Table of Contents
Advertisement
JA-101K(-LAN)(-LAN3G) and JA-106K(-3G)
A control panel is a fundamental part of the JABLOTRON 100 series alarm system and is designed to protect
small, medium or large premises and complies with security grade 2 requirements. The control panel has BUS
and/or wireless device (when the system is equipped with a radio module) compatibility. It is recommended that
only JABLOTRON 100 devices are used with the system. Proper functionality cannot be guaranteed when using
third party devices.
Caution: The JABLOTRON 100 security system can only be installed by a trained technician with a valid
certificate issued by an authorized distributor.
The manual is intended for trained technicians and is valid for control panel firmware LJ60418 and
MD60418 and the configuration software F-Link 1.4.0 or higher.
Contents
1
Basic description and definitions ................................................................................................................ 4
1.1
Basic system configuration requirements ........................................................................................... 7
1.2
Access codes and their default settings ............................................................................................. 9
1.2.1
Change of access codes ............................................................................................................ 9
1.2.2
Security access codes and RFID devices ................................................................................. 10
1.2.3
Regular system check (maintenance) ....................................................................................... 10
2
System size............................................................................................................................................. 12
2.1
External size .................................................................................................................................... 12
2.2
Internal size (system range) ............................................................................................................. 12
2.2.1
Configuration and splitting ........................................................................................................ 13
3
Types of control panels, utility parameters ............................................................................................... 14
3.1
Description of JA-101K(-LAN)(-LAN3G) / JA-101KR(-LAN)(-LAN3G) ............................................... 15
3.2
Description of JA-106K(-3G) / JA-106KR(-3G) ................................................................................. 16
3.3
Indication LEDs on the control panel board ...................................................................................... 18
3.4
Additional Connectors on the control panel PCB .............................................................................. 18
3.5
Connection terminals on the control panel PCB................................................................................ 18
4
Before system installation ........................................................................................................................ 19
5
Installation of BUS devices ...................................................................................................................... 20
5.1
JA-100 BUS ..................................................................................................................................... 20
5.2
BUS cables...................................................................................................................................... 20
5.3
BUS layout ...................................................................................................................................... 21
5.4
BUS branching and splitting ............................................................................................................. 21
5.5
BUS length and numbers of connected devices ............................................................................... 21
5.6
Calculation of line losses ................................................................................................................. 22
5.7
Example of a voltage loss calculation: .............................................................................................. 22
5.8
Example of calculation of BUS consumption to back-up the system ................................................. 23
5.9
Power supply requirements .............................................................................................................. 24
5.10
Backup requirements ....................................................................................................................... 24
5.11
BUS isolation ................................................................................................................................... 24
5.12
Use of existing cabling in refurbishment projects. ............................................................................. 25
6
Use of wireless devices ........................................................................................................................... 25
6.1
Installation of a JA-11xR radio module ............................................................................................. 25
6.2
Installation of wireless devices - enrollment mode ........................................................................... 25
7
Switching the system ON......................................................................................................................... 26
8
System configuration ............................................................................................................................... 26
8.1
The system profiles .......................................................................................................................... 26
8.2
Control panel operation modes ........................................................................................................ 30
8.3
Authorisation of users ...................................................................................................................... 31
8.4
System optional parameters ............................................................................................................ 31
8.4.1
Enrolling and erasing devices ................................................................................................... 33
8.4.2
List of applicable reactions ....................................................................................................... 34
8.4.3
Limitation of false alarms .......................................................................................................... 35
8.5
Types of alarms ............................................................................................................................... 37
Security System Control Panels
Advertisement
Table of Contents
Related Manuals for jablotron JA-101K
Summary of Contents for jablotron JA-101K
-
Page 1: Table Of Contents
Security System Control Panels A control panel is a fundamental part of the JABLOTRON 100 series alarm system and is designed to protect small, medium or large premises and complies with security grade 2 requirements. The control panel has BUS and/or wireless device (when the system is equipped with a radio module) compatibility. - Page 2 PSTN Settings ........................86 10.11.4 Restart GSM ......................... 87 10.12 ARC tab............................87 10.12.1 JABLOTRON 100 CID and SIA codes ................... 88 10.12.2 Setting the transmission of photos to external storage ............90 10.13 Diagnostics tab ..........................91 Other F-Link options ..........................92 11.1...
- Page 3 MyJABLOTRON web application ......................106 15.1 Management of installations and offers for an installation technician ..........106 15.2 WEB-Link application (configuration)....................107 System takeover by the user....................... 108 Technical specifications ........................109 JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 3 / 110 MLJ51410...
-
Page 4: Basic Description And Definitions
MyJABLOTRON & MyCOMPANY – is a unique web-based service that provides online access to devices through the JABLOTRON Cloud. It is designed both for end users (MyJABLOTRON) and for installation technicians (MyCOMPANY). For more information about the registration of control panels and service availability in your country, please contact your distributor or an ARC. - Page 5 If communication with a wireless device is lost, the control panel indicates communication fault. Radio modules check RF jamming/interference on the JABLOTRON 100 system communication band. If the band is jammed, the system triggers a Fault.
- Page 6 (ARC) or to the MyJABLOTRON service that is equipped with reception technology for the JABLOTRON protocol. In the control panel settings you can select which communication type will be primary and which will be used as a backup.
-
Page 7: Basic System Configuration Requirements
The main gate or entrance gate and also the main door are protected by a magnetic contact. The garage door and rear door as well. The whole building with perimeter and garage is protected by one section only and the system keypad is placed at the entrance hall*. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 7 / 110... - Page 8 Going through the Main door activates the Delay A time (20 sec) and it shortens the entrance time (if delay B or delay C are not shorter than delay A). JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 8 / 110...
-
Page 9: Access Codes And Their Default Settings
„User“ authorization and the checked parameter „Code change allowed“ has an option to edit his own code. Access codes can be changed by: LCD keypad (PC has to be disconnected from the control panel, no remote or local connection) JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 9 / 110... -
Page 10: Security Access Codes And Rfid Devices
Using 6 or 8-digit code(s) Select a higher level of authorization such as “Card confirmation with a code” or “Double authorization” Using Jablotron contactless RFID cards / tags (JA-19xJ) The control panel counts the attempts at wrongly entered codes and if the 10 attempt is reached, the system triggers the tamper event “Code breaking attempt”... - Page 11 Service technician Once per year control panel after 5 minutes of no mains power. Programmable outputs Test of functions; RF range of wireless Service technician Once per year (PG) modules JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 11 / 110 MLJ51410...
-
Page 12: System Size
Authorisation to access some of the defined sections has to be added to each user. Sections can be linked to other sections to control them and their statuses in common. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 12 / 110... -
Page 13: Configuration And Splitting
(1st level) and it does not have to include any detectors. Unsetting this virtual section also automatically unsets all the common premises sections (2nd and 3rd level) where she can move. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... -
Page 14: Types Of Control Panels, Utility Parameters
The RJ connector is only used to connect the radio module directly in the control panel. Can be extended using Maximum BUS cable length 500 m 2 x 500 m the JA-110T modules JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 14 / 110 MLJ51410... -
Page 15: Description Of Ja-101K(-Lan)(-Lan3G) / Ja-101Kr(-Lan)(-Lan3G)
Description of JA-101K(-LAN)(-LAN3G) / JA-101KR(-LAN)(-LAN3G) The JA-101K-xxx control panel is designed for small BUS systems (limited by the output of the power supply) and for medium-sized systems with wireless communication (JA-101KR-xxx). All variants of the JA-101K control panels are equipped with a GSM communicator for a 2G network, for reporting voice messages, SMSes, and GPRS data packets. -
Page 16: Description Of Ja-106K(-3G) / Ja-106Kr(-3G)
8 - GSM antenna connector; 9 - SIM card holder; 10 - Panel Lid Tamper pins; 11 - Power supply input from the transformer Parts of the JA-101K control panel (changeable parts) are: MicroSD card 4GB or higher – meant as storage to save events, pictures from PIR detectors... - Page 17 1 - Mains power terminals, 400 mA fuse; 2 - Transformer; 3 – Back-up battery; 4 - Attachment strap of the back-up battery; 5 - cabling space; 6 - GSM antenna; 7 - Panel lid tamper pins. Including spare tamper pins; 8 - Control panel PCB Parts of the JA-101K control panel (changeable parts) are: MicroSD card 4GB or higher...
-
Page 18: Indication Leds On The Control Panel Board
There is a one special connector on the JA-101K (LAN) designed for a tamper contact to be connected. It indicates any attempt at damaging the front cover or opening the control panel. A rear tamper contact is not included for this version of control panel. -
Page 19: Before System Installation
BUS components of the control panel all the power supply of the control panel must be completely off. The control unit JA-101K (-LAN) provides power supply terminals to select from 2 type of power supply voltage networks: ~230 V / 50 Hz and ~110 V / 60 Hz. According to the type of power supply voltage system, the correct connection terminal and the corresponding fuse must be used in comply with chapter no. -
Page 20: Installation Of Bus Devices
Connect BUS devices using a Jablotron CC-01, CC-02 or CC-03 cable or equivalent. The Jablotron CC-01 cable is designed for the main BUS line, or the connection of elements with a high consumption (siren) or remote elements. The cable has 4 wires (the colours corresponding to the BUS colour). -
Page 21: Bus Layout
The cable is supplied in packs per 300 m. The Jablotron CC-03 cable is designed for the main BUS line, or the connection of elements with a high consumption (siren) or remote elements. The cable has 8 wires (8-wire) that are split as follows: The power supply conductors (red and black) have a bigger cross-section of 0.7 mm... -
Page 22: Calculation Of Line Losses
Deduct individual losses from the supply voltage to determine the voltage at the line end. Always consider the voltage of 12 V from the control panel during mains supply failure operation. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 22 / 110... -
Page 23: Example Of Calculation Of Bus Consumption To Back-Up The System
The table presents an example of a small system with 14 devices. The total idle consumption in the backup mode is 78 mA. Thus you can use the JA-101K(-LAN) control panel, which enables maximum permanent loading of 125 mA / 85 mA. For larger BUS systems use the JA-106K control panel. -
Page 24: Power Supply Requirements
Imax = 1.2 A – 0.09 A = 1.1 A (subtract the control panel self-current 0.09 A) JA-101K control panel, for 2.6 Ah battery (calculation is valid for 80% of battery capacity) 2.6 Ah * 0.8 / 12 h = 0.17 A (according to the capacity - maximum current for 12 hrs) Imax = 0.17 A –... -
Page 25: Use Of Existing Cabling In Refurbishment Projects
Wireless devices have to be enrolled to the system for instance by a production code. The enrollment procedure can be performed in Enrollment mode only using a PC with installed F-Link software. See chapter 8.4.1 Enrolling and erasing devices. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 25 / 110... -
Page 26: Switching The System On
2. Only correct system design (using the right devices) and correct installation with CLC/TS 50131-7 requirements and ARC service implementation can ensure security grade 2. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 26 / 110... - Page 27 In the case of a harmful event, the insurance company doesn´t have to pay for the damage because of broken regulations and an incorrectly programmed system caused by the installation company. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 27 / 110...
- Page 28 Indicate Unset status Keypad Indicate Set status Keypad Alarm acoustic indication Keypad Entrance delay acoustic indication Keypad Exit delay acoustic indication Remote controllers Control functions limitation Calendar Control function limitations JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 28 / 110 MLJ51410...
- Page 29 Low Batt in control panel Failure of battery in control panel AC fault AC fault for 30 minutes System in configuration GSM fault LAN fault PSTN fault Fault of all ARCs JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 29 / 110 MLJ51410...
-
Page 30: Control Panel Operation Modes
Fault is a warning signal of the system which indicates some abnormal state FAULT of the control panel, communicators or devices and their power problems (mains power or battery) or communication troubles. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 30 / 110 MLJ51410... -
Page 31: Authorisation Of Users
Code with prefix – This function determines the way of entering all access codes during user´s authorization. When enabled the system requires entering of a 1 or 3-digit prefix followed by * before you enter your 4,6 or 8 JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... - Page 32 Reset of the control panel is described in chapter 12 Reset of the control panel. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels...
-
Page 33: Enrolling And Erasing Devices
1400-00-0000-0123). The number can also be read with an optical barcode reader. Subsequently, you should activate the detector to verify its enrollment. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 33 / 110 MLJ51410... -
Page 34: List Of Applicable Reactions
The system reacts to triggering a detector (alarm, entrance delay) when partially set as an Instant zone, and when fully set as a Delayed A zone. Instant confirmed Instant intrusion alarm – see the chapter 8.4.3 Confirmed intrusion reaction below. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 34 / 110 MLJ51410... -
Page 35: Limitation Of False Alarms
Confirmed reaction can only be used if a higher number of intrusion detectors are installed in the building (to enable confirming). JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 35 / 110... - Page 36 ARC. If he does it in time, nothing will be reported. This delay is only related to an alarm triggered by a delay zone. Other alarm types (instant, fire, tamper, etc..) are reported immediately with no delay regardless of this function. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 36 / 110...
-
Page 37: Types Of Alarms
A tamper alarm can also be the loss of BUS devices (by short circuit for instance), or by a code breaking attempt (10x) on the keypad, remotely and via a phone call using DTMF, an SMS message or using the MyJABLOTRON smart applications (WEB + smartphone). JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 37 / 110... -
Page 38: Fire Alarm
LCD keypad and by pressing the option “Cancel warning indication”. If disabled, a currently running alarm can be cancelled only by valid user authorization with access rights to that section with no requirement to unset that section. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 38 / 110... -
Page 39: System Faults
When the fault of all the lost devices is restored then the system cancels the fault and tamper alarm. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 39 / 110... -
Page 40: System Control Options
PG outputs using segments or if he can only browse the system status and history log using an LCD keypad menu. Every user can have the following options assigned to authorize himself: JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... -
Page 41: System Control By Keypad
MyJABLOTRON app. Detectors are pre-set to an Instant / Delay A reaction in this case. Partial setting is indicated by a yellow colour on the segment or by a square around the digit on the LCD keypad display. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 41 / 110... - Page 42 Cancelling this indication can be performed by further pressing of the green button on the segment with authorization to cancel this indication or using the LCD keypad menu and selecting the option “Cancel warning indication”. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 42 / 110...
-
Page 43: System Control By Remote Control
Button lights yellow ON If the fault is followed by a rotating Jablotron logo on the LCD keypad it represents a fault of radio communication between the control panel and the keypad. -
Page 44: System Control By A Calendar
(regardless of how long the exit time has been set in the control panel), within this time all partially alarm zones behave like a delayed zone. The control panel doesn´t fully respect all ways of setting and checking the systems ready to be set rules. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 44 / 110 MLJ51410... -
Page 45: System Control Via Communicator Voice Menu (Gsm / Pstn)
Control of PG outputs is not possible via the voice menu. Caution: Makes sure nobody is present in the protected premises before you set the system remotely. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 45 / 110... - Page 46 2 (3,4,5) – “To record messages of report A (B, C, D), press 2 (3, 4, 5)“ and then “Press star (*)“ 9 – “To delete all recorded messages, press 9.” # – „To return to the main menu, press #.“ JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 46 / 110...
-
Page 47: Sms Commands
Diacritics parameter on the Communication tab should be enabled for correct and reliable functioning. It is also necessary to mind small and capital letters when diacritics are enabled. With usual characters size doesn´t matter. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 47 / 110... - Page 48 Section 6: Set; Name and status of Section 7 Section 7: Set with an active zone, Name and status of Section 8 Section 8: Set with an active zone; JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 48 / 110 MLJ51410...
-
Page 49: Controlling The System Via F-Link Or J-Link
Control is also possible from the “Section” tab in the “status” column or from the lower status bar. The system records system control according to authorization upon user authorization in the software. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... -
Page 50: Control From The Myjablotron Web App
So almost the same function range as in the MyJABLOTRON web application. For some platforms it offers much more, for instance for iOS it is Touch ID instead of a code. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 50 / 110... -
Page 51: Control By Duress Access Control
Pulse detector triggering (e.g. detectors: motion, glass-break, tilt, shock and suchlike) cannot prevent setting. System informs you about setting with an active zone by SMS report (to group of users with predefined alarm reports) with a detailed description. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 51 / 110... -
Page 52: Unsuccessful Setting
To cancel the indication of unsuccessful setting it is necessary to select in the LCD keypad menu an option called “Cancel warning indication” or if the “Default” system profile has been pre-set then by setting that section. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... -
Page 53: Overview Table Of Groups Of Events Reported To Users
(event time, event) Door magnet, Ground floor (detector name, section name) 17:01:25, Instant alarm (event time, event) Staircase movement, Upstairs (detector name, section name) Time 17:01 22.7. (time of sending) JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 53 / 110 MLJ51410... -
Page 54: System Acoustic Indication
Every system user whom should have limited access according to the pre-set calendar has an enabled option i.e. “Time limited access” by the option from “Access 1” to “Access 4” and it represents every single group of users. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 54 / 110... -
Page 55: Disabling And Blocking Options
(there is the risk of false alarm creation because of windows opened by draft for instance). JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... -
Page 56: Non-Alarm Functions - Functions Of
The JA-150EM-DIN impulse counter is for this purpose in combination with some measuring device (electricity meter, gas meter, hydrometer, etc.). See our application studies and recommendations in MyCOMPANY, MySTORAGE section. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 56 / 110... -
Page 57: Setting The System Through F-Link Sw
The JABLOTRON 100 system is exclusively programmed using a computer, through F-Link software. F-Link checks the current version of the software from version 1.4.0 through updates from the Jablotron server and the latest version is automatically offered for download. Or after the login it can be downloaded from the MyJABLOTRON web interface at www.myjablotron.com. - Page 58 3. Getting the Activation Code from your distributor. When asking for the Activation Code you will need to provide the registration code of the control panel. Depending on country, the activation code can be also found on the package box of the control panel. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 58 / 110...
-
Page 59: Starting The F-Link Software And Setting The System Size
To make changes in this tab you do not need to be in the Service mode. During the first start of the F-Link SW the Wizard will gradually guide you through the setting of all parameters of the system. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... - Page 60 There can be 4,6 or 8-digit codes. When the code length is changed then Service and Administrator codes are set to the default values and earlier pre-set codes are erased. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 60 / 110...
-
Page 61: Sections Tab
(it changes the section state – set / unset / set…). Note – it allows you to describe details of a section for easier orientation during annual inspections etc. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... -
Page 62: Devices Tab
Memory indication – possibility of alarm memory indication by a signal lamp in the detector that has released the alarm. It can be activated for devices that support this function (in the default setting it is always off). JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... -
Page 63: Keypad Configuration
You can conveniently use the PT-P700 label printer from Jablotron, which enables automatic cutting by the required label dimension. - Page 64 (party set) = yellow. There may be max. 2 common segments on one keypad at the most. Sections are assigned to the Common Segment in the top Common Segment tab. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 64 / 110...
-
Page 65: Settings Tab
Exit delay slow intermittent beeps (1/s) Exit delay when partly set slow intermittent beeps (off by default) Segment status change acoustic indication with one beep at a change JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 65 / 110 MLJ51410... - Page 66 (green) button it is cancelled. When authorization is enabled then it is required for activation and deactivation as well. The delay is adjustable from 1 sec to 255 sec. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 66 / 110...
-
Page 67: Common Segment Tab
Common Segment indication: All sections unset = green, all sections fully set = red, any section set (party set) = yellow. Sections are assigned to the Common Segment in the top Common Segment tab. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... -
Page 68: Example Of Settings Of An Internal Siren
PG output triggered by opening the door. Test – button for a 3 second test of acoustic and optical alarm indication JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... -
Page 69: Users Tab
Note – makes it possible to describe a user’s details, e.g. authorization of access outside working hours etc. Time-limited access – the button serves for setting up time –limited access, see chapter 9.15 Time limited access for users. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 69 / 110... -
Page 70: Pg Outputs Tab
Both the blocking options (by a section and device) can be used at the same time. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... -
Page 71: Activation Map Of A
By dialling in from user’s tel. numbers – defining users that are authorized to activate a PG output by calling from their phone (phone numbers are entered in the Users tab). Phone numbers used for the ringing JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... - Page 72 22. Any detector triggered except a 10. Tamper alarm 34. Event in system delayed one 11. Alarm memory 23. Delayed detector triggered 12. Unconfirmed alarm 24. Bypass in a section JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 72 / 110 MLJ51410...
-
Page 73: Reports To Users Tab
30 minutes, setting with an open zone, or possibly a report about an unset section without motion (see the Sections tab) JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... - Page 74 When a valid code has been entered, the alarm is stopped and the next user is not called any more. Voice calling is time-consuming and it can be set for a limited number of users (JA-101K-xx - 8 users / JA-106K-xx - 15 users).
- Page 75 / deactivation SMSes and an option for recording reports from A to D in the event memory used as a zone reaction, see chapter 8.4.2 List of applicable reactions. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 75 / 110...
-
Page 76: Parameters Tab
Time and date are taken from the GSM provider with every logging in to the GSM Time adjustment* network From the Jablotron server Time and date are adjusted automatically according to communication server. Option does nothing when the type of communication is set to “Without remote programming”... - Page 77 This selection is suitable e.g. for the use of detectors with a 24hour reaction or flood detectors that are found in a section where setting/unsetting is not necessary. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 77 / 110...
- Page 78 DELAYED or NEXT DELAYED reaction type. An active element with any other alarm reaction CANNOT this way. ATTENTION!!! this also applies to remote control (Voice menu, SMS, MyJABLOTRON, action through calendar). JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 78 / 110 MLJ51410...
- Page 79 When the faults of all the lost devices are restored then the system cancels the fault and tamper alarm. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 79 / 110 MLJ51410...
- Page 80 15 sec to send an alarm report to the ARC. Delayed report to ARC A user has 15 sec more to unset the system without triggering an alarm reported to the ARC. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 80 / 110 MLJ51410...
-
Page 81: Calendars Tab
Blocked PG outputs cannot be controlled from the segment or with an SMS. PG number* – Specifies which output/s will be enabled or disabled. Blocking –PG outputs are offered here, their activation allows blocking a calendar action. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 81 / 110... - Page 82 Delayed reaction during this 3 min period. If you select Unsetting, unsetting is executed immediately without an exit delay and all the loops are active immediately (including delayed detectors). JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 82 / 110...
-
Page 83: Communication Tab
There must be functional data communication in the control panel (LAN or GSM/GPRS). - Jablotron communication – the device communicates with the manufacturer’s server (MyJABLOTRON application) and continuously sends information about the device status to it. Thus, if F-Link (J-Link) sends a request for remote connection, the server is immediately ready to establish connection. -
Page 84: Gsm Settings
Network APN* – GPRS data communication settings. Data communication provides access to services of the Jablotron server, enables remote access of a service technician, communication with the ARC etc. Besides the APN settings the used SIM card must support data transmission. -
Page 85: Lan Settings
Get IP address from the DHCP server - automatic setting of network parameters. If this function is not supported by the network, the respective parameters must be entered manually. Manual entry is only possible if this option is deselected. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 85 / 110... -
Page 86: Pstn Settings
Detection of busy tone – if the communicator detects the engaged tone, e.g. in a parallel line, it will hang up and inform the system. You are not recommended to enable this parameter as the communicator does not detect hanging up. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 86 / 110... -
Page 87: Restart Gsm
ARC Technician authorization level. The option is also unavailable if Communication Jablotron is selected, which considerably simplifies setting of the communication part of the system. To make changes in this tab you do not need to be in the Service mode. -
Page 88: Jablotron 100 Cid And Sia Codes
10.12.1 JABLOTRON 100 CID and SIA codes SIA Event EN Report category 1101 QA Health problem Burglary 1110 Fire alarm Fire 1118 FG Unconfirmed fire alarm Fire 1120 Panic alarm Panic 1130 Instant alarm Burglary 1133 24H alarm Burglary 1134... - Page 89 End of device bypass (deactivation) Uncategorised 3572 Tamper bypass end Tamper 3573 Activation bypass end Uncategorised 3574 End of section bypass (deactivation) Uncategorised 3578 Fault bypass (deactivation) Faults and service events JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 89 / 110 MLJ51410...
-
Page 90: Setting The Transmission Of Photos To External Storage
IMG server. The creation of the account and its operation is free of charge. The procedure is described in the manual of the modules that work with this technology (JA-120PC, JA-160PC and other future verification devices). JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 90 / 110... -
Page 91: Diagnostics Tab
JA-11xR radio module). Colour coding of the GSM signal: 0-30% red, 40-50% yellow and over 50% green. Colour coding of the RF signal: 10% red, 20% yellow, 30% and higher green. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 91 / 110... -
Page 92: Other F-Link Options
The system can be controlled locally and also remotely (set and unset) by clicking on the icons representing system status in the lower toolbar and in the Section tab by buttons there as well. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... -
Page 93: Event History
Filter Settings – the filter allows you to obtain only desired information by time, by event type, sections, users, devices or PG outputs in a very detailed way. Filters can be combined to increase searching efficiency in deep history. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 93 / 110... -
Page 94: System Settings
7. If you make a change to a setting, it will be indicated with blue text (the name of the tab will become blue, too). The blue indication will disappear as soon as you save the changes. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... - Page 95 (it may take up to 180 s.). in the Devices tab The Service mode is not on Older versions of F-Link may not have support for new types of devices JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 95 / 110 MLJ51410...
-
Page 96: Rf Signal
FDR suffix and the button can be used to import it back for viewing. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 96 / 110 MLJ51410... -
Page 97: Building Map
(it is automatically pre-entered from the database that was used to program the control panel), phone number of the SIM card in the control panel JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... -
Page 98: Installation Wizard
(offer, acceptance record, invoice etc.). In the ext. field the installation technician may fill in notes and information obtained during the assembly that may be useful e.g. in case of system extension. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 98 / 110... -
Page 99: Firmware Update
A firmware update or change makes it possible to change the behaviour of updatable devices (control panel, radio modules, keypads, detectors etc.) with a package that the manufacturer officially releases in the Jablotron sever. F-Link downloads from the Jablotron server automatically (after a query), if in the F-Link menu the Automatic Updates item is activated (in the default setting it is activated). -
Page 100: Reset Of The Control Panel
SD card. If Reset was not executed correctly, the control panel will keep the original settings without changes. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... -
Page 101: Firmware Updates
13 Firmware updates The control panels and some other devices of the JABLOTRON 100 system enable a firmware change. Firmware is usually changed to extend the useful parameters of the equipment. 13.1 General firmware update rules (FW) A change can only be performed with a computer with the installed F-Link SW either with the use of local access via a USB cable or remotely where the possibility to change firmware is limited to BUS devices. -
Page 102: Fw Updates For Wireless Devices
(set / unset / service). This data is necessary e.g. for communication with the technical consultant for which the Save for Sending button in the bottom right corner is designed JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 102 / 110... - Page 103 The figure below shows a part of the Info Window that provides necessary technical data, e.g. for solving problems concerning compatibility or functions of individual devices. The button in the bottom part allows you to save data and to e.g. send them to a technical consultant. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 103 / 110...
-
Page 104: Supplementary Information
JA-111N PG module of a signal 5/25 5/25 Relay switched ON / OFF output relay JA-111SH Vibration or tilt detector JA-112E RFID access module JA-113E Access module with a keypad and RFID JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 104 / 110 MLJ51410... -
Page 105: Control Panel Currents Overview
Consumption in the AC power Control panel (mA) supply mode (mA) JA-101K Small GSM control panel JA-101K (with LAN enabled) Small GSM/LAN control panel JA-106K Large GSM control panel ( JA-106K (LAN enabled) Large GSM/LAN control panel 14.3 Control panels dimensions... -
Page 106: Myjablotron Web Application
15 MyJABLOTRON web application The Jablotron web application is a unique service that provides users and installation technicians with online access to devices produced by Jablotron. Jablotron customers can use it for administration of their systems. End users of alarms can use it to control and monitor their device. It provides installation technicians with a powerful tool that allows them to monitor and administer all installed alarms and to comfortably create quotations for new installations. -
Page 107: Web-Link Application (Configuration)
The installer can be informed of changes via SMS or e-mail. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels... -
Page 108: System Takeover By The User
The technician creates a report about the annual check performance and this can serve the insurance company. The annual check being due can be indicated to the customer automatically by an LCD keypad. JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 108 / 110... -
Page 109: Technical Specifications
Caller’s identification ETSI EN 300 089 JABLOTRON ALARMS a.s. hereby declares that these control panels JA-101K(-LAN) and JA-106K meet the basic requirements and other relevant provisions of the Directives no. 2014/53/EU, 2014/35/EU, 2014/30/EU and 2011/65/EU. You will find the original Declaration of Conformity at www.jablotron.com. - Page 110 NOTES: JA-101K(-LAN)(-LAN3G) and JA-106K(-3G) Security System Control Panels 110 / 110 MLJ51410...