Table of Contents
Advertisement
Standby Timeout [Disabled]
Suspend
Timeout
In suspend mode, the CPU is stopped and can only be restarted by an
interrupt, for example keyboard, mouse, COM 1/2, hard disk.
Standby CPU
Speed
Fixed Disk
Timeout
CRT
Programming Device PG 740
C79000-G7076-C742-01
No standby mode
[30min]
Minutes after your programming device goes
to standby mode
[1hr][2hr][3hr][4hr] Hours after your programming goes to
standby mode provided no mouse or
keyboard operations have been carried out
[Disabled]
No suspend mode
[30min]
Minutes after your programming device
goes to suspend mode
[1hr][2hr][3hr][4hr] Hours after your programming device goes
to suspend mode provided no mouse or
keyboard operations have been carried out
CPU speed in standby mode:
[Low]
1/16 CPU clock
[Medium]
1/8 CPU clock
[High]
1/4 CPU clock
[Max]
1/1 CPU clock
[1 min] [2 min]
Minutes after the hard disk drive is switched
[3 min] [4 min]
off, if the hard disk is not accessed. If the
[5 min][10 min]
hard disk is accessed after it has been
[16 min]
switched off, an access delay occurs while
the hard disk is booted up again.
[OFF in Standby]
This means that the color display and the
sync signals to the VGA interface are
switched off in standby mode thus also
causing the monitor itself to enter standby
mode.
[ON]
Monitor or display always remain in
operation.
Configuring the PG 740
5-19
5
Hide quick links:
Advertisement
Table of Contents
