 1-26 Supported EISA Accessory Cards Product Quantity Product Name...

  • Page 39: Model 748 Ruggedized Workstation Functional Description

    General Information Model 748 Ruggedized Workstation Model 748 Ruggedized Workstation Functional Description The section that follows contains a block diagram of the Model 748 Ruggedized Workstation and describes EISA bus performance. The ideal slave read/write transfer rate is 25/25 MB/sec. EISA Bus Performance Block Diagram Figure 1-8 shows the functional architecture of the Model 748 workstation.

  • Page 40: Environmental Specifications For Monitors

    General Information Model 748 Ruggedized Workstation Environmental Specifications for Monitors This section describes the environmental specifications for the HP D2806A, HP A4490D, and HP A4331A/D color monitors. Table 1-27 lists the operating, non-operating or storage, and recommended specifications for altitude, humidity, and temperature for the monitors.

  • Page 41: Original Equipment Manufacturer (Oem) Support Overview

    Hewlett-Packard Sales and Service Office: • Customer support programs for servicing Hewlett-Packard products • System/product hardware/software configurations • System support options, including the following: • HP SupportLine electronic support • License to use software updates • Media and document updates • On-site response...

  • Page 42: References

    References This chapter lists the titles and part numbers for hardware and software manuals associated with the Model 743/744 and Model 748. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 43: Hp Hardware Manuals

    Table 2-1 lists the hardware installation guides available for the Model 743 and Model 748. Table 2-1 System Installation/Owner’s Manuals Manual Title Part Number HP Model 743 VMEbus Board Computer Owner’s Guide A2636-90603 HP Model 744 VMEbus Board Computer Owner’s Guide A4511-90606 HP Model 748 Workstation Owner’s Guide...

  • Page 44: Diagnostic Manuals

    5960-3163 port Tools PA-RISC Support Tools Manual for HP Employees 5960-3165 Support Tools Manager User’s Manual; HP 9000 Series 700 and 800 5961-1612 HP Apollo 9000 Series 700 Diagnostics Manual, Volume 1 09740-90041 HP Apollo 9000 Series 700 Diagnostics Manual, Volume 2 09740-90043 HP Apollo 9000 Series 700 Support Tape/CD-ROM User’s Manual...

  • Page 45: Hp Software Manuals

    Model 748. Table 2-5 Software Development Manuals Manual Title Part Number HP-UX 9.05 Device Drivers A2636-90020 VME Services HP-UX 10 A4412-90022 Driver Writing in the HP-RT Environment B5487-90003 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 46: Quality

    Quality The Quality Chapter discusses safety compliance programs, electromagnetic compatibility programs, climatic and dynamic environmental tests, acoustics levels, statistical reliability, and manufacturing quality programs. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 47: Safety Compliance Programs

    Quality Safety Compliance Programs Safety Compliance Programs The sections that follow describe the Underwriter’s Laboratories, Canadian Standards Asso- ciation, and TUV Rheinland programs. Introduction Models 743, 744, and 748 are designed, manufactured, and marketed in compliance with the published safety standards stated below. Validation testing was done with one unit represen- tative of the product shipped to the customer.

  • Page 48: Electromagnetic Compatibility Programs

    Quality Electromagnetic Compatibility Programs Electromagnetic Compatibility Programs The sections that follow discuss the Federal Communications Commission, European Com- munity, and Voluntary Control Council for Interface standards bodies. Introduction Models 743, 744 and 748 comply with published standards for Electromagnetic Compatibil- ity (EMC).

  • Page 49: Overview

    Quality Electromagnetic Compatibility Programs Overview The sections that follow summarize the Electromagnetic Compatibility Programs. The fol- lowing is a list of those programs: 1 Electromagnetic field emissions test suite • Radiated emissions (Table 3-1) • Conducted emissions (Table 3-2) • Magnetic emissions (Table 3-3 and Table 3-4) Electromagnetic field immunity/susceptibility test suite •...
  • Page 50 Table 3-3 summarizes the magnetic emissions tests while the equipment is not operating. Table 3-3 Magnetic Emissions Tests While Non-Operating Standard Level HP Standard 765.006 complies with CFR49 <2 milligauss at 2.1 m IATA Dangerous Goods Regulations, 30ed Table 3-4 summarizes the magnetic emissions tests during operation. Table 3-4...

  • Page 51: Line Transients Immunity/Susceptibility Test Suite

    Table 3-7 summarizes the magnetic field immunity tests. Table 3-7 Magnetic Field Immunity Standard Level HP Standard 765.001 317 A/m IEC 801-8 level 5 100 A/m Line Transients Immunity/Susceptibility Test Suite This section summarizes the Line Transients Immunity/Susceptibility Test Suite.
  • Page 52 Quality Electromagnetic Compatibility Programs Table 3-12 summarizes the line surge test. Table 3-12 Line Surge Standard Level HP Standard 765.003 500 ms, 25% surge Table 3-13 summarizes the line blackout/dropout test. Table 3-13 Line Blackout/Dropout Standard Level HP Standard 765.003 20 ms Table 3-14 summarizes the line brownout test.

  • Page 53: Climatic And Dynamic Environmental Ruggedness

    Quality Climatic and Dynamic Environmental Ruggedness Climatic and Dynamic Environmental Ruggedness The sections that follow summarize the climatic and dynamic environmental tests suites. Introduction Models 743, 744 and 748 are designed for use in an environment that involves moderately high and low temperatures, humidity variations, and occasional vibration. Many of the test limits the workstations are subjected to during development are more severe than those docu- mented.

  • Page 54: Temperature, Humidity, And Altitude Test Suite

    Table 3-16 and Table 3-17 summarize the temperature tests suite. Table 3-16 Temperature Tests While Non-Operations Standard Level HP class B1 (IEC 654 Part 1 class C3 compatible) -40 Deg C to 71 Deg C (-40 Deg F to 159.8 Deg F) Table 3-17...
  • Page 55 Climatic and Dynamic Environmental Ruggedness Table 3-22 summarizes the vibration tests suite. Table 3-22 Vibration Tests While Non-Operating Standard Level HP Standard 759 (class B1)(exceeds IEC 654-3/VH2) 7.4 m/s (0.75 g 0-p) swept sine Packaging tests 4.9 m/s (0.5 g 0-p)

  • Page 56: Acoustics

    Sound Power Levels Equipment Under Test Conditions, Procedures, and Standard Level Measurements (Acceptance Criteria) HP Environmental Model 748: 6.22 Bels Fan(s) operating at high speed. tests, Section 767 Model 748: 5.72 Bels Fan(s) operating at low speed. 3-11 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 57: Statistical Reliability

    Quality Statistical Reliability Statistical Reliability The sections that follow explain the Annualized Failure Rate (AFR) and the Mean Time Between Failure (MTBF) computations. Annualized Failure Rate Projections Estimated AFR is based on a parts count and the failure rates of those parts in similar prod- ucts.
  • Page 58 Quality Statistical Reliability The H-MTBF numbers in the following tables are rounded to the nearest 100 hours. Table 3-27 Model 748 Ruggedized Workstation With Model 743 CPU AFR Projections (%/Year) Projected Hardware Configurations AFR (%/Yr.) 743 VME Board Computer, 32 MB RAM (two 16 MB cards), no 11.5 on-board graphics Option...
  • Page 59 Quality Statistical Reliability Table 3-30 Model 744 VME Board Computer AFR Projections (%/Year) Projected Hardware Configurations AFR (%/Yr.) 744 VME Board Computer with on-board graphics option Memory 32 MB RAM card (one card using 16Mbit DRAM) 64 MB RAM card (one card using 16Mbit DRAM) 1.23 128 MB RAM card (one card using 64Mbit DRAM) Option...

  • Page 60: Mechanical Information

    Mechanical Information This chapter contains mechanical information about the components of the Model 743 and Model 744 VME Board Computers and the Model 748 Ruggedized Workstation. Included is air flow requirements, interface connector manufacturing data, system board and accessory card dimensions, chassis and module dimensions and weights, mounting and support, and mechanical drawings.

  • Page 61: Model 743 And Model 744 Vme Board Computers

    Mechanical Information Model 743 and Model 744 VME Board Computers Model 743 and Model 744 VME Board Computers Key Components Figure 4-1 shows key components on the Model 743 VME Board Computer. PCMCIA Connector GSC Bus Connector CPU (under heatsink) VME Controller Video RAM RAM Card Connectors...
  • Page 62 Mechanical Information Model 743 and Model 744 VME Board Computers Figure 4-2 shows key components on the Model 744 VME Board Computer. PCMCIA Connector GSC Bus Connector CPU (under heatsink) VME Controller EEPROM IODC RAM Card Connectors I/O Controller Audio CODEC Video RAM (optional onboard graphics) Optional Onboard...

  • Page 63: Air Flow Requirements

    Mechanical Information Model 743 and Model 744 VME Board Computers Air Flow Requirements The air flow requirements for the Model 743 and Model 744 are as follows: 46 linear meters (150 linear feet) per minute, -5 Deg C to 35 Deg C (23 Deg F to 95 Deg F) 61 linear meters (200 linear feet) per minute, 35 Deg C to 55 Deg C (95 Deg F to 151 Deg F) NOTE: Model 743 and Model 744 VME Board Computers are to be operated only in an environment...
  • Page 64 Mechanical Information Model 743 and Model 744 VME Board Computers = 95 (744/132L) = 102 (744/165L) = 85 = 100 = 85 = 75 = Maximum junction temperature in degrees centigrade = Maximum case temperature in degrees centigrade Figure 4-4 Model 744 Integrated Circuit Case Temperature Limits Artisan Technology Group - Quality Instrumentation ...

  • Page 65: Interface Connectors

    Table 4-1 Interface Connector Manufacturing Data Manufacturing Connector Manufacturing Part Number Data Audio ITT Canon MDSM-9PE-Z10 or equivalent HP Parallel ITT Canon MDSM-25PE-Z10 or equivalent Mouse/Keyboard 750071-1 or equivalent 215606-4 or equivalent 650988-0 or equivalent SCSI II 749830-5 or equivalent...

  • Page 66: Mechanical Dimensions

    Mechanical Information Model 743 and Model 744 VME Board Computers Mechanical Dimensions Figure 4-5 and Figure 4-6 show the dimensions of the Model 743 board computer. Figure 4-5 Model 743 Board Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 67 Mechanical Information Model 743 and Model 744 VME Board Computers Figure 4-6 Model 743 Board Computer (Continued) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 68 Mechanical Information Model 743 and Model 744 VME Board Computers Figure 4-7 shows the dimensions of a Model 743 RAM card. Figure 4-7 Model 743 RAM Card Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 69 Mechanical Information Model 743 and Model 744 VME Board Computers Figure 4-8 through Figure 4-12 show the dimensions of the Model 744 system board. Figure 4-8 Model 744 Board Computer 4-10 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 70 Mechanical Information Model 743 and Model 744 VME Board Computers Figure 4-9 Model 744 Board Computer (Continued) 4-11 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 71 Mechanical Information Model 743 and Model 744 VME Board Computers Figure 4-10 Model 744 Board Computer (Continued) 4-12 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 72 Mechanical Information Model 743 and Model 744 VME Board Computers Figure 4-11 Model 744 Board Computer (Continued) 4-13 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 73 Mechanical Information Model 743 and Model 744 VME Board Computers Figure 4-12 Model 744 Board Computer (Continued) 4-14 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 74 Mechanical Information Model 743 and Model 744 VME Board Computers Figure 4-13 through Figure 4-15 show the dimensions of a Model 744 RAM card. Figure 4-13 Model 744 RAM Card Figure 4-14 Model 744 RAM Card (Continued) 4-15 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 75 Mechanical Information Model 743 and Model 744 VME Board Computers Figure 4-15 Model 744 RAM Card (Continued) 4-16 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 76 Mechanical Information Model 743 and Model 744 VME Board Computers Figure 4-16 shows the dimensions of a GSC+ accessory card. Figure 4-16 GSC Accessory Card 4-17 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 77 Mechanical Information Model 743 and Model 744 VME Board Computers Figure 4-17 shows the dimensions of the PMC Bridge Adapter. Figure 4-17 PMC Bridge Adapter 4-18 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 78 Mechanical Information Model 743 and Model 744 VME Board Computers Figure 4-18 shows the dimensions of the PMC Expansion Adapter. Figure 4-18 PMC Expansion Adapter 4-19 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 79: Model 748 Chassis And Modules

    Mechanical Information Model 748 Chassis and Modules Model 748 Chassis and Modules Figure 4-19 shows the dimensions of the Model 748 chassis. Figure 4-19 Model 748 Main Chassis 4-20 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 80 Mechanical Information Model 748 Chassis and Modules Figure 4-20 shows the dimensions of the Model 748 outside wall. Figure 4-20 Model 748 Outside Wall Figure 4-21 shows the dimensions of Model 748 center wall. Figure 4-21 Model 748 Center Wall 4-21 Artisan Technology Group - Quality Instrumentation ...
  • Page 81 Mechanical Information Model 748 Chassis and Modules Figure 4-22 shows the dimensions of the Model 748 mass storage module chassis. Figure 4-22 Model 748 Mass Storage Module Chassis 4-22 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 82 Mechanical Information Model 748 Chassis and Modules Figure 4-23 shows the dimensions of the Model 748 VME module chassis. Figure 4-23 Model 748 VME Module Chassis 4-23 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 83 Mechanical Information Model 748 Chassis and Modules Figure 4-24 shows the dimensions of the Model 748 PCI/EISA module chassis. Figure 4-24 Module 748 PCI/EISA Module Chassis 4-24 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 84 Mechanical Information Model 748 Chassis and Modules Figure 4-25 shows the dimensions of the Model 748 EISA converter board. Figure 4-25 Model 748 EISA Converter Board Figure 4-26 shows the dimensions of the Model 748 PCI converter board. Figure 4-26 Model 748 PCI Converter Board 4-25 Artisan Technology Group - Quality Instrumentation ...
  • Page 85 Mechanical Information Model 748 Chassis and Modules Figure 4-27 shows the dimensions of the Model 748 VME backplane board. Figure 4-27 Model 748 VME Backplane Board Figure 4-28 shows the dimensions of the Model 748 power distribution board. Figure 4-28 Model 748 Power Distribution Board 4-26 Artisan Technology Group - Quality Instrumentation ...

  • Page 86: Weights

    Mechanical Information Model 748 Chassis and Modules Weights Table 4-2 lists the weights of the components of the Model 748 workstation. Table 4-2 Weights of Model 748 Workstation Product and Modules Metric English Part Name Weight Weight Model 748 Ruggedized Workstation chassis including power distribution board, 9.50 Kg 21 lbs.

  • Page 87: Mounting And Support

    Mechanical Information Model 748 Chassis and Modules Mounting and Support Each Model 748 workstation is shipped with a rack mount kit including flanges, spacers, and screws. In this section, the term "back" refers to the cable-out side of the workstation. Model 748 satisfies three rack mount orientations: •...

  • Page 88: Chassis Parts And Models

    Mechanical Information Model 748 Chassis and Modules Chassis Parts and Models Table 4-3 shows the assembly group, included subassemblies, and mechanical drawing refer- ence number for the Model 748 chassis parts and modules. Table 4-3 Mechanical Drawings for Chassis Parts and Modules Subassembly Drawing Assembly Group Included Subassemblies...
  • Page 89 Mechanical Information Model 748 Chassis and Modules 4-30 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 90: Electrical Information

    Electrical Information The Electrical Information Chapter contains information on the connector pinouts, real-time clock battery, and video output signal specifications. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 91 The sections that follow contain figures and tables of the connector pinouts and the wiring tables for video, audio, HP parallel, RS-232, AUI LAN, single-ended SCSI, FW SCSI, PS/2, and VMEbus; specifications for the real-time battery clock, video output signals, and video timing.

  • Page 92: Video Connector Pinouts

    Electrical Information Video Connector Pinouts This section contains a figure of the video connector, a table of the video connector pinouts, the HP4304A conversion video cable connectors diagrams, and the conversion video cable wiring table. Figure 5-1 illustrates the video connector pin locations for the Model 743 and Model 744 I/O backplane.
  • Page 93 Electrical Information Figure 5-2 illustrates the connector pin locations on each end of the HP A4304A conversion video cable. Figure 5-2 HP A4304A Conversion Video Cable Connectors Table 5-5 identifies HP A4304A conversion video cable pins. Table 5-2 A4304A Conversion Video Cable Wiring Table...
  • Page 94 Electrical Information Figure 5-3 illustrates the connector pin locations on each end of the HP A4223A conversion video cable. Figure 5-3 HP A4223A Conversion Video Cable Connectors Table 5-3 identifies HP A4223A conversion video cable pins. Table 5-3 A4223A Conversion Video Cable Wiring Table...
  • Page 95 Electrical Information Figure 5-4 illustrates the connector pin locations on each end of the HP A4305A conversion video cable. WIRING DIAGRAM PIN 15 PIN 8 PIN 10 PIN 30 PIN 9 PIN 1 PIN 1 PIN 21 PIN 11 1.8K Resistor...
  • Page 96 Electrical Information Figure 5-5 illustrates the connector pin locations on each end of the HP A4167A conversion video cable. WIRING DIAGRAM PIN 15 Pin 6 PIN 8 Pin 11 Pin 1 PIN 10 PIN 30 PIN 9 PIN 1 Pin 5...

  • Page 97: Audio Connector Pinouts

    Electrical Information Audio Connector Pinouts This section contains a figure of the audio connector and a table of the audio connector pinouts. Figure 5-6 illustrates the audio connector pin locations. Figure 5-6 Audio Connector Table 5-6 identifies the audio connector pins. Table 5-6 Audio Connector Pinouts Signal...
  • Page 98 Electrical Information Figure 5-7 illustrates the connector pin locations on each end of the HP A4302A conversion audio cable. Figure 5-7 HP A4302A Conversion Audio Cable Connectors Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 99: Hp Parallel Connector Pinouts

    Electrical Information HP Parallel Connector Pinouts This section contains a figure of the HP parallel connector, a table of the HP parallel connec- tor pinouts, the HP4300A conversion HP parallel cable connectors diagrams, and the conver- sion HP parallel cable wiring table.
  • Page 100 Electrical Information Figure 5-9 illustrates the connector pin locations on each end of the HP A4300A conversion HP parallel cable Figure 5-9 HP A4300A Conversion HP Parallel Cable Connectors Table 5-8 identifies the HP A4300A conversion HP parallel cable pins.

  • Page 101: Rs-232 Connector Pinouts

    RS-232 Connector Pinouts This section contains a figure of the RS-232 connector, a table of the RS-232 connector pinouts, the HP 4301A conversion RS-232 cable connectors diagrams, and the conversion RS-232 cable wiring table. Figure 5-10 illustrates the RS-232 connector pin locations.
  • Page 102 Electrical Information Figure 5-11 illustrates the connector pin locations on each end of the HP A4301A conversion RS-232 cable. Figure 5-11 HP A4301A Conversion RS-232 Cable Connectors Table 5-10 is the wiring table for the HP A4301A conversion RS-232 cable.

  • Page 103: Aui Lan Connector Pinouts

    AUI LAN Connector Pinouts This section contains a figure of the AUI LAN connector, a table of the AUI LAN connector pinouts, the HP 4303A conversion AUI LAN cable connectors diagrams, and the conversion AUI LAN cable wiring table. Figure 5-12 illustrates the AUI LAN connector pin locations.
  • Page 104 Electrical Information Figure 5-13 illustrates the connector pin locations on each end of the HP A4303A conversion LAN cable. Figure 5-13 HP A4303A Conversion LAN Cable Connectors Table 5-12 is the wiring table for the HP A4303A conversion LAN cable.

  • Page 105: Single-Ended Scsi Connector Pinouts

    Electrical Information Single-Ended SCSI Connector Pinouts The section that follows contains a figure of the single-ended SCSI connector and a table of the single-ended SCSI connector pinouts. Figure 5-14 illustrates the single-ended SCSI connector pin locations. Figure 5-14 Single-Ended SCSI Connector 5-16 Artisan Technology Group - Quality Instrumentation ...
  • Page 106 Electrical Information Table 5-13 identifies the single-ended SCSI connector pins. Table 5-13 Single-Ended SCSI Connector Pinouts Signal Signal Number Number DATA 0 DATA 1 DATA 2 DATA 3 DATA 4 DATA 5 DATA 6 DATA 7 Data Parity Term_Pwr 5-17 Artisan Technology Group - Quality Instrumentation ...

  • Page 107: Fw Scsi Connector Pinout

    Electrical Information FW SCSI Connector Pinout The section that follows contains a figure of the FW SCSI connector and a table of the FW SCSI connector pinouts. Figure 5-15 illustrates the FW SCSI connector pin locations. Figure 5-15 FW SCSI Connector Table 5-14 identifies the FW SCSI connector pins.
  • Page 108 Electrical Information Table 5-14 FW SCSI Connector Pinouts Signal Signal Number Number FW_SD12+ FW_SD12- FW_SD13+ FW_SD13- FW_SD14+ FW_SD14- FW_SD15+ FW_SD15- FW_SD1+ FW_SP1- FW_SD0+ FW_SD0- FW_SD1+ FW_SD1- FW_SD2+ FW_SD2- FW_SD3+ FW_SD3- FW_SD4+ FW_SD4- FW_SD5+ FW_SD5- FW_SD6+ FW_SD6- FW_SD7+ FW_SD7- FW_SP0+ FW_SP0- FW_DIFFSENS FW_TERM POWER FW_TERM POWER...

  • Page 109: Ps/2 Connector Pinouts

    Electrical Information PS/2 Connector Pinouts The following section contains a figure of the PS/2 connector and a table of the PS/2 connec- tor pinouts. Figure 5-16 illustrates the PS/2 connector pin locations. Figure 5-16 PS/2 Connector Table 5-15 identifies the PS/2 connector pins. Table 5-15 PS/2 Connector Pinouts Signal...

  • Page 110: Vme Connector Pinouts

    Electrical Information VME Connector Pinouts This section contains tables for the Model 743, Model 744, and the Model 748 VMEbus P1/ J1 pin assignments and signal mnemonics; the Model 748 VMEbus P2/J2, slots 2-8, pin assignments and signal mnemonics; the Model 743 and Model 744 VMEbus P2/J2, slot 1 pin assignments and signal mnemonics.
  • Page 111 Electrical Information Table 5-16 Model 743 and 744/Model 748 VME P1/J1 Pin Assignments and Signal Mnemonics Row A Row B Row C Number BBSY BCLR ACFAIL BG0IN BG0OUT BG1IN BG1OUT BG2IN GROUND BG2OUT GROUND SYSCLOCK BG3IN SYSFAIL GROUND BG3OUT BERR SYSRESET LWORD WRITE...
  • Page 112 Electrical Information Table 5-17 identifies the VMEbus connector pin assignments and signal mnemonics for the Model 748 VME P2/J2, slots 2 - 8. Table 5-17 Model 748 VME P2/J2 Pin Assignments and Signal Mnemonics Row A Row B Row C Number User defined +5Vdc...
  • Page 113 Electrical Information Table 5-18 identifies the VMEbus connector pin assignments and signal mnemonics for the Model 743 P2. Table 5-18 Model 743 P2/J2 Pin Assignments and Signal Mnemonics - Slot 1 Row A Row B Row C Number SYNCL +5Vdc GSC_AD[0] SYNCH GSC_AD[1]...
  • Page 114 Electrical Information Table 5-19 identifies the VMEbus connector pin assignments and signal mnemonics for the Model 744 VME P2. Table 5-19 Model 744 VME P2 Pin Assignments and Signal Mnemonics Row A Row B Row C Number SYNCHWAXL +5 V GSC_AD0 SYNCHWAXH GSC_AD1...
  • Page 115 Electrical Information Table 5-19 Model 744 VME P2 Pin Assignments and Signal Mnemonics Row A Row B Row C Number TRST +5 V GSC_AD31 Table 5-29 identifies the PMC JN1 signals on the PMC Bridge J21 connectors. Table 5-20 PMC JN1 Signals (Bridge J21) Signal Signal Number...
  • Page 116 Electrical Information Table 5-20 PMC JN1 Signals (Bridge J21) Signal Signal Number Number VDD(I/O) AD03 AD02 AD01 AD00 Ground REQ64# Table 5-29 identifies the PMC JN2 signals on the PMC Bridge J22 connectors. Table 5-21 PMC JN2 Signals (Bridge J22) Signal Signal Number...
  • Page 117 Electrical Information Table 5-21 PMC JN2 Signals (Bridge J22) Signal Signal Number Number AD07 PMC-RSVD +3.3V PMC-RSVD PMC-RSVD Ground PMC-RSVD PMC-RSVD Ground PMC-RSVD ACK64# +3.3V Ground PMC-RSVD Table 5-28 identifies the PMC JN1 signals on the PMC Bridge J11 connectors. Table 5-22 PMC JN1 Signals (Bridge J11) Signal...
  • Page 118 Electrical Information Table 5-22 PMC JN1 Signals (Bridge J11) Signal Signal Number Number VDD(I/O) AD15 AD12 AD11 AD09 Ground C/BE0# AD06 AD05 AD04 Ground VDD(I/O) AD03 AD02 AD01 AD00 Ground REQ64# Table 5-29 identifies the PMC JN2 signals on the PMC Bridge J12 connectors. Table 5-23 PMC JN2 Signals (Bridge J12) Signal...
  • Page 119 Electrical Information Table 5-23 PMC JN2 Signals (Bridge J12) Signal Signal Number Number PERR# Ground +3.3V SERR# C/BE1# Ground AD14 AD13 Ground AD10 AD08 +3.3V AD07 PMC-RSVD +3.3V PMC-RSVD PMC-RSVD Ground PMC-RSVD PMC-RSVD Ground PMC-RSVD ACK64# +3.3V Ground PMC-RSVD Table 5-25 identifies the PMC JN4 User Defined pin outs on the PMC Bridge J14 connector that is wired to the VME backplane P2 connector.
  • Page 120 Electrical Information Table 5-24 PMC JN4 Pin Outs (Bridge J14) Signal Signal Number Number P2-C16 P2-A16 P2-C17 P2-A17 P2-C18 P2-A18 P2-C19 P2-A19 P2-C20 P2-A20 P2-C21 P2-A21 P2-C22 P2-A22 P2-C23 P2-A23 P2-C24 P2-A24 P2-C25 P2-A25 P2-C26 P2-A26 P2-C27 P2-A27 P2-C28 P2-A28 P2-C29 P2-A29 P2-C30...
  • Page 121 Electrical Information Table 5-25 PMC Bridge J3 Connector Signal Signal Signal Number Number Number GSC-AD0 PCI-AD14 GSC-AD1 PCI-AD15 GSC-AD2 PCI-AD16 GSC-AD3 PCI-AD17 GSC-AD4 58-95 No connect PCI-AD18 GSC-AD5 PCI-RST-L PCI-AD19 GSC-AD6 PCI-SL3-CLK PCI-AD20 GSC-AD7 PCI-FRAME-L PCI-AD21 GSC-AD8 PCI-SL4-CLK PCI-AD22 GSC-AD9 PCI-CBEO PCI-AD23 GSC-AD10...
  • Page 122 Electrical Information Table 5-26 PMC JN1 Signals (Expander J31) Signal Signal Number Number REQC# VDD(I/O) AD31 AD28 AD27 AD25 Ground Ground C/BE3# AD22 AD21 AD19 VDD(I/O) AD17 FRAME# Ground Ground IRDY# DEVSEL# Ground LOCK# SDONE# SBO# Ground VDD(I/O) AD15 AD12 AD11 AD09 Ground...
  • Page 123 Electrical Information Table 5-27 PMC JN2 Signals (Expander J32) Signal Signal Number Number BUSMODE2# +3.3V BUSMODE3 +3.3V BUSMODE4 PCI-RESERVED Ground AD30 AD29 Ground AD26 AD24 +3.3V IDSEL(3) AD23 +3.3V AD20 AD18 Ground AD16 C/BE2# Ground PMC-RSVD TRDY# +3.3V Ground STOP# PERR# Ground +3.3V...
  • Page 124 Electrical Information Table 5-28 PMC JN1 Signals (Expander J41) Signal Signal Number Number INTB# INTC BUSMODE1# INTD# PCI-RESERVED Ground PCI-RESERVED Ground Ground GNTD# REQD# VDD(I/O) AD31 AD28 AD27 AD25 Ground Ground C/BE3# AD22 AD21 AD19 VDD(I/O) AD17 FRAME# Ground Ground IRDY# DEVSEL# Ground...
  • Page 125 Electrical Information Table 5-29 PMC JN2 Signals (Expander J42) Signal Signal Number Number +12V TRST# Ground Ground PCI-RESERVED PCI-RESERVED PCI-RESERVED BUSMODE2# +3.3V BUSMODE3 +3.3V BUSMODE4 PCI-RESERVED Ground AD30 AD29 Ground AD26 AD24 +3.3V IDSEL4) AD23 +3.3V AD20 AD18 Ground AD16 C/BE2# Ground PMC-RSVD...

  • Page 126: Real-Time Clock (Rtc) Battery Information

    Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Video Output Signal Specifications The following input signal specifications are typical for all HP monitors: • Output connector - 15-pin MDSM •...
  • Page 127 Electrical Information Table 5-31 summarizes the timing specifications for the 1024 x 768 and 1280 x 1024 moni- tors at 60 Hz, 75 Hz, and 72 Hz. Table 5-31 Timing Specifications at 60 Hz, 75 Hz, and 72 Hz A4330A/ A4330A/ D2806A D2806A...
  • Page 128 Electrical Information Table 5-32 summarizes the timing specifications for the 1024 x 768 and 1280 x 1024 moni- tors at VESA 75 Hz standard. Table 5-32 Timing Specifications for VESA 75 HZ Standard D2806A A4330A/A4331 Signal 1024x768 1280x1024 75 Hz VESA 75 Hz VESA Horizontal active scan 13.003µs...
  • Page 129 Electrical Information 5-40 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 130: Power Requirements

    Power Requirements This chapter discusses power distribution, monitor ac power specifications, and power bud- geting. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 131: Power Distribution

    Power Requirements Power Distribution Power Distribution The VMEbus chassis connectors P1 and P2 distribute power to the Model 743 and Model 744 board computer’s PC boards as follows: Graphics cards receive power through the adapter board’s P1 and P2 connectors. RAM cards receive power through the RAM stack connectors.
  • Page 132 Power Requirements Power Distribution +12V +5MEM (165 only) DC/DC Figure 6-2 Model 744 Board Computer Power Distribution Diagram Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 133 Power Requirements Power Distribution –12 GSC Card Connector +3.3 –12 –12 GSC Card Connector +3.3 +3.3 –12 GSC Connector Figure 6-3 GSC Expansion Adapter Power Distribution Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 134 Power Requirements Power Distribution –12 PMC Card Connector +3.3 –12 –12 PMC Card Connector +3.3 +3.3 +3.3 +3.3 Regulator –12 PMC Card Connector +3.3 –12 –12 PMC Card Connector +3.3 –12 GSC Connector Figure 6-4 PMC Adapters Power Distribution Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 135: Fw Scsi Estimated Power Consumption

    Power Requirements Power Distribution FW SCSI Estimated Power Consumption Table 6-1 summarizes the estimated power consumption of the FW SCSI adapter. Table 6-1 FW SCSI Power Dissipation +5 V +3 V +12 V -12 V HW Component Current Current P-total Current Current (VDD0)

  • Page 136: Power Budgeting

    Power Requirements Power Distribution Power Budgeting If your workstation’s application requires several accessory cards and mass storage devices, power budgeting may be required. Power budgeting ensures that the power needed for the following internal devices does not exceed the power available: •...
  • Page 137 Power Requirements Power Distribution c Inactive memory banks are those banks on cards in your configuration in addition to the worst case active memory banks. They must also be added to the calculation. d Fill in the information in Table 6-3 or Table 6-4. Slot 3 Slot 2 Memory Slots...
  • Page 138 Power Requirements Power Distribution 3 Write in the board computer’s current requirements in the line provided for VME slots 1 and 2 in the Lower Power Supply Worksheet (Table 6-9). 4 Determine each device’s current requirements from the Internal Device Requirements ta- ble and the VME accessory card’s specifications sheet (Table 6-7).
  • Page 139 Power Requirements Power Distribution Table 6-5 Model 744 Current Requirements Worksheet +5V dc +12V dc -12V dc Each Model 744 Board Computer Amps Amps Amps If 132 MHz, current for +5V dc is 4.7A _______ 0.1A 0.1A If 165 MHz, current for +5V dc is 6.3A RAM cards (see Table 6-3 or Table 6-4) ________ Graphics subsystems...
  • Page 140 0.09 A 0.05 A HP J2159A X.25 PSI 3.4 A 0.04 A HP J2165A LAN 2.1 A HP J2645AA VG Any LAN 0.3 A HP J2802B ATM 6-11 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 141 Power Requirements Power Distribution Table 6-8 Upper Power Supply Current Budgeting Worksheet +5V dc +12V dc -12V dc Location Device Amps Amps Amps VME Slot 8 VME Slot 7 VME Slot 6 VME Slot 5 VME Slot 4 VME Slot 3 or PMC cards in Expansion Adapter* Total Current Required:...
  • Page 142 Power Requirements Power Distribution Table 6-9 Lower Power Supply Current Budgeting Worksheet +5V dc +12V dc -12V dc -5.2V dc Location Device Amps Amps Amps Amps Mass Storage Device 1 Mass Storage Device 2 Mass Storage Device 3 Mass Storage Device 4 VME Slot 2 Model 743/...
  • Page 143 Power Requirements Power Distribution 6-14 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 144: Product Design Considerations

    Product Design Considerations The Product Design Considerations Chapter contains information on applications and sys- tem integration. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 145: Application Information

    This section contains information on VME Services updates and VME system design consid- erations. VME Services Updates At HP-UX release 10.10 and later, VME Services ships as part of the standard operating sys- tem. For HP-UX release 9.05 and 9.07, updates to HP-UX Version 9.05 VME Services are avail- able from Hewlett-Packard.

  • Page 146: System Integration

    However, if there is no local mem- ory defined on an HP-RT processor, the Model 742’s default is still in place. This can lead to a conflict if another memory area is assigned that overlaps the Model 742’s defaults.
  • Page 147 Model 743/744 ’s bus, resulting in an HP-UX panic and system crash. In HP-UX, this parity error results in a non-zero value of the bus check displayed as part of HP-UX panic. The HP-RT error message indicates that the...
  • Page 148 The system must be configured so that Models 742 or 747 always get the VME bus and com- plete the first transaction in less than 1 ms. This is done through vme_config in HP-UX, and by setting specific defines, such as bus request priority, to set bus behavior in HP-RT.
  • Page 149 Product Design Considerations Application Information Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 150 4-6 safety compliance 3-2 conversion audio cable 5-9 interval timers 1-24 PS/2 ports 1-22 conversion cables 1-9, 4-28 conversion HP parallel cable 5-11 conversion LAN cable 5-15 key components quality 3-1 conversion RS-232 cable 5-13 Model 743 4-2...
  • Page 151 Index acoustics 3-11 altitude 3-9 brownout 3-7 brownout/recovery 3-7 climatic and environmental 3-8 conducted immunity 3-6 electrical fast transients 3-6 electromagnetic field emissions 3-4 electromagnetic field immunity/susceptibili- ty 3-5 electro-static discharge 3-5 humidity 3-9 line blackout/dropout 3-7 line surge 3-7 line transients immunity/susceptibility 3-6 magnetic emissions 3-5 magnetic field immunity 3-6...
  • Page 152 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...

This manual is also suitable for:

744 series744rt/165l744/132l744rt/132l743i/64743i/100 ... Show all

Table of Contents