hit counter script
Tascam CD-D1X4 Owner's Manual
  1. Manuals
  2. Brands
  3. Tascam Manuals
  4. Disc Duplicator
  5. CD-D1X4
  6. Owner's manual
Tascam CD-D1X4 Owner's Manual

Tascam CD-D1X4 Owner's Manual

Cd duplicator
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CD Duplicator
Professional
Ü
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
ÿ
the user to the presence of uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the pres-
Ÿ
ence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
This appliance has a serial number
located on the rear panel. Please record
the model number and serial number
and retain them for your records.
Model number
Serial number
OWNER'S MANUAL
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
D00680501B

Advertisement

Table of Contents
loading

Related Manuals for Tascam CD-D1X4

Summary of Contents for Tascam CD-D1X4

  • Page 1 CD Duplicator Professional Ü The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert ÿ the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the pres- Ÿ...

  • Page 2: Important Safety Precautions

    When replacing the fuse only a correctly rated approved type should be used and be sure to re-fit the fuse cover. IF IN DOUBT — CONSULT A COMPETENT ELECTRICIAN. TASCAM CD-D1x4 For U.S.A TO THE USER This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

  • Page 3: Important Safety Instructions

    24) Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. TASCAM CD-D1x4 ANTENNA LEAD IN WIRE...
  • Page 4 PASKRIFTEN SITTER PA APPARATEN SOM VISAS SOM UPPMANING OM ATT APPARATEN OMFATTAR EN INBYGGD LASERKOMPONENT. DETTE MARKAT ER ANBRAGT SOM VIST I ILLUSTRATIONEN FOR AT ADVARE BRUGEREN OM AT APPARATET INDEHOLDER EN TASCAM CD-D1x4 PXR-550X Manufacturer: MITSUMI Electric Co., Ltd. Laser output: Less than 0.1 mW (play) on the objective...

  • Page 5: Table Of Contents

    Track extraction... 16 Copy-protection... 17 Audio playback... 17 Erasing discs... 18 Finding out about your CD-D1x4 ... 18 Finding out the main unit version number...18 The Session Mode option ... 19 Cascading ... 19 8 – Error messages and troubleshooting To clear an error...20...

  • Page 6: Introduction

    (up to 16 times), using easily-obtainable, low- cost CD-R or CD-RW media, with no auxiliary equipment or computer system required. Another CD-D1x4 may be slaved to the first in order to provide an eight-drive unit (see “Cascading” on page 19).

  • Page 7: About Cd-R And Cd-Rw Discs

    CD- RW disc has been written, it can be erased and reused. Note that the CD-D1x4 may not be able to use CD- RW media that have been erased by other models of Installing the CD-D1x4 The CD-D1x4 is designed to fit into 4U of standard 19”...

  • Page 8: Parts Of The Cd-D1X4

    2 – Parts of the CD-D1x4 Front panel 1 STANDBY/ON switch Press this switch once to power on the unit, and again to turn it to standby mode. There is also a power switch on the rear panel which must be switched on first.

  • Page 9: Rear Panel

    2 – Parts of the CD-D1x4 A POWER switch puters, the CD-D1x4 has two power switches, one at the rear of the unit and one at the back. Make sure that this switch is on before turning on the front panel switch.

  • Page 10: Care Of Recordable Media

    It is important that you do not use CD lens cleaners (including CD-R or CD-ROM lens cleaners) with the CD-D1x4. The reason for this is that the drives in this unit rotate at a much higher speed than those of an...

  • Page 11: Basic Operations

    NOTE Do not turn off the CD-D1x4 while writing to, or erasing any target disc (e.g. part of the way through a disc copy operation). If you do, the disc will be corrupt, and unus- able.

  • Page 12: Additional Copy Modes

    ( MO DE CHA NG E) TASCAM CD-D1x4 CD-D1x4. Once this has been done, no further data can be written to the disc. In the case of a CD-RW disc which has been final- ized, the whole of the disc may be erased, and the disc re-used.

  • Page 13: Disc Copy

    Setting the writing speed The CD-D1x4 slave drives are capable of writing information to CD-R or CD-RW discs at one of three speeds: FAST 16...

  • Page 14: Copying The Disc

    Do not use warped discs or discs with off-center holes with the CD-D1x4. While the copy operation is in progress, make sure that the CD-D1x4 is not subjected to vibration or mechanical shocks. You may press and hold the onds or more to abort the copying process. However, note that this will make the target discs unusable for further operations.

  • Page 15: Simulation

    The CD-D1x4 starts to read and analyze the source disc. A NAL YZI NG disc tray and...

  • Page 16: Other Functions

    E XT R AC T T RAC K? 2 /1 4 1 4: 56 TASCAM CD-D1x4 The screen above shows that the current track is track 2, out of a total of 14 tracks on the source disc. Press...

  • Page 17: Copy-Protection

    Copy-protection The CD-D1x4 allows copy-protection to be applied to audio discs produced using the unit. There are three settings: • (single-generation copying), 1GENERATION where one digital copy (“child”) can be made from the recorded disc, but no digital copies (“grandchil- dren”) can be made from the child.

  • Page 18: Erasing Discs

    T AR G ET D I SC Finding out about your CD-D1x4 In the event of any questions about your CD-D1x4, you may need to discover the drive type and firm- ware versions of the five drives installed in the unit.

  • Page 19: The Session Mode Option

    If you turn off the SLAVE unit when two units are con- nected in cascade mode, the MASTER unit cannot be used. 7 – Other functions ) so far. Note that discs TOTAL 1 32 1 1 33 4 on the Slave Mode TASCAM CD-D1x4...

  • Page 20: Error Messages And Troubleshooting

    CODE xxxx Make a note of the number represented by and contact your TASCAM supplier (the number is used by the service engineers, and may be shown together with another message). is shown if an error occurs SOURCE ANALYZE while analyzing the source disc.

  • Page 21: Specifications

    Korea 220VAC @ 60 Hz, 380 mA (80 W) Europe/UK 230 VAC @ 50 Hz, 380 mA (80 W) Australia 240 VAC @ 50 Hz, 380 mA (80 W) 482 mm (19 in) 466 mm (18.3 in) 430 mm (16.9 in) TASCAM CD-D1x4...
  • Page 22 Phone: (03) 9672-2400 Facsimile: (03)9672-2249 TEAC ITALIANA S.p.A. Phone: 02-66010500 CD-D1x4 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada Campesinos No. 184, Colonia Granjes Esmeralda, Delegaacion Iztapalapa CP 09810, Mexico DF 5 Marlin House, Croxley Business Park, Watford, Hertfordshire. WD1 8TE, U.K.

Table of Contents