Table of Contents
Advertisement
Configuring the Cisco AM GW 3610
Configuring the Cisco AM GW 3610
Step one: Log in to the gateway
All administration of the gateway is performed via the web interface.
1
Use your browser to navigate to the IP address of the gateway (to discover the IP
address, refer to the previous section).
2
Type the user name
3
Leave the password field empty.
4
Click
.
Log in
Cisco recommends that you change the admin account to use a password
i
as soon as possible. To do that, go to
enter the required information in the
Step two: Configure a proxy server
Currently, only the Cisco VCS is supported as a proxy server to the gateway. The
gateway must be configured as a neighbor zone of each Cisco VCS in the proxy list
that is running software version X6.1 or earlier – this is not needed for any
Cisco VCS that is running software version X7 or later. See the Cisco VCS product
support pages on
The IP address of the proxy server must also be added to the list of proxies on the
Cisco AM GW 3610. To do this:
1
Log in to the gateway web interface and go to
2
Click
Add new proxy
3
Enter the name and IP address of the Cisco VCS and click
10
.
admin
Cisco.com
for information about configuring the Cisco VCS.
.
, click the admin user and
Users
Change password
.
Proxies
Add proxy
pane.
.
Advertisement
Table of Contents
