Safety Information Safety Information Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of...
Page 4
Safety Information CAUTION: No naked flame sources, such as lighted candles, should be placed on the apparatus. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION: Do not block any ventilation openings.
Page 5
Safety Information CAUTION concerning the Power Cord The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible. Check the specification page of this owner’s manual to be certain of the current requirements. Do not overload wall outlets.
Page 6
Safety Information This device is equipped with a portable battery or accumulator. How to Safely remove the batteries or the battery pack from the equipment: To Remove the old batteries or battery pack, follow the assembly steps in reverse order. To prevent contamination of the environment and bring on possible threat to human and/or animal health, the old batteries or the battery pack must be put in an appropriate container at designated collection points.
Page 7
Safety Information Product storage and maintenance y Do not drop the charging cradle or the charging adapter into a drain or sink or place it in a place where it may fall into water or other liquids. Do not use a charging cradle in the shower or immerse in water.
Page 8
Safety Information IMPORTANT SAFETY NOTICE The cord grip for the plug fitted to this product is built into the existing power cord as supplied. If, for any reason you need to shorten the cord. DO NOT RE-USE THE PLUG. A new plug must be used to ensure your continued safety by securing the plug to the power cord in accordance with Plug &...
Page 9
Safety Information To reduce the risk of injury y Before using the device, if you are currently undergoing dermatology related treatment or have skin problems, consult your dermatologist and then use it. y Please consult with your dermatologist for specific symptoms such as allergies and sensitive skin.
Page 10
Safety Information y Do not use this device during the last two months if your skin is recovering due to skin related procedures, cosmetic surgery, or procedures for hair loss. Please use it after consultation with a specialist. y As a facial treatments only, it is not recommended to use for a body.
Page 11
Safety Information y Please use the device after consultation with a specialist surely. - Cardiovascular disease - Endocrine abnormality - A person with epileptic - Sensory nervous system symptoms abnormality - A person taking hormone - Skin disease imbalance medication - Ophthalmology and - If you have other illnesses, surgery (LASIK, LASEK,...
Page 12
Safety Information y Pregnancy, menstruation, lactating women are not recommended for use. (Unstable hormonal balance may cause temporary skin trouble.) y Do not allow people to use who can not clearly express their own will, including infants. y Do not use the device if you have an abnormality in the sensory system.
Page 13
Safety Information y Do not use this unit immediately after shaving. y Do not use this unit while driving or walking. y Do not use the head with the head stopped at one place, but please use it according to the guide of this manual.
Page 14
Safety Information y Please follow recommended hours of use when long time use because there is a possibility of a low-temperature burn. y Do not expose the LED light of the UV head protection cap directly. Excessive exposure to the light can cause eye and skin damage.
Page 15
Safety Information y Do not use when medical electronic device such as medical monitoring equipment is nearby or if you have implanted an electronic devices such as cardiac pacemakers. y If you have a metal prosthetic device such as a straightener or a dental implant, avoid this area.
Page 16
Safety Information Q&A “ What cosmetics should I buy and use for each mode in the product? ” To make your skin cleaner, it is effective to use Cleansing (cleansing) mode before using Boost (absorption promotion) mode. It is recommended to use this mode with a moisture gel. Boost (absorption promotion) mode is a process that helps the active ingredients in cosmetics penetrate the skin.
Page 17
Safety Information “ What should I do if I feel dry? ” - Please reduce the frequency of use in a week. - It is recommended to use moisturizing cream or mask pack for moisturizing immediately after use. - If you are taking medication, consult your health care professional before using this medicine to induce skin dryness.
Setting up Setting up Unique features Complex absorption promotion - The combined function of iontophoresis and ultrasonic waves helps absorption of active ingredients in cosmetics more effective than manual care. - The warm massage function relieves skin tension and smoothly applies cosmetics to help naturally absorb.
Setting up Notification Symbols used in this manual Note Indicates special notes and operating features. > Caution Indicates cautions for preventing possible damages from abuse.
Setting up Parts UV head Charging cradle protection cap Unit Charging adapter Coin / Button type battery (3) USB cable Pouch Owner’s manual / Quick start guide...
Operation Operation Cleansing Mode To make your skin cleaner, it is effective to use this mode before using absorption promotion mode. 1. Start the cleansing mode after remove makeup and wash the face. 2. After wash the face, please use this appliance with plenty of water gel on the area of your face or device head to be used.
Page 24
Operation 5. Follow the voice guidance function, slowly cleanse your face like gently wiping away from around your eyes. - Cleansing consists of 5 steps for 3 minutes. (Forehead Nose Chin Left cheek Right cheek Power off) When you hear the voice guidance or a sound effect, gently move the device head around the forehead from bottom to top for about 45 seconds.
Page 25
Operation When you hear the voice guidance or a sound effect, slowly move the device head from your nose to your chin. Gently cleanse the chin area from bottom to top for about 30 seconds. When you hear the voice guidance or a sound effect, use the device to gently cleanse your both cheeks area from bottom to top and your under both...
Page 26
Operation Note y It is effective to use this mode before using absorption promotion mode. y The water gel is sold separately. We recommend using a moisturizing gel which is suitable for your skin type. y If you set the voice guidance function to mute, the unit doesn’t provide voice guidance and sound effect guide.
Operation Absorption promotion Mode The complex function of the mode helps the penetration of active substances contained in cosmetics. 1. Wash your face before starting absorption promotion mode. 2. Before using this product, apply cosmetics (such as vitamin C serum) to pat on the cleansed face to permeate. 3.
Page 28
Operation 5. Slowly care the area of your desired like gently wiping from top to bottom depending on the skin texture. 6. This unit automatically turns off after 3 minutes of care time. 7. After use, wipe the unit with a dry towel, and put the UV head protection cap on the head and store the unit.
Operation Charging the battery Charging Charge the battery enough before using the unit. > Caution y Always use the provided charging adapter. y Using other charging adapters may cause malfunction and cannot be repaired. 1. Connect the charging adapter using USB cable. 2.
Operation Checking the charging status When you place the unit on the charging cradle, you can check the charge status of the battery through the battery status LED. Status Battery is charging. Green Battery is fully charged. - Operating time : Approx. 1 and a half hours - Fully charged time : Within 3 hours Note y Operating time may vary depending on the battery and...
Operation Checking battery status When you disconnect the unit from the charging cradle, you can check the battery charge status via the battery status LED. If the power turned on, you can check the charging status by pressing 1 button. The battery status LED will change depending on the battery charging status.
Operation How to use the unit Changing Care mode Pressing the MODE button while this unit is turned on changes the care mode. Each MODE LED lights according to the care mode. mode Status and effect To make your skin cleaner, it is effective CLEANSING to use this mode before using absorption (Cleansing)
Operation Voice guidance function Each time when you press and hold 1 button (until you can hear the voice guidance) while this unit is turned on, the voice guidance function changes. Change voice guidance function order Voice guide(basic) Sound effect guide Guide off (Mute) Setting the language To change the language setting of the voice guidance function,...
Operation UV lamp function How to use the UV head protection cap Attach the UV head protection cap to the unit. UV lamp function is started. The UV lamp function operates for up to 25 seconds. It may vary depending on the remaining amount of coin / button battery. Note y The UV LED is operated again when the UV head protection cap is detached and attached again during operation.
Page 35
Operation Battery replacement of UV head protection cap > Caution Do not open the battery cover with your fingernail. Your nails may break. ※ When replacing the batteries, three CR2025 sized coin / button batteries are required. 1. Open the cover of the UV Open head protection cap by turn- ing it counterclockwise.
Page 36
Operation 3. Insert the three batteries with the (+) electrode of the battery facing up. Close 4. Place the inner cap on the UV head protection cap and turn it clockwise. 5. Place the cover on the UV Close head protection cap and turn it clockwise.
Page 37
Operation Caution DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD. > Caution y The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, incinerate, or heat above 100 °C. Replace the battery part no.
Temperature of unit y No action is required. rises during use. y But, if you feel the unit is much hotter than your body temperature, then stop the skin care and contact LG Electronics customer care center.
Appendix Appendix Specifications Power supply (AC Adapter) : - Input : 100 V - 240 V ~ 50 / 60 Hz - Output : 5 V 0 1.8 A or 5 V 0 2.0 A Dimensions (W x H x D) : - Approx.
Appendix Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean y Do not use volatile liquids such as insecticide spray near the unit.
Page 41
Beauty Product Warranty Policy (1)LG Electronics Hong Kong Limited (hereafter “LGEHK”) provides Warranty Period (hereafter “Period”) from the date of purchased are as follows and only valid for Beauty Product purchase in Hong Kong / Macau only (any promotion gift item is not included): i.
Page 42
(6)All parts replaced within the warranty period are the property of LGEHK. We have rights to handle those parts as necessary. All changed parts are non-returnable. (7)Warranty will be voided under the following conditions, and LGEHK reserves the right to refuse providing service and/or shall demand charges for any costs of servicing from customer: i.
Page 43
(9)Our company will not be liable for any loss and damage directly or indirectly caused by the breakdown of the product. (10)This warranty card is restricted within Hong Kong SAR / Macau SAR only. (11)LGEHK and its Authorized Service Centers reserve the right to use refurbished or reconditioned parts or whole products for the same or functionally equivalent model when conducting product repairs and replacement.