A-12
SETTING UP THE TV / MAKING CONNECTIONS
(Only UC9*)
1 Insert the cover holder attached to the AV port cover
into the hole of the main body of the product as
illustrated.
2 Attach the AV port cover by inserting it into the
left hole of the port. (The cover remains attached
through the use of a magnet.)
1
AV Port Cover
2
CAUTION
y If you do not attach the cover holder, the cover may
fall off and cause injury.
MAKING CONNECTIONS
This section on MAKING CONNECTIONS mainly uses
diagrams for the UB85** models.
Antenna Connection
(*Not Provided)
Cover
Holder
Wall Antenna Socket
English
Connect the TV to a wall antenna socket with an RF
cable (75 Ω).
NOTE
y Use a signal splitter to use more than 2 TVs.
y If the image quality is poor, install a signal
amplifier properly to improve the image quality.
y If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
y An antenna cable and converter are not
supplied.
y Supported DTV Audio: MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
y This TV cannot receive UHD (3840 x 2160
pixels) broadcasts directly because the related
standards have not been confirmed. (Depending
on model)
IN
ANTENNA / CABLE