Advertisement
Quick Links
MOUNTING LOCATION:
Right side of radio
TOOLS REQUIRED:
7mm nut driver
7mm open-end wrench
Medium & short/medium
Phillips screwdrivers
HARDWARE INCLUDED:
None
INSTRUCTIONS FOR GRAND AM/GRAND PRIX 96-98 ONLY:
STEP #1
Remove two Phillips screws from the rear inside of the utility compartment located above the shifter
console.
STEP #2
Remove two Phillips screws from the molding above the instrument cluster. Release the main molding
bezel which surrounds the radio and climate control. Pull at the top right corner of the radio; pull back
far enough to remove the 7mm Hex/Torx head screw from the right side of the radio mounting.
STEP #3
Place the InDash Mount over the bezel from inside the radio opening and position the mounting hole
over the open hole of the radio mounting. Place the 7mm Hex/Torx screw through the InDash Mount
and into the radio mounting hole and tighten with the 7mm open end wrench. Snap bezel back into
place and reinstall screws.
STEP #4
Install phone holder to InDash Mount with the supplied Hex head screws. If using a PortaGrip Model
#701, adjust it to the size of the phone prior to mounting.
INSTALLATION IS NOW COMPLETE. ENJOY YOUR NEW PANAVISE INDASH MOUNT.
Grand AM 1999 Mount
(SEE OTHER SIDE FOR THE GRAND AM/GRAND PRIX 99 INSTRUCTIONS)
C
P
& M
ELL
HONE
EDIA
I
I
NSTALLATION
NSTRUCTIONS
PART#:
75114-296
MFG:
PONTIAC
MODELS & YEARS:
GRAND AM
96-2000
GRAND PRIX
97-2001
M
* * ADVISEMENT * *
OUNT
Read instructions completely prior to
starting installation. All InDash Mounts
are designed so that after installation, phone
is facing normal driver position for left-
hand drive vehicles. This mount is not
designed to be used in foreign countries
with right-hand drive vehicles. Use extreme
care when working around the plastic
components on the dash. Excess force,
can cause breakage of the plastic
components.
Grand Prix 2001 Mount
I-75114-296
Page 1 of 2
Advertisement
Related Manuals for Panavise Indash 75114-296
Summary of Contents for Panavise Indash 75114-296
- Page 1 Install phone holder to InDash Mount with the supplied Hex head screws. If using a PortaGrip Model #701, adjust it to the size of the phone prior to mounting. INSTALLATION IS NOW COMPLETE. ENJOY YOUR NEW PANAVISE INDASH MOUNT. Grand AM 1999 Mount...
- Page 2 08-29-00 There may be recent updates to this Instruction Sheet, please visit our website or contact PanaVise Products, Inc. for the latest revision as well as for the most complete up-to-date PanaVise InDash Applications List: 7540 Colbert Dr., Reno, NV, Phone: 800.759.7535, 775.850.2900, Fax: 800.395.8002, www.panavise.com...