hit counter script
Sony HDCU1000 Installation Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Control Unit
  5. HDCU1000
  6. Installation manual

Sony HDCU1000 Installation Manual

Hd camera control unit
Hide thumbs Also See for HDCU1000:
Table of Contents

Advertisement

Quick Links

See also: Maintenance Manual , Operating Manual
HD CAMERA CONTROL UNIT
HDCU1000
HDCU1080
HDCU1500
SD ENCODER UNIT
HKCU1001
MULTI INTERFACE UNIT
HKCU1003
SDI OUTPUT EXPANSION UNIT
HKCU1005
INSTALLATION MANUAL
1st Edition (Revised 4)
Serial No. 10001 and Higher : HDCU1000 (UC)
Serial No. 30001 and Higher : HDCU1000 (J)
Serial No. 40001 and Higher : HDCU1000 (CE)
Serial No. 50001 and Higher : HDCU1000 (E3)
Serial No. 60001 and Higher : HDCU1000 (E2)
Serial No. 50001 and Higher : HDCU1080 (CN)
Serial No. 10001 and Higher : HDCU1500 (SY)
Serial No. 30001 and Higher : HDCU1500 (J)

Advertisement

Table of Contents
loading

Related Manuals for Sony HDCU1000

Summary of Contents for Sony HDCU1000

  • Page 1 SDI OUTPUT EXPANSION UNIT HKCU1005 INSTALLATION MANUAL 1st Edition (Revised 4) Serial No. 10001 and Higher : HDCU1000 (UC) Serial No. 30001 and Higher : HDCU1000 (J) Serial No. 40001 and Higher : HDCU1000 (CE) Serial No. 50001 and Higher : HDCU1000 (E3) Serial No.
  • Page 2 Follow the instructions for the above port(s). When this product is installed in a rack, please make sure that the rack does not achieve hazardous condition due to uneven mechanical loading. . IM/HDCU1000 Series...

  • Page 3: Table Of Contents

    1-10-2. HDCU1080 ........... 1-31 (E) via Ethernet set ..........3-3 (E) 1-10-3. HDCU1500 ........... 1-32 (E) 1-11. Installing in 19-inch Rack (HDCU1000/1080) ..1-33 (E) 1-12. Cleaning of Connector/Cable ........ 1-36 (E) 1 (E) . IM/HDCU1000 Series...
  • Page 4 Configuration Menu ..........3-16 (E) 3-4-1. When version of the software prior to V1.10 ............3-16 (E) 3-4-2. When V1.10 or a later version of the software ..........3-20 (E) 3-5. Network Setting Menu ........... 3-26 (E) 2 (E) . IM/HDCU1000 Series...

  • Page 5: Manual Structure

    Beside this Installation Manual, the following manuals are available for the unit. . Operation Manual (Supplied with HDCU1000/1500) This manual describes how to operate the HDCU1000/1500. . Operation Manual (Supplied with HDCU1080) This manual describes how to operate the HDCU1080.

  • Page 7: Installation Overview

    If the version is lower than the following one, the ROM needs to be replaced and the software needs to be upgraded. In this case, contact your local Sony Sales Office/Service Center. Peripheral equipment Board Ref.

  • Page 8: Connectors And Cables

    ± 0.3 V, ternary SYNC, 75 Z 0.3 V p-p, SD SYNC, 75 Z selectable ..CHARACTER : BNC 1.0 V p-p, 75 Z ..AES/EBU : BNC AES/EBU format 1-2 (E) . IM/HDCU1000 Series...
  • Page 9 DIGITAL AUDIO (AES/EBU) CAMERA COMMAND PIX OUT : BNC PROMPTER 1.0 V p-p, 75 Z WF REMOTE (D-sub 15P, Female) (HDCU1000/1080) WF OUT : BNC 0.714 V p-p, 75 Z (NTSC) 0.7 V p-p, 75 Z (PAL) ENC : 1.0 V p-p...
  • Page 10 I/O PORT (D-sub 15P, Female) (HDCU1000/1080) MIC1/MIC2 (XLR 3P, Male) _ _ _ _ _ EXT VIEW _ _ _ _ _ _ _ _ _ _ EXT VIEW _ _ _ _ _ Signal Specifications (0 dBu = 0.775 Vrms)
  • Page 11 GND for TX *6 : Stair Case signal RCP POWER, +30 V POWER (+) OUT POWER (_) OUT GND for POWER VIDEO (X) 75Z, 1.0 V p-p DC 0 ±2 V CHASSIS GND CHASSIS GND 1-5 (E) . IM/HDCU1000 Series...

  • Page 12: Cable Wiring Diagram

    PGM2 (G) IN S503/AVP board) AUX4 _ 8P CONNECTOR (MALE) _ (WIRING SIDE) AUX5 G TALLY (X) IN ON : 24 Vdc, TTL (H), SHORT G TALLY (Y) IN OFF : 0 Vdc, TTL (L), OPEN 1-6 (E) . IM/HDCU1000 Series...

  • Page 13: Connection Connectors

    HD SDI (1-4) For the cleaning procedure, refer to Section 1-12, “Clean- SD SDI (1-4) ing of Connector/Cable”. (BNC) . CAMERA connector of the unit . CCU connector of the camera side . Optical/electric signal composite cable 1-7 (E) . IM/HDCU1000 Series...

  • Page 14: Circuit Boards And Main Parts Layouts

    8 AT-167 board board 60001 and Higher (HDCU1000: E2) 9 AVP-6 board !, DRX-5 board !/ DTX-5 board !. CN-2700 board * : HKCU1003 is the option board for HDCU1000. It is not used for HDCU1080. 1-8 (E) . IM/HDCU1000 Series...

  • Page 15: Circuit Boards And Main Parts Layouts (Hdcu1500)

    5 DTX-5 board ![ CN-2676 board VDA-64A board (HKCU1003) 6 DRX-5 board !] CN-2675/2675G board VDA-64B board (HKCU1003) 7 VIF-34B/34BG board !\ SDP-12 board VDA-64C board (HKCU1003) 8 ADO-10/10G board !; CNB-22/22G board HIF-26 board (HKCU1005) 1-9 (E) . IM/HDCU1000 Series...

  • Page 16: External Dimensions

    1. Loosen the two screws with stopper and open the front panel in the direction of the arrow. Front panel Screw with stopper Screw with stopper 2. Reattach the front panel in reverse order of step 1. 1-10 (E) . IM/HDCU1000 Series...

  • Page 17: Installing The Rm-B750

    CN14 2. Loosen the four screws with stopper and open the front panel and the rear panel in the direction of the respec- tive arrows. Rear panel Front panel Screws with stopper Screws with stopper 1-11 (E) . IM/HDCU1000 Series...
  • Page 18 7. Flexible card wires S206 Potbellied hole Screw with stopper 13. Upon completion of front panel installation, check that the switch S206 (CCU-PW) on the MPU-124 board of the RM-B750 is ON. B3 x 6 1-12 (E) . IM/HDCU1000 Series...

  • Page 19: On-Board Indicator/Switch/Volume Functions

    Adjusts the level phase for the reference signal in steps. S404 V-Phase Adjusts the vertical phase for the reference signal in line steps. * : This function has been added to software V1.10 and the later versions. 1-13 (E) . IM/HDCU1000 Series...
  • Page 20 ON : Can only be controlled from RCP (PIX/WF 1 system). When there is PIX/WF 2 system, it can be controlled from MSU. OFF : Can be controlled from either MSU or RCP. (Latest priority) 1-14 (E) . IM/HDCU1000 Series...
  • Page 21 _ : NPN : NPN open collector output * : This function has been added to software V1.10 and the later versions. *1 : This function has been added to software V1.20 and the later versions. 1-15 (E) . IM/HDCU1000 Series...
  • Page 22 * Can also perform remote/local setting of video output format from CCU. RV701 27M FREQ Volume that adjusts the free-run frequency of 27M-VCO (X701). Must be readjusted when replacing X701. RV702 CK-DUTY Volume that adjusts the clock duty of the 74 MHz clock. 1-16 (E) . IM/HDCU1000 Series...
  • Page 23 UNBALANCE Select ON/OFF according to the headset microphone type connected to the INCOM connector on the front panel. ON: For the unbalanced type (UNBALANCE) OFF: For the balanced type INTERCOM Refer to the Operation Manual. 1-17 (E) . IM/HDCU1000 Series...
  • Page 24 Select ON/OFF according to the headset microphone type connected to the OFF INCOM connector on the front panel. ON: For the unbalanced type (UNBALANCE) OFF: For the balanced type INCOM Refer to the Operation Manual. 1-18 (E) . IM/HDCU1000 Series...
  • Page 25 Red tally Green tally Switch Signal standard POWER/ POWER/TTL POWER/ POWER/TTL CONTACT CONTACT Contact supply CONTACT CONTACT 24 V power supply POWER POWER POWER POWER 5 V power supply POWER POWER U-TALLY Not used CONTACT (POWER/CONTACT) 1-19 (E) . IM/HDCU1000 Series...
  • Page 26 Selects the intercom system of the engineer line. S601 ENG SEL2 S603 S601 4-Wire Clear-Com * When 4-Wire is selected, S601 can be set to RTS or CC. RV500 MIC1 LEV RV501 MIC2 LEV RV600 PROD 2WIRE CANCEL RV601 ENG 2WIRE CANCEL 1-20 (E) . IM/HDCU1000 Series...
  • Page 27 ON: Interlocks the format of the SDI output (3, 4) to (1, 2). Settings are for each DRX board. The settings are invalid for the third and the later DRX boards. (Always format-interlocked.) 3 to 8 Not used 1-21 (E) . IM/HDCU1000 Series...
  • Page 28 MONI LEV Adjusts the output level of the character monitor signal. SDP-12 board S402 S401 SDP-12 (Side A) Ref.No. Name Function Factory default setting S401 1-8 Factory Use Only OFF (ALL) S402 Factory Use Only 1-22 (E) . IM/HDCU1000 Series...
  • Page 29 Adjusts the free-run frequency of the IC that converts the SD-SDI return signal from serial to parallel. RV301 PROMPT1 LEV Adjusts the video level of prompter 1 system. RV701 PROMPT2 LEV Adjusts the video level of prompter 2 system. 1-23 (E) . IM/HDCU1000 Series...
  • Page 30 Adjusts the video level of the R (R-Y) output. RV505 B-Y/B LEVEL Adjusts the video level of the B (B-Y) output. RV506 Y/G LEVEL Adjusts the video level of the G (Y) output. * The EN-159A board does not have this function. 1-24 (E) . IM/HDCU1000 Series...

  • Page 31: Notes On Using The Power Supply Unit

    So, the CAMERA fuse needs to be replaced with the Harnesses one adapting to the working power supply voltage. 8. Install the new power supply unit in the reverse order that it was removed. Power supply unit 1-25 (E) . IM/HDCU1000 Series...

  • Page 32: Replacing The Fuse (Hdcu1000/1080)

    4. Remove the fuse from the fuse holder. (Fig. 3) VDA-64C CAMERA fuse HKCU1005 DRX-5 HIF-26 MAIN fuse SDI Output Expansion Unit * : HKCU1003 is the option board for HDCU1000. It is not used for HDCU1080. Two fuse holders Fig.1 Flat-blade Groove screwdriver Fig.3...

  • Page 33: Hdcu1000/1080

    For HDCU1080, install the option board from slot 3 in order for the front side, and from slot 2 in order for the rear side. . Three rear boards VDA-64A/64B/64C of HKCU1003 cannot be installed simultaneously. When using VDA-64A/64B/64C simultaneously, use them together with HKCU1001. . HKCU1003 is the option board for HDCU1000. It is not used for HDCU1080. 1-27 (E) . IM/HDCU1000 Series...
  • Page 34 For HDCU1080, install the option board from slot 3 in order for the front side, and from slot 2 in order for the rear side. . Three rear boards VDA-64A/64B/64C of HKCU1003 cannot be installed simultaneously. When using VDA-64A/64B/64C simultaneously, use them together with HKCU1001. . HKCU1003 is the option board for HDCU1000. It is not used for HDCU1080. 1-28 (E) . IM/HDCU1000 Series...

  • Page 35: Hdcu1500

    VDA-64C EN-159A VDA-64A EN-159B VDA-64B EN-159A VDA-64A VDA-64C EN-159B VDA-64A EN-159A VDA-64A EN-159B VDA-64B When installing the option board, keep the following points in mind: . Install the option board from slot 2 in order. 1-29 (E) . IM/HDCU1000 Series...

  • Page 36: Installing The Option Boards

    . Remove the two screws, and remove the blank panel by the handle. (Store the removed blank panel in a safe place) B3 x 5 B3 x 5 Rear board . HIF-26 . VDA-64A Handle . VDA-64B . VDA-64C Blank panel 1-30 (E) . IM/HDCU1000 Series...

  • Page 37: Hdcu1080

    2. After inserting the option board into the slot, fix the the handle. (Store the removed blank panel in a safe place) option board with two screws. B3 x 5 B3 x 5 Handle Rear board . HIF-26 Blank panel . VDA-64A 1-31 (E) . IM/HDCU1000 Series...

  • Page 38: Hdcu1500

    . Check that the option board is securely connected to the motherboard (MB-1072 board). 3. Fix the option board with the two screws removed at step 1. B3 x 5 Lower grooves Rear board . HIF-26 . VDA-64A . VDA-64B . VDA-64C 1-32 (E) . IM/HDCU1000 Series...

  • Page 39: Installing In 19-Inch Rack (Hdcu1000/1080)

    TEL 604-761111 . Plate nut : 1 pc FAX 604-767190 Sony P/N 3-651-812-00 . Screws for rack mounting (RK5 x 14) : 4 pcs . Washers for rack mounting : 4 pcs Sony P/N 2-297-913-01 1-33 (E) . IM/HDCU1000 Series...
  • Page 40 4. Attach the front and rear brackets to the outside of the rack temporarily using the eight screws (B5 x 8). Rack (front) Rack (rear) 12.7 31.75 Outer rails 12.7 31.75 31.75 Front bracket B5 x 8 Rear bracket B5 x 8 Unit : mm 1-34 (E) . IM/HDCU1000 Series...
  • Page 41 7. After installing the unit in the rack, fix the unit to the rack using the four screws (RK5 x 14) and four ornamental washers. Rack Ornamental washer RK5 x 14 Ornamental washer RK5 x 14 1-35 (E) . IM/HDCU1000 Series...

  • Page 42: Cleaning Of Connector/Cable

    . Alignment sleeve remover HC-001 (for female connector) 2. When the turn stops, pull out the remover in the Sony P/N : J-6480-010-A or straight line forcedly. DCC.91.312.5LA manufactured by Lemo, or equivalent The alignment sleeve can be removed/reinstalled with Insert the shorter nose end when removing/installing the the sleeve itself attached to the tip of the remover.
  • Page 43 Be careful not to tighten the adapter pin too much. pull the adapter pin in the direction of the arrow to remove the adapter from the connector. If no screwdriver is available, use the plate supplied with the connector cap. Adapter Adapter pin 1-37 (E) . IM/HDCU1000 Series...

  • Page 45: System Setup

    Regarding the installation of the optional boards, refer to 1-10 in INSTALLATION MANUAL. The difference of the rear panel and the system connections The rear panel is different according to the serial number of HDCU1000/1080, but the system connection is the same.
  • Page 46 [SD analog I/F added] 3. Standard HD/SD system DRX-5 HIF-26 + Multi interface EN-159B VDA-64B + SDI output expansion (HKCU1003/1005) [HD/SD Film Like system] 4. Standard HD/SD system EN-159B VDA-64A + Multi interface VDA-64C (HKCU1003) [Analog NTSC/PAL system] 2-2 (E) . IM/HDCU1000 Series...
  • Page 47 HD-SDI Monitor SYNC OUT (HD or SD) SD-SDI RETURN SIGNAL HDC1000 HD-SDI RETURN SIGNAL HD/SD-SDI SIGNAL SD-SDI Monitor HDCU1000 Next HDCU1000 HD-SDI Monitor SD REFERENCE SIGNAL SD ANALOG VIDEO SIGNAL CNU-700 Terminated at 75 Z 2-3 (E) . IM/HDCU1000 Series...
  • Page 48 HD-SDI RETURN SIGNAL HD/SD-SDI SIGNAL HDC1000 ANALOG COMPOSITE VIDEO SIGNAL SD ANALOG Monitor VDA-A Waveform Monitor HDCU1000 SD-SDI Monitor Next HDCU1000 HD-SDI Monitor SD REFERENCE SIGNAL SD ANALOG VIDEO SIGNAL CNU-700 Terminated at 75 Z 2-4 (E) . IM/HDCU1000 Series...
  • Page 49 HD-SDI RETURN SIGNAL HDC1000 HD/SD-SDI SIGNAL SD ANALOG Monitor VDA-B SDI OUT FRAME REF IN Waveform Monitor HDCU1000 SD-SDI Monitor HD-SDI Monitor SD REFERENCE SIGNAL Next HDCU1000 SD ANALOG VIDEO SIGNAL CNU-700 Terminated at 75 Z 2-5 (E) . IM/HDCU1000 Series...
  • Page 50 HD/SD-SDI SIGNAL HDC1000 ANALOG COMPOSITE VIDEO SIGNAL VDA-C VDA-A R/R-Y ANALOG COMPONENT VIDEO SIGNAL B/B-Y HDCU1000 Next HDCU1000 VCS-700 Waveform Monitor SD ANALOG Monitor SD REFERENCE SIGNAL SD ANALOG VIDEO SIGNAL CNU-700 Terminated at 75 Z 2-6 (E) . IM/HDCU1000 Series...
  • Page 51 Board name 1. Standard HD/SD system 2. Standard HD/SD system EN-159A VDA-64A + SD analog encoder (HKCU1001) [SD analog I/F added] 3. Standard HD/SD system DRX-5 HIF-26 + SDI output expansion (HKCU1005) [HD/SD SDI system] 2-7 (E) . IM/HDCU1000 Series...
  • Page 52 Monitor HDCU1080 SYNC OUT (HD or SD) SD-SDI RETURN SIGNAL HD-SDI RETURN SIGNAL HDC1580 HD/SD-SDI SIGNAL HD-SDI or SD-SDI Monitor HDCU1080 Next HDCU1080 SD REFERENCE SIGNAL SD ANALOG VIDEO SIGNAL CNU-700 Terminated at 75 Z 2-8 (E) . IM/HDCU1000 Series...
  • Page 53 HD-SDI RETURN SIGNAL HD/SD-SDI SIGNAL ANALOG COMPOSITE VIDEO SIGNAL HDC1580 SD ANALOG Monitor VDA-A Waveform Monitor HDCU1080 HD-SDI or SD-SDI Monitor Next HDCU1080 SD REFERENCE SIGNAL SD ANALOG VIDEO SIGNAL CNU-700 Terminated at 75 Z 2-9 (E) . IM/HDCU1000 Series...
  • Page 54 HD-SDI or SD-SDI Monitor SYNC OUT SD-SDI RETURN SIGNAL HD-SDI RETURN SIGNAL HD/SD-SDI SIGNAL HDC1580 SDI OUT HDCU1080 HD-SDI or SD-SDI Monitor SD REFERENCE SIGNAL Next HDCU1080 SD ANALOG VIDEO SIGNAL CNU-700 Terminated at 75 Z 2-10 (E) . IM/HDCU1000 Series...

  • Page 55: Hdcu1500

    [SD analog I/F added] 3. Standard HD/SD system DRX-5 HIF-26 + Multi interface EN-159B VDA-64B + SDI output expansion (HKCU1003/1005) [HD/SD Film Like system] 4. Standard HD/SD system EN-159B VDA-64A + Multi interface VDA-64C (HKCU1003) [Analog NTSC/PAL system] 2-11 (E) . IM/HDCU1000 Series...
  • Page 56 HD/SD-SDI, ANALOG RETURN SIGNAL SYNC OUT (HD or SD) HDC1000 HD/SD-SDI SIGNAL HD-SDI Monitor HDCU1500 Next HDCU1500 HD/SD-SDI, ANALOG RETURN SIGNAL SYNC OUT (HD or SD) SD REFERENCE SIGNAL SD ANALOG VIDEO SIGNAL CNU-700 Terminated at 75 Z 2-12 (E) . IM/HDCU1000 Series...
  • Page 57 SD ANALOG Monitor HDC1000 VDA-A SDI OUT Waveform Monitor SD-SDI Monitor HDCU1500 Next HDCU1500 HD-SDI Monitor SD REFERENCE SIGNAL SD ANALOG VIDEO SIGNAL HD/SD-SDI, ANALOG RETURN SIGNAL SYNC OUT (HD or SD) CNU-700 Terminated at 75 Z 2-13 (E) . IM/HDCU1000 Series...
  • Page 58 SD ANALOG Monitor VDA-B SDI OUT FRAME REF IN Waveform Monitor SD-SDI Monitor HDCU1500 HD-SDI Monitor Next HDCU1500 SD REFERENCE SIGNAL HD/SD-SDI, ANALOG RETURN SIGNAL SD ANALOG VIDEO SIGNAL SYNC OUT CNU-700 Terminated at 75 Z 2-14 (E) . IM/HDCU1000 Series...
  • Page 59 R/R-Y ANALOG COMPONENT VIDEO SIGNAL B/B-Y HDCU1500 HD/SD-SDI SIGNAL HD/SD-SDI, ANALOG RETURN SIGNAL SYNC OUT(SD) Next HDCU1500 VCS-700 Waveform Monitor SD ANALOG Monitor SD REFERENCE SIGNAL SD ANALOG VIDEO SIGNAL CNU-700 Terminated at 75 Z 2-15 (E) . IM/HDCU1000 Series...

  • Page 60: Setting The System Format

    MULTI FORMAT on page “S02” of the Setup switch : REFERENCE switch (S401) on the AT-167 system menu in the HDCU1000/1080/1500. However, it panel (Factory setting : REM) can also be set with the switches on the AT-167 board.

  • Page 61: Audio System

    2-3-1. Setting the Intercom System board according to the system used. Factory setting : 4W (S603) HDCU1000/1080/1500 can be connected to the intercom RTS (S601) . When the intercom line is 1 channel : lines (producer line and engineer line) of the two indepen- dent systems and can switch them.
  • Page 62 Set switch S4 (FRONT MIC) on the AU-302 board/ From PGM-SEL on page “C05” of the configuration HDCU1000/1080 and switch S5 (FRONT MIC) on the menu, set the PGM audio signal of the headset connected AU-303 board/HDCU1500 according to the type of headset to the front INCOM connector according to user’s...

  • Page 63: Setting The Microphone

    Controlling the Microphone Input Gain Using the Remote Control Setting the Microphone Output Level HDCU1000/1080/1500 can adjust the input gain of the MIC connector of camera HDC1000 series using the remote control in the range of 60 dB to 20 dB in 10 dB steps using either of the following methods.

  • Page 64: Systems

    2-4-1. Setting the Tally System System that does not use CNU-700/500 Use switch S409 on the AT-167 board to set the camera HDCU1000/1080/1500 supports the red tally and the green number. tally. It also supports the MAKING CONTACT and Use switches 1 to 4 to set the first digit and use switches 5 supplying power (24 V/TTL).

  • Page 65: Connecting The Control, Intercom, Tally And Audio Signals

    2-4-3. Connecting the Control, Intercom, Tally and Audio Signals HDCU1000/1080 *1: The slot numbers are different between HDCU1000 and VDA-C VDA-B SDI OUT SDI OUT FRAME HDCU1080. REF IN *2: HDCU1080 does not have this R/R-Y connector block. B/B-Y INTERCOM/...

  • Page 66: Video Signal System

    2-5. Video Signal System Adjusting the Phase of the Sync Signal The equipment that is used for HDCU1000/1080/1500 and Adjust the phase of the output signal to match it with that the HDC1000 series camera system were set to the speci- of the reference signal.

  • Page 67: Setting Aspect Ratio Conversion During Down-Convert

    Set the desired aspect ratio using the MIC REMOTE connector at the rear to L. REMOTE connector at the rear panel of the HDCU1000/ 3. Set pin-13 (ASPECT CTL CONT1) and pin-14 1080/1500, or SD ASPECT on page “S04” of the system (ASPECT CTL CONT2) of the MIC REMOTE menu in the HDCU1000/1080/1500.
  • Page 68 SD SDI format without changing the ratio. The picture that is cut out with the aspect ratio of 13 : 9, is inserted into the 4 : 3 ratio picture and is output in the SD SDI format. 2-24 (E) . IM/HDCU1000 Series...

  • Page 69: Adjusting The Level Of The Vbs Signal (Only When Hkcu1001/1003 Is Installed)

    2-5-5. Adjusting the Level of Signals for (only when HKCU1001/1003 is Waveform Monitor installed) The video output signal of HDCU1000/1080/1500 can be Adjust the level of the VBS signal output from checked on the waveform monitor connected to the WF HDCU1000/1080/1500 using the color bar signal.
  • Page 70 In the system with the MSU-900/950, CNU-700 or VCS- The signal level can be adjusted by using the MSU-900/ 700, the video output signal of HDCU1000/1080/1500 can 950 instead of using the controls of the VCS-700. be checked on the waveform or vector monitor connected to the WF A OUTPUT connector and the WF B OUTPUT 1.
  • Page 71 S411 (SEQ) on the form monitor, perform this adjustment. AT-167 board. When the waveform monitor is connected to HDCU1000/ If adjustment is not possible even after the polarity is 1080/1500, perform the adjustment using controls RV301...

  • Page 72: Adjusting The Level Of Signals For Picture Monitor

    In addition, in the system with the MSU-900/950, CNU- Then perform adjustment using the color bars signal. 700 or VCS-700, the video signal of HDCU1000/1080/ 1500 can be checked on the waveform or vector monitor 1. Press the BARS button of the MSU-900/950, RCP- connected to the VCS-700.

  • Page 73: Setting The Ret Input

    2-5-7. Setting the RET Input Set the format of the return signal to be input to the RET1 to RET4 (HDCU1000/1080) connectors, or the RET 1 to RET 3 (HDCU1500) connectors on the rear panel of the HDCU1000/1080/1500. Configure the setting using RETURN FORMAT on page “S05”...

  • Page 75: Menu Settings

    Camera Diag ROM Version 1. To operate the menu of CCU, open the front panel of HDCU1000/1080/1500, and use the CHARACTER switch, CANCEL/ENTER switch, and +/_ switch on the DTX-5 board. 2. Pressing the CHARACTER switch upward displays the “status display menu” of CCU.

  • Page 76: When Software V1.10 Or Later Version Is Used Without The System Connection Mode Via Ethernet Set

    DATE ROM Version 1. To operate the menu of CCU, open the front panel of HDCU1000/1080/1500, and use the CHARACTER switch, CANCEL/ENTER switch, and +/_ switch on the DTX-5 board. 2. Pressing the CHARACTER switch upward displays the “status display menu” of CCU.

  • Page 77: When Software V1.10 Or Later Version Is Used With The System Connection Mode Via Ethernet Set

    Camera Diag ROM Version 1. To operate the menu of CCU, open the front panel of HDCU1000/1080/1500, and use the CHARACTER switch, CANCEL/ENTER switch, and +/_ switch on the DTX-5 board. 2. Pressing the CHARACTER switch upward displays the “status display menu” of CCU.

  • Page 78: Status Display

    HDCU1080 ** Diagnosis ** A:AT 2:DRX2 OK Slot A to E B:AVP :OK 3:DRX3 OK Slot 1 to 5 4:EN-A OK D:DTX :OK 5:EN2-B:OK 1:DRX :OK HDCU1500 Slot A to C Slot 1 to 3 3-4 (E) . IM/HDCU1000 Series...
  • Page 79 Displays the status of the power supplied to the SDI board. Return Setting:Remote Active Return CH Return Delay :F/S Front Power Active Ret CH :2CH PLD Version Front Power:OK Mode PLD Version:1.01 Done Rear Mode :Normal Power Rear:SDI Power:OK 3-5 (E) . IM/HDCU1000 Series...
  • Page 80 Displays the status of the board attached to the optional board Front None MODE for Slot 6 (front/rear). Rear POWER Rear :VDA-C The display content varies depending on the board installed in the optional slot. 3-6 (E) . IM/HDCU1000 Series...
  • Page 81 HDC1000 R-PNL Version Information about the equipment connected to the rear panel 1.01 05.07.26 F-PNL Version port (RCP/CNU). HDCU1000 1.01 05.07.25 Information about the equipment connected to the front panel R-PNL CNU-700 port. 3.40c15 05.07.15 3-7 (E) . IM/HDCU1000 Series...

  • Page 82: When Software V1.10 Or Later Version Is Used With The System Connection Mode Via Ethernet Set

    HDCU1080 ** Diagnosis ** A:AT 2:DRX2 OK Slot A to E B:AVP :OK 3:DRX3 OK Slot 1 to 5 4:EN-A OK D:DTX :OK 5:EN2-B:OK 1:DRX :OK HDCU1500 Slot A to C Slot 1 to 3 3-8 (E) . IM/HDCU1000 Series...
  • Page 83 192.168. 0.100 Network Diag 3 IP Addr Sets the IP address. *Network Diag 3/3* 8/20 NetMask Sets the netmask. Def GW Sets the default gateway. IP Addr :192.168. 0.101 NetMask :255.255.255. 0 Def GW :192.168. 0.254 3-9 (E) . IM/HDCU1000 Series...
  • Page 84 SD CB SMPTE Front Power :OK PLD Version PLD Status Mode PRE Version:1.00 POST Version:1.00 Rear Config Done :Done Power Mode :Normal The display content varies depending on the board installed in Rear:HIF Power:OK the optional slot. 3-10 (E) . IM/HDCU1000 Series...
  • Page 85 HDC1000 R-PNL Version Information about the equipment connected to the rear panel 1.10 06.09.15 port (RCP/CNU). HDCU1000 1.10 06.09.15 F-PNL Version Information about the equipment connected to the front panel R-PNL CNU-700 3.40c15 05.07.15 port. 3-11 (E) . IM/HDCU1000 Series...

  • Page 86: System Menu

    _99 to 0 to +99 Adjusts the lock phase: SC-phase SUB-REF (EXT-in/NONE) Displays the sub-reference signal input detection. (UNKNOWN/ Displays the format of the sub-reference FrameGate/HD/SD) signal. : The settings in the box are default values. 3-12 (E) . IM/HDCU1000 Series...
  • Page 87 SLOT. SLOT-NO 3&4 OUTPUT Format (*2) 1-1&2: 720/59.94P 2-1&2 OUTPUT Format (*2) . This is an example in HDCU1000. 3&4: M720/59.94P 2-1&2: 525/59.94I . Only Slots 1 to 3 are available in 3&4 OUTPUT Format (*2) 3&4: M525/59.94I : 525/59.94I...
  • Page 88 : The settings in the box are default values. (*3) RET Format In SYSTEM FREQUENCY=1001 1080/59.94I (PsF) 1080/23.97PsF 720/59.94P 525/59.94I (PsF) NTSC In SYSTEM FREQUENCY=1000 1080/50I (PsF) 1080/24PsF 720/50P 625/50I (PsF) ASPECT SQUEEZE EDGE CROP LETTER BOX LB SEL 16:9 15:9 14:9 13:9 3-14 (E) . IM/HDCU1000 Series...
  • Page 89 PHASE : 158 SATURATION: PHASE 0 to 358 Adjusts the phase of MONO COLOR. SATURATION _99 to 0 to +99 Adjusts the saturation of MONO COLOR. : The settings in the box are default values. 3-15 (E) . IM/HDCU1000 Series...

  • Page 90: Configuration Menu

    MF-ARIB (75%) MF-ARIB (100%) MF-ARIB (+I) MF-SMPTE (_I, Q) MF-SMPTE (75%, Q) MF-SMPTE (100%, Q) MF-SMPTE (+I, Q) HD-CUSTOM SDI CHECK FIELD Y -RAMP Y/C-RAMP HD-CUSTOM2 (*5) SD-BARS FORMAT SMPTE FULL NTSC100% Y/C-RAMP Y -RAMP 3-16 (E) . IM/HDCU1000 Series...
  • Page 91 FRONT / REAR Detects and displays the board attached <I/F SETUP> ?C03 TOP SLOT1 BOARD NAME DISPLAY to front/rear of Slots 1 to 6 (HDCU1000) BOARD FRONT REAR SLOT2 BOARD NAME DISPLAY or Slots 1 to 3 (HDCU1500) or Slots 1 to SLOT1:DRX-5 =>...
  • Page 92 WFM LEVEL : CHROMA _99 to 0 to +99 CHROMA: Adjusts the WFM output video level. _99 to 0 to +99 LEVEL CHROMA _99 to 0 to +99 : The settings in the box are default values. 3-18 (E) . IM/HDCU1000 Series...
  • Page 93 Description VIDEO ADJUST 2 (When using two EN-159 boards) When two EN boards are used in the HDCU1000, the following video level adjustment menus are displayed as with the first board. <VIDEO ADJUST 2>?C09 TOP Adjusts the VBS output video level.

  • Page 94: When V1.10 Or A Later Version Of The Software

    MF-ARIB (75%) MF-ARIB (100%) MF-ARIB (+I) MF-SMPTE (_I, Q) MF-SMPTE (75%, Q) MF-SMPTE (100%, Q) MF-SMPTE (+I, Q) HD-CUSTOM SDI CHECK FIELD Y -RAMP Y/C-RAMP HD-CUSTOM2 (*5) SD-BARS FORMAT SMPTE FULL NTSC100% Y/C-RAMP Y -RAMP 3-20 (E) . IM/HDCU1000 Series...
  • Page 95 If you press UP at ESC000 <BAR CHARACTER> C01 TOP <BAR CHARACTER> C01 TOP Editing data at the cursor position Software keyboard $%&'()*+,-./0123456789: $%&'()*+,-./0123456789: ;<=>?@ABCDEFGHIJKLMNOPQR ;<=>?@ABCDEFGHIJKLMNOPQR STUVWXYZ[¥]_ STUVWXYZ[¥]_ INS DEL RET ESC END INS DEL RET ESC END 3-21 (E) . IM/HDCU1000 Series...
  • Page 96 The data entered in this page can be checked in the CCU configuration menu. Cancels the character input mode. On the <C00> COLOR BAR page, set (Same as CANCEL. The selected “BAR-CHARA” to “ON”. character is not reflected.) 3-22 (E) . IM/HDCU1000 Series...
  • Page 97 FRONT / REAR Detects and displays the board attached <I/F SETUP> ?C04 TOP SLOT1 BOARD NAME DISPLAY to front/rear of Slots 1 to 6 (HDCU1000) SLOT2 BOARD NAME DISPLAY or Slots 1 to 3 (HDCU1500) or Slots 1 to BOARD FRONT REAR SLOT1:DRX-5 =>...
  • Page 98 LEVEL _99 to 0 to +99 CHROMA _99 to 0 to +99 : The settings in the box are default values. * : This function has been added to software V1.20 and the later versions. 3-24 (E) . IM/HDCU1000 Series...
  • Page 99 Item Setting Description VIDEO ADJUST 2 When two EN boards are used in the HDCU1000/1080, the following video level (When using two EN-159 boards) adjustment menus are displayed as with the first board. <VIDEO ADJUST 2>?C10 TOP Adjusts the VBS output video level.

  • Page 100: Network Setting Menu

    MCS mode. NETWORK RESET ALL RESET Returns the network-related informa- <NETWORK RESET> ?N03 TOP tion status to the factory default status. ALL RESET : The settings in the box are default values. 3-26 (E) . IM/HDCU1000 Series...
  • Page 102 HDCU1000 (UC) HDCU1000 (J) HDCU1000 (CE) HDCU1000 (E3) HDCU1000 (E2) HDCU1080 (CN) HDCU1500 (SY) HDCU1500 (J) HKCU1001 (SY) HKCU1003 (SY) Printed in Japan Sony Corporation HKCU1005 (SY) J, E 2008. 6 16 9-968-207-05 ©2005...

This manual is also suitable for:

Hdcu1500Hdcu1080Hkcu1001Hkcu1005Hkcu1003

Table of Contents