Removing And Installing The Graphics Card - Siemens SIMATIC IPC1047 Operating Instructions Manual
Hide thumbs
Also See for SIMATIC IPC1047:
- Operating instructions manual (136 pages) ,
- Quick install manual (2 pages)
Table of Contents
Advertisement
Expanding and assigning parameters to the device
6.3 Expansion cards
6.3.5
Removing and installing the graphics card
Below as example for the NVIDIA Quadro P5000 graphics card.
Requirement
● The device is open in accordance with section "Open the device. (Page 53)".
● Tx10 screwdriver
● Phillips screwdriver
Procedure
Danger of injury by rotating parts
The fan blades rotate in the self-ventilated graphics card. Even after the device is switched
off, the fan blades continue to rotate for a while. There is a risk of injury at the rotating parts
of the fan, e.g. through cutting.
• Wait until the fan blades come to a standstill.
• Only then should you remove the graphics card.
Removal
1. Remove the two screws
the expansion card.
Also remove the two screws of
the card retainer
outside.
76
WARNING
①
③
on the
of
Operating Instructions, 07/2019, A5E45118479-AB
SIMATIC IPC1047
Advertisement
Table of Contents
