Page 1
» CD-VT1 Portable CD Vocal Trainer OWNERʼS MANUAL is appliance has a serial number located on the rear panel lease record the model number and serial number and retain them for your records odel number _____________ erial number _____________...
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. — TASCAM CD-VT1 FOR U.S.A. TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital de- vice, pursuant to Part 15 of the FCC Rules.
Do not install this apparatus in a confined space such as a book case or similar unit. • The apparatus draws nominal non-operating power from the AC outlet with its POWER switch in the off position. Important Safety Instructions TASCAM CD-VT1 —...
TACT YOUR NEAREST QUALIFIED SERVICE PERSONNEL, AND DO NOT USE THE PROD- UCT IN ITS DAMAGED STATE. Optical pickup: Type KSM-900AAA Manufacturer: SONY CORPORATION Laser output: <1 mW play on the objec- tive lens Wavelength: 775—816 nm — TASCAM CD-VT1...
First steps with your CD-VT1... 5 Making connections ... 7 Using the menus... 9 Using the CD player... 10 Pitch and tempo changes ... 12 Using effects... 13 Facts & figures (specifications) 15 First steps with your CD-VT1 About this manual hen we refer to a key or connector...
Page 6
First steps with your CD-VT1 hen the battery level drops the unit automatically shuts down and must be restarted with the POWER switch after the batteries have been replaced ote that the battery indicator on the display only provides a rough estimate of remaining battery life...
You should NEVER connect the speaker out- puts of a bass or guitar amplifier to anything except speakers. If you are in any doubt at all about what you can connect to your CD-VT1, ask someone who knows. Outputs onnect the unit to a stereo systems ...
hen a menu is not selected you can use the keys to set the relative balance of the micro — TASCAM CD-VT1 The CD plays at a fixed level, but the MIX Use the INPUT feature (5 and b keys...
0, –8, –16, –32, –50 PLAY ALL/SGL MENU CUE/FLS Using the menus Notes sets key change in semitones sets key change in cents sets slow speed audition speed all or single play cue or “flash play” operation TASCAM CD-VT1 —...
is being scanned by the unit after being loaded NOTE The CD-VT1 cannot play unfinalized CD-R/ RW discs. In addition, some finalized CD-R/ RW discs may be unplayable on the CD-VT1. Playback ress the playpause key to Á/π...
Page 11
the feature does not work and on some s the effect is more pronounced than on others se the VOCAL CANCEL switch at the side of the unit to turn the effect on or off TASCAM CD-VT1 —...
e low peed udition mode slows down the tempo without chang ing the key e settings are off – — TASCAM CD-VT1 – – and – all percent hen this mode is active the display left side shows ...
Page 14
VCHG OFF se the and fl keys to set the voice changer to up or down ress the key to exit the DISPLAY/ESC voice changer mode — TASCAM CD-VT1...
Page 15
AA batteries x 4 (NiMH or alkaline) Power consumption 4W (PS-PS5 AC adapter) Dimensions (w x d x h) 232 x 138 x 40 including feet (mm) 9.1 x 5.4 x 1.6 (in) Weight (excluding 620g / 1lb, 6oz batteries) TASCAM CD-VT1 —...
Page 16
17 Rue Alexis-de-Tocqueville CE 005 92182 Antony Cedex FRANCE +33-1-42-37-01-02 TEAC ITALIANA S.p.A. Via C Cantu 11 20092 Cinisello Balsamo Milano ITALY +39-02-66010500 TEAC AUSTRALIA PTY., LTD. 280 William St Melbourne Victoria 3000 AUSTRALIA +61-3-9672-2400 CD-VT1 Printed in China MA-0838 www.tascam.com www.tascam.com www.tascam.com www.tascam.com www.tascam.co.uk www.tascam.de www.tascam.fr...